Home | Lightware Visual Engineering
Installation Guide for LIGHTWARE models including: TX106, TX106A, RX106, TX107, RX107, RX107 Point Extender, RX107, Point Extender, Extender
File Info : application/pdf, 2 Pages, 4.97MB
DocumentDocumentFront and Rear View - Transmitter (TX) Front View 1 2 34 5 6 Quick Start Guide TX106 / TX106A models have one, TX107 model has two Gigabit Ethernet connectors. Only TX106A model is built with an analog audio output port. Rear View 78 9 er HDMI-TPX-TX106, -TX106A HDMI-TPX-RX106 HDMI-TPX-TX107 HDMI-TPX-RX107 TX106 / TX106Amodels are built with 12V, TX107 model is built with 48V DC input connector. Important Safety Instructions Please read the supplied safety instruction document before using the product and keep it available for future reference. Introduction The HDMI-TPX-106 and HDMI-TPX-107 series extenders with AVX technology are Lightware's future-proof development and a natural progression from the widely popular HDMI-TPS-TX/ RX97 series, allowing users to extend HDMI 2.0 signals up to 4K60 4:4:4 video resolution through a single CATx cable over distances of up to 100 meters. HDMI-TPX-TX106A model is featured with audio de-embedding function via the 5-pole Phoenix® Combicon analog audio port. Beyond the benefits of sending high-resolution video over long distances, the extenders are also capable of handling various connectivity standards, including bi-directional RS-232 and command injection over IR (output only) as well. The Gigabit Ethernet port is also a valuable addition, allowing users to connect an additional device to the network directly through the TPX extender. HDCP 2.3 and basic EDID management functionality are also among the features offered by these devices, such as their connectivity and easy integration into a wide range of AV operations and compatibility with 3rd party devices. Compatible Devices The product is compatible with all Lightware TPX series models and any third-party AVX devices. Front and Rear View - Receiver (RX) Front View 1 23 RX106 model is built with one, RX107 model is built with two Gigabit Ethernet connectors. Rear View q8 w er RX106 model is built with a 12V, RX107 model is built with a 48V DC input connector. Box Contents Transmitter / receiver device 12V DC adaptor with interchangeable plugs 1 48V DC adaptor with interchangeable plugs 2 Phoenix® Combicon 3-pole Phoenix® Combicon 5-pole connector connector 3 SWaafertryanatnyd Info Quick Start Guide Safety & Warranty Info; Quick Start Guide 1 Only for HDMI-TPX-TX106, HDMI-TPX-TX106A and HDMI-TPX-RX106 units. 2 Only for HDMI-TPX-TX107 and HDMI-TPX-RX107 units. 3 Only for HDMI-TPX-TX106A unit. Status LEDs POWER/LIVE off blinking between 50% and 100% brightness (green) VIDEO SIGNAL off on (green) EDID STATUS on (green) on (yellow) blinking (red) Device is not powered. Transmitter / Receiver Device is powered on and operational. Transmitter / Receiver No video signal detected on the HDMI input (TX) or HDMI output (RX) port. Video signal is detected on the HDMI input (TX) or HDMI output (RX) port. Transmitter Learned EDID is emulated on the HDMI input port. Transparent EDID is emulated on the HDMI input port. Error occured during the EDID emulation. It may be caused by: EDID emulation cannot be set correctly. Device cannot apply transparent EDID emulation. 1 Gigabit Ethernet port 2 IR out 3 Status LEDs 4 EDID Status LED 5 EDID button 6 Analog audio output 7 HDMI input 8 Factory reset button 1GBase-T RJ45 connector for user Ethernet purpose. TRS (3.5mm jack) output connector for an Infrared emitter unit. The LEDs give immediate feedback about the current status of the extender. See the details in the Status LEDs section. The LED gives immediate feedback about the current status of the EDID emulation. See the details in the Status LEDs section. Two EDID emulation modes can be selected with the button: Learned and Transparent. Short press: switch between transparent and stored user EDID. Long press: learn and store EDID from the output of the receiver. 5-pole Phoenix connector for balanced analog audio output. HDMI input port with HDMI 2.0 support for source devices. Hidden button for setting the device to factory default values. 9 TPX output q HDMI output w TPX input e RS-232 port r 12V / 48V DC input RJ45 connector for AVX output signal transmission. See more details about the connector in the Power Supply Options and the Status LEDs sections. HDMI output port with HDMI 2.0 support for sink devices. RJ45 connector for AVX input signal. See more details about the connector in the Power Supply Options and the Status LEDs sections. 