Contact Us | Better BathroomsBetter Bathrooms - Login
Home - Wirquin Ltd
User Manual for better bathrooms models including: V559 Wall Hung Toilet, V559, Wall Hung Toilet, Hung Toilet, Toilet
Santiago Wall Hung WC, Soft Close Seat, Wirquin Compact WC Frame and Chrome Flush Plate | Appliances Direct
Santiago Wall Hung WC, Soft Close Seat, Wirquin Compact WC Frame and Black Flush Plate | Appliances Direct
File Info : application/pdf, 40 Pages, 6.43MB
DocumentDocumentWall Hung Toilet
Toilet seat and Wall Frame/cistern sold separately · Waste pipe sold separately if a new installation
Please note: Image is for illustrative purposes only and may differ slightly to the actual product.
· Single-person assembly · Tools required · We always recommend using professional
tradespeople to install your product
V5 5.9.23
Congratulations on your purchase
And welcome to our growing gang of savvy shoppers We're on a mission to bring you extraordinary bathroom products, for less. From modern to traditional style ceramics, plus the gorgeous fixtures, fittings and furniture to match. So, you can fall in love with your space every single day.
As one of the UK's largest independent bathroom stores, we've received countless awards; including the National Business Awards UK, the Digital Entrepreneur Awards and being placed on The Sunday Times Fast Track 100. We hope your new product goes beyond and above your expectations. However, should any problems occur, please:
· Log in to your account and contact our customer services team via your self-serve portal betterbathrooms.com/CustomerAccount/Login
· Contact us via betterbathrooms.com/content/contact-us
Important information
· Please read these instructions thoroughly and retain for future reference. · Manufactured to BS EN997 WC pans and WC suites with integral trap. · All installation work must be carried out to comply with the Water Bylaw
Regulations. · The installation should be designed to allow access for maintenance. · This manual covers installation of the toilet pan only - wall frame/cistern and seat
are NOT supplied.
2
Contents
· Parts
4
· Tools required
4
· Installation
o Preparing for a Wall Hung Toilet Pan Fitting
5
o Wall Hung Toilet Pan Fitting
6-7
· Troubleshooting
8
· Maintenance
8
· Cleaning
8
3
Parts
Toilet Pan Fixing kit (below components) Please note not all the parts included are required for all installations, example top fixing pans do not require Part E A. Allen key B. 2 x Threaded connector (fixing bolts) C. 2 x Plastic wall mounting housing D. 2 x Grub screw E. 2 x Cover cap (Side fitting only) F. 1 x Tightening tool for Part C G. 2 x Clear plastic tubes H. 6 x Space washers
Tools required
· Allen key (supplied) · Silicone
4
Installation
Please note: Whenever possible and when safe to do so, it is recommended to carry out leak tests during the installation process. Preparing for a Wall Hung Toilet Pan Fitting A Flush pipe is supplied with the Wall Frame/cistern assembly, (Wall Frame/cistern sold separately). B Pan connector (waste pipe) supplied with Wall Frame/cistern assembly.
Please note: Pipes are not included. Once you have received your toilet pan, this will allow you to prepare and install the Wall Frame/cistern (both sold separately). To install the Wall Frame/cistern, please use the instruction guides supplied with them. This guide advises on installation of the wall hung toilet pan only.
5
Wall Hung Toilet Pan Fitting After the wall frame has been set in the wall and the wall has been finished, the installation of the toilet pan to the frame can begin.
1. Prepare the pipes as advised (cutting of the flush pipe and pan connector may be required).
2. The threaded bars should be exposed from the frame through the wall, as shown below.
3. It is advisable to apply a small amount of lubricant (washing up liquid) to the flush pipe and pan connector to assist with fitting the toilet pan.
4. Connect the flush pipe and pan connector to the frame ready for connection to the toilet pan as shown, then screw the female threaded connectors (fixing bolts) onto the threaded bars so that the cut out aligns with the fixing hole in the toilet pan.
6
5. Insert the plastic wall mounting housing into the holes in the rear of the toilet pan and align the hole with the fixing hole on the top face of the toilet pan.
Please note: this next section will require two people. 6. Push the toilet pan onto the wall frame ensuring that the flush pipe and pan connector fully engage with the toilet. (Image below shows the plastic housings fitted inside the toilet pan). 7. If the plastic housing Part C does not align with the hole in the pan, due to length, you will need to fit the plastic spacers Part H
Please note: The cut out on the connector and the hole in the housing should be aligned. Please note: On this version, the fixing hole is located on the top face, not in the side of the toilet pan.
8. Using the Allen key secure the grub screw into the plastic housing and into the cut out on the connector to secure the toilet pan onto the frame.
9. The clear plastic tube Part G, can be used to assist in the installation of the screw, insert the grub screw into the end of the tube and then insert the tube into the hole in the toilet and insert the screw into the plastic housing and tighten
7
10. Once the installation is completed, a flush and leak test should be carried out and once it has been commissioned, the toilet can be sealed around the edge to finish.
