Rich Solar MEGA 50 Solar Panel
For more info: 800-831-9889
MEGA 50 SOLAR PANEL
50W Maximum Power Output
30 CELLS Monocrystalline Module
0~+5W Positive Power Tolerance
22.8% Maximum Efficiency
Features:
- 10 busbar solar cell configuration
- Lightweight anodized aluminum frame
- High transmission, AR (anti-reflective) coated tempered glass
- Industry standard quick connect cables (Solar Connectors) work in series or in parallel
- Excellent low light performance on cloudy days, mornings and evenings
- Highly reliable due to stringent quality control (Over 30 in-house tests (UV, TC, HF, and many more), PID resistant, 100% EL double inspection)
- Certified to withstand challenging environmental conditions (2400 Pa wind load, 5400 Pa snow load, 35 mm hail stones at 97 km/h)
Installation
Easy installation and handling for various applications (high-end off-grid and mobile applications).
Pre-drilled holes compatible with ground mounts, Z brackets, pole mounts and tilt mounts.
Compatible with on-grid and off-grid inverters.
Warranty
25 years warranty limited output power
* (Please refer to product warranty for details)
Electrical Data (STC)
| Peak Power Watts-PMAX (Wp) | 50 W |
| Power Output Tolerance-PMAX (W) | 0~+5 W |
| Maximum Power Voltage-VMPP (V) | 17.6 V |
| Maximum Power Current-IMPP (A) | 2.84 A |
| Open Circuit Voltage-VOC (V) | 20.8 V |
| Short Circuit Current-ISC (A) | 3.13 A |
| Maximum System Voltage | 1000 VDC |
| Maximum Series Fuse Rating | 10 A |
| Module Efficiency η m (%) | 22.8% |
STC: Irradiance 1000 W/m², Cell Temperature 25 °C, Air Mass AM = 1.5
Mechanical Data
| Solar Cells | Monocrystalline 7.2 x 1.8 in (182 × 45.5 mm) |
| Module Dimensions | 22.8 x 20.5 x 1.2 in (580 × 520 × 30 mm) |
| Cell Orientation | 30 cells (3 x 10) |
| Weight | 8.0 lb (3.6 kg) |
| Glass | 3.2 mm (0.13 in), High Transmission, AR Coated Tempered Glass |
| Backsheet | White |
| Connector | Solar Connectors |
| Frame | Anodized Aluminum Alloy |
| Junction Box | IP 67 rated |
| Cables | Photovoltaic Technology Cable 4.0 mm² (#12 gauge), 23.6 in (600 mm) Length |
Temperature Ratings
| Nominal Operating Cell Temperature (NOCT) | 45°C (±2°C) |
| Temperature Coefficient of PMAX | -0.39%/°C |
| Temperature Coefficient of VOC | -0.29%/°C |
| Temperature Coefficient of ISC | 0.05%/°C |
Curve Characteristics
A graphical representation shows the relationship between voltage, current, and power for the solar panel under standard test conditions. The graph displays two curves: one for current (Amperes) versus voltage (Volts), and another for power (Watts) versus voltage (Volts).
Current vs. Voltage: The current remains relatively constant as voltage increases until it reaches the maximum power point, after which it drops sharply as voltage continues to increase towards open circuit voltage.
Power vs. Voltage: The power output increases with voltage, reaches a peak at the maximum power point (MPP), and then decreases as voltage further increases towards open circuit voltage.
Certifications: UL, CULUS, FCC, CE
Specifications included in this datasheet are subject to change without notice.
© 2025 RICH SOLAR ALL RIGHTS RESERVED