3-pole Phoenix connector for bi-directional serial communication. DC input for local powering. Connector types by models: HDMI-TPX-106 series: 12V DC input with locking connector. HDMI-TPX-107 series: 48V DC input with 2-pole Phoenix connector. TPX INPUT/OUTPUT off on (green) blinking (yellow) Transmitter / Receiver No connection is established between the transmitter and the receiver units. Connection is established with 10G / 5G / 2.5G bandwith. Link training is in progress. TPX INPUT/OUTPUT off blinking (green) Transmitter / Receiver No data transmission on the port. Data transmission is active. GIGABIT ETHERNET - LEFT LED Transmitter / Receiver on (green) Connection is established with 100Mbps bandwith. blinking (green) Data transmission is active. GIGABIT ETHERNET - RIGHT LED Transmitter / Receiver on (green) Connection is established with 1Gbps bandwith. blinking (green) Data transmission is active. Power Supply Options HDMI-TPX-106 series TPX106 series extenders are able to supply remote power to each other over the TPX connector. The TPX106 series devices can be powered in any of the following ways: 1. Local adaptor for both TX and RX 2. Local adaptor and remote power to RX 3. Local adaptor and remote power to TX 12V DC Power Power adaptor send 12V DC Power Power adaptor send TRANSMITTER TRANSMITTER TRANSMITTER HDMI-TPX-TX106/TX106A HDMI-TPX-TX106/TX106A 12V DC Power CATx adaptor CATx (AVX) (AVX) HDMI-TPX-TX106/TX106A 12V DC Power CATx adaptor (AVX) HDMI-TPX-RX106 HDMI-TPX-RX106 HDMI-TPX-RX106 HDMI-TPX-107 series TPX107 series extenders fulfill PoE PD standard, which means the TPX port can receive power over the Ethernet line. HDMI-TPX-107 series extenders are not able to send remote power to each other. The TPX107 series devices can be powered in any of the following ways: 1. Local adaptor for both TX and RX 2. Remote power via matrix board to TX 3. Remote power via matrix board to RX MX2M series matrix with MX2M-4TPX-IB MX2M series matrix with MX2M-4TPX-OB 48V DC CATx Power (AVX) adaptor TRANSMITTER HDMI-TPX-TX107 48V DC Power adaptor CATx (AVX) Power send TRANSMITTER HDMI-TPX-RX107 HDMI-TPX-TX107 CATx (AVX) Power send HDMI-TPX-RX107 TAKE CARE OF ME I AM THE ONE AND ONLY USER DOCUMENT FOR THIS PRODUCT Lightware Visual Engineering PLC. Budapest, Hungary sales@lightware.com +36 1 255 3800 support@lightware.com +36 1 255 3810 ©2023 Lightware Visual Engineering. All rights reserved. All trademarks mentioned are the property of their respective owners. Specifications are subject to change without notice. Further information on the device is available at www.lightware.com. Doc. ver.: 1.3 19210103 Specification General Compliance....................................................................................................CE, UKCA EMC (Emission).....................................................................EN 55032:2015+A1:2020 EMC (Immunity)...................................................................EN 55035:2017+A11:2020 Electrical safety.................................................................................. EN 62368-1:2020 RoHS .....................................................................................................EN 63000:2018 Warranty ............................................................................................................. 3 years Operating temperature ...................................................0° to +50°C (+32° to +122°F) Operating humidity ......................................................... 10% to 90%, non-condensing Cooling ................................................................................................................passive Power Power supply option (TPX106 series).............. Power adaptor / 12V remote powering Power supply option (TPX107 series).................................... Power adaptor / PoE PD Supported power source .........................................................100-240 V AC; 50/60 Hz Power consumption (TPX106 series, without remote power) .................................7 W Power consumption (TPX106 series, with remote power).................................... 