Troubleshooting
Flush volume into the pan, not sufficient 1. Adjust the flush volume level on the syphon. 2. Check that the syphon is opening correctly. 3. If none of these resolve the issue replace the syphon.
Water running into the pan continually after flushing 1. Establish if the water level in the cistern is reaching the overflow on the syphon, if it does reach the overflow adjust the inlet valve. 2. If this continues, replace the inlet valve. 3. If the water level does not reach the overflow on the syphon, remove the top section of the syphon and check the washer for damage. 4. If the washer is damaged then replace.
Maintenance
All of the maintenance measures resulting from troubleshooting above requires you to access the internals of the cistern tank and for the water supply to be turned off. Please refer to the instruction guide supplied with your cistern for further guidance.
Cleaning
To maintain the surface finish of your product, wipe clean after every use, using a clean damp cloth, a mild detergent mixture can be used. Do not use abrasive cleaning agents or materials which can strip and scratch the surface; the use of these agents or materials can invalidate your guarantee.
8
INITIO WALL HUNG WC FRAME
290820 A_05/2020
BS 1212-4 COMPLIANT
www.wirquin.co.uk
IMPORTANT INFORMATION PRIOR TO INSTALLATION OF THE WC FRAME
Read the instructions carefully. Ensure product contents are complete. Check the product for any signs of damage It is recommended that a technically competent installer undertakes installation. It is the installer's responsibility to carry out a thorough assessment of the installation environment (i.e. wall type/structure) and use appropriate fixings. Care should be taken when drilling to avoid any hidden wires or pipes. Use appropriate Personal Protective Equipment at all times when installing the product.
CLEANING Clean push plate with warm soapy water. Do not use any bleach or detergents.
320 - 415 mm 1082 - 1177 mm
833 - 928 mm
320 - 415 mm
0.8m Frame 2
1m Frame
COMPONENTS
Component Description
A
Inlet Valve
B
Flush Valve
C
90 ° WC Pan Connector
D
WC Pan Connector Bracket
F
Straight WC Pan Connector
G
Flushpipe
H
Flushpipe Bungs
I
Push Plate Clips
J
Push Plate Bracket
K
Push Plate Cable Connector
L
Chrome Push Plate
M
Wall Brackets
N
Wall & Floor Plugs
O
Wall & Floor Screws
P
Washers
Q
Nuts
R
Wall Fixing Threaded Bar
S
Pan Fixing Threaded Bar
T
Washers
U
Nuts
V
Pan Fixings Sleeve
W
Pan Fixing Cover Cap
X
Isolation Valve
Y
Isolation Valve Fibre Washers
For use during first fix
1
Cistern Cover
2
WC Pan Connector & Flushpipe Cover
3
Pan Fixing Threaded Bar Sleeve
0.8m Frame QTY 1 1 1 1 1 1 1 2 1 1 1 2 4 4 2 6 2 2 2 6 2 2 1 2
0.8m - QTY 1 2 2
1m Frame QTY 1 1 1 1 1 1 2 2 1 1 1 2 4 4 2 6 2 2 2 6 2 2 1 2
1m - QTY 1 2 2
3
COMPONENTS - 0.8M FRAME
X Y x2 A
B C D
M x2 N x2
R x2 O x2
P x2 Q x6
I x2 J
K
1
L H
G F
N x2 O x2
4
2
T x2 U x6 V x2
3 x2
S x2 W x2
COMPONENTS - 1M FRAME
A X Y x2
M x2 N x2
R x2 O x2
I x2
P x2 Q x6
J
K
1
L B
H x2
T x2 U x6 V x2
S x2 W x2
C
D F
G
2
N x2 O x2
3 x2
5
1 HEIGHT ADJUSTMENT
1000 mm
220 mm
2 2
1
1
3
3
6
2 WC PAN CONNECTOR INSTALLATION
C
Secure the pan connector into the bracket
7
3 WALL & FLOOR FIXINGS
M x2
R x2 O x4
N x4
Q x6
x2
P
2
MNOPQR
A
B
C
D
NO
1
8
60 mm
4 WATER FEED
X x1
Y x2
The water feed can be positioned either top, back or side
1
A flow restrictor is supplied and should only be fitted when the water supply is mains fed. Ensure all pipework is clear of debris before connecting the water supply.
OPTIONAL - FLOW RESTRICTOR
2
9
5 WC PAN FIXINGS
S x2 U x4
Define required wc pan centres (180mm or 230mm) by measuring the distance on the back of the pan.
1
1 1
2
2
L = l1 + l2 +20mm
Thickness l1 of wall
l2 Thickness of pan
WARNING
0.8m Frame maximum wall thickness (50mm)
10
1m Frame maximum wall thickness (60mm)
6 FIRST FIX
1
2
2
3 x2
1
2
1
click !
2
1
2
171 mm
131 mm
0.8m Frame 372.5 mm 1m Frame 621.5 mm
320 mm 220 mm
180mm/230mm
120 mm
Ø60mm
M12
Ø139 mm
11
7a FLUSHPIPE / WC PAN CONNