Owner's Manual for SOLINTEG models including: Wi-FiLAN-2-in-1-Module, DuoCOM Wi-Fi LAN 2 In 1 Module, DuoCOM, Wi-Fi LAN 2 In 1 Module, 2 In 1 Module, Module
Tech - Solinteg
Reference and Design Consideration for PV Strings - Solinteg
Solinteg Inverter Configuration Guide Manual - Solinteg
File Info : application/pdf, 11 Pages, 6.10MB
DocumentDocumentDuoCOM Module Introduction Wi-Fi /LAN 2 in 1 www.solinteg.com 2023.7.27 Description ABOUT DUOCOM DuoCOM is a monitoring device that combines two ways of communication including Wi-Fi and LAN offering convenient configuration and reliable communication for the solar system. Our easy-to-use DuoCOM can enhance your Solinteg's inverter data monitoring, save your time on the configuration and enhance the reliability of tracking your installation's energy production. Wi-Fi/LAN 2 in 1 DuoCOM Key Parameters Wi-Fi 20M Communication distance LAN 100M Plug and Play USB 3.0 Installation 1Minute Data transmission interval Variable IP 65 Suitable for indoor & outdoor Modbus TCP Communication with server Modbus RTU -3075 Wide operation temperature Appearance Indicator Button Off Connection is abnormal. Slow Flash The dongle isn't connected to the router. Quick Flash The dongle is connected to the router but not connected to the server. On The dongle is working properly. Restart/Reset(configuration will be cleared) Press the button for less than 5s to restart the dongle. Press the button for more than 5s to reset the dongle. Highlights Reliability Integrate Wi-Fi and LAN two communication methods offering higher data transmission reliability Data Security Data encrypted to ensure your personal generation data security Easy to use Plug-and-play connectors for quick installation, and free of configuration save your time Multi-communication Support easy communication with 3rd party devices and platforms via Modbus TCP and Modbus RTU communication Wi-Fi/LAN Auto Detect LAN Ethernet cable No need configuration when router DHCP is enabled Wi-Fi Wireless Step1 Step2 Step3 Need simple configuration Wi-Fi/LAN Auto Switchover LAN If there's an ethernet cable inserted into the DuoCOM dongle, the inverter will use LAN communication which you don't need to do the configuration. 5MIN AUTO Wi-Fi If there's no ethernet cable inserted into the DuoCOM dongle, the inverter will use Wi-Fi communication which will take a few steps for the configuration. If a DuoCOM is configured and attached to the router through WiFi and LAN at the same time, the dongle will first use the LAN communication and will automatically switch to WiFi if the LAN communication fails for more than 5 minutes. Modbus TCP Application MODBUS/TCP is a simple derivative of the MODBUS family of communication protocols for managing and controlling automation equipment. MODBUS TCP uses TCP/IP and Ethernet to transmit MODBUS messages between sites, and the communication messages are encapsulated in Ethernet TCP/IP packets. There are two methods to realize the communication between the inverter to EMS device through Modbus TCP: 1. Direct connection 2. Indirect connection (transfer through the router) Method 1. Connect the DuoCOM to the EMS device directly EMS Device Method 2. Connect the DuoCOM to the EMS device through router Router EMS Device Why to Choose DuoCOM Reliable WiFi or LAN communication automatically switchover if one fails for 5 minutes Easy to install Everything will be done with just a plug and play Extendable Modbus TCP and RTU allow 3rd party EMS device connection for more possibilities Cost Saving No need to store two kinds of modules for meeting different customer demands Simple One dongle for all application scenarios, make everything simple THANK YOU www.solinteg.com