16 W Power consumption (TPX107 series) ....................................................................11 W Heat dissipation (TPX106 series, without remote power)............................23.9 BTU/h Heat dissipation (TPX106 series, with remote power).................................54.6 BTU/h Heat dissipation (TPX107 series).................................................................37.5 BTU/h Power Adaptor (TPX106 series) Supplied power............................................................................................12V DC, 2A AC power plug ............................................ Interchangable (EU, UK, JP/US, AUS/NZ) DC power plug................................................ Locking DC connector (2.1/5.5 mm pin) Power Adaptor (TPX107 series) Supplied power.........................................................................................48V DC, 0.8A AC power plug ............................................ Interchangable (EU, UK, JP/US, AUS/NZ) DC power plug .......................................................................2-pole Phoenix connector Enclosure Rack mountable........................................................... yes, with mounting accessories Enclosure material........................................................................................ 1 mm steel Dimensions (mm / inch).................100.4 W x 131.9 D x 26 H (3.95 W x 5.19 D x 1 H) Weight....................................................................................................476 g (1.05 lbs) Video Ports HDMI input/output Connector type ...........................................................19-pole HDMI Type A receptacle AV standard ...................................................................................... DVI 1.0, HDMI 2.0 HDCP compliance ..........................................................................................HDCP 2.3 Color space................................................................................................ RGB, YCbCr Supported resolutions at 8 bits/color * ........................up to 4096x2160@60Hz (4:4:4) Audio formats................... 8-channel PCM, Dolby TrueHD, DTS-HD Master Audio 7.1 CEC support .................................................................................................transparent TPX input/output Connector type ..................................................................................... RJ45 connector Power over Ethernet (TPX106 series) ........................................ 12V remote powering Power over Ethernet (TPX107 series) ......................................PoE PD (IEEE802.3af) Data rate ...................................................................................................... 10GBase-T Compliance................................................................................................. SDVoE AVX HDCP compliance ..........................................................................................HDCP 2.3 Transferred signals ........................................Video, Audio, RS-232, Infrared, Ethernet Color space................................................................................................ RGB, YCbCr Video latency (TPX output)............................................0 frame (five lines/ under 8ms) Compression ratio (TPX output)..................................................................... 1.4 to 1 ** Supported resolutions at 8 bits/color * ........................up to 4096x2160@60Hz (4:4:4) Audio formats................... 8-channel PCM, Dolby TrueHD, DTS-HD Master Audio 7.1 * All standard VESA, CEA and other custom resolutions up to 600MHz (HDMI2.0) are supported. ** Compression is applied only if the AV signal is above HDMI 1.4 standard. Audio Ports Analog audio output (HDMI-TPX-TX106A) Connector type ......................................................................5-pole Phoenix connector Audio formats.........................................................................................2-channel PCM Sampling frequency.............................................................................................48 kHz Signal transmission .............................................................................. Balanced signal Control Ports Ethernet port Connector type ......................................................................... RJ45 female connector Number of connectors per unit (106 series / 107 series)........................................1 / 2 Ethernet data rate...............................................1GBase-T, full duplex with autodetect Power over Ethernet (PoE) ..................................................................... Not supported RS-232 serial port Connector type ......................................................................3-pole Phoenix connector Default settings...................................................................................9600 BAUD, 8N1 Infrared output port Connector type ............................................................. 3.5mm TRS (approx. 1/8" jack) Output signal.................................................................................... Modulated (38kHz) Operation mode ...............................Command injection (only with 3rd-party software) Mechanical Drawings The following drawings present the physical dimensions of the HDMI-TPX-100 series extenders. Dimensions are in mm. Front View GIGABIT ETHERNET VIDEO IR SIGNAL OUT 26 1 2 POWER/ LIVE 100.4 Bottom View 16.45 67.5 16.45 32.5 M3 thread 131.8 Ventilation ¢ Pay attention to the ventilation holes when designing the system. Top and side ventilation holes must not be covered. Connecting Steps Transmitter Side Media player Infrared emitter Audio amplifier RS-232 HDMI in IR out Audio out HDMI-TPX-100 series transmitter GIGABIT ETHERNET IR OUT 1 2 EDID STATUS EDID Power Ethernet TPX Receiver Side 4K TV Infrared emitter RS-232 HDMI out IR out GIGABIT ETHERNET IR OUT 1 2 HDMI-TPX-100 series receiver Power Ethernet Power adaptor Ethernet switch TPX HDMI in Audio out Ethernet Transmitter Side Connect a CATx cable between the TPX output port of the transmitter and the TPX input port of the receiver. Connect the source (e.g. media player) to the HDMI input port of the transmitter by a HDMI cable. Optionally for analog output: connect an audio device (e.g. audio amplifier) to the analog audio output port by an audio cable. Only HDMI-TPX-TX106A model is built with an analog audio output port. Connect the device to a LAN network. IR out RS-232 Power Optionally for Infrared extension: connect an IR emitter to the IR OUT port of the transmitter. Optionally for RS-232: connect a device (e.g. media player) to the RS-232 port. Powering on the devices is recommended to do as the final step during the installation. Please check the Power Supply Options section for the details. Power adaptor Ethernet switch TPX HDMI out Ethernet Receiver Side Connect a CATx cable between the TPX output port of the transmitter and the TPX input port of the receiver. Connect the sink (e.g. 4K TV) to the HDMI output port of the receiver by a HDMI cable. Connect the device to a LAN network. IR out RS-232 Optionally for Infrared extension: connect an IR emitter to the IR OUT port of the receiver. Optionally for RS-232: connect a device (e.g. 4K TV) to the RS-232 port. Power Powering on the devices is recommended to do as the final step during the installation. Please check the Power Supply Options section for the details. Mounting Options For the mounting of the devices Lightware supplies optional accessories for different usages. The device has two mounting holes with inner thread on the bottom side. Fasten the device by the screws enclosed to the accessory. Locking DC Plug Twist 90° clockwise to lock. Only HDMI-TPX-106 series extenders are built with locking DC input connector UD Mounting Plate F110 UD Mounting Plate F120 Minimum CAT Cable Requirement Lightware highly recommends using CAT6a AWG24 or higher category 10G Ethernet cables for the TPX (AVX) connection between the transmitter and the receiver. Usage of e.g. AWG28 Ethernet cables may reduce the extension distance significantly. UD Mounting Pro P140 The UD Mounting Plate F110 makes it easy to mount a single device on any flat surface, e.g. furniture. The UD Mounting Plate F120 and UD Mounting Pro P140 provide the same for one half-rack or two quarter-rack sized units. Pocket-sized devices can also be fastened to them. The UD Mounting Pro P140 makes easy and quick changing of the extenders under the desk available. To order mounting accessories, please contact sales@lightware.com. ¢ Using different (e.g. longer) screws may cause damage to the device. The extenders are quarter-rack sized. Firmware Upgrade Lightware Device Updater (LDU2) is an easy and comfortable way to keep your device up to date. Establish the connection via Gigabit Ethernet port. Download and install LDU2 software from the company's website, www.lightware.com, where you can find the latest firmware package as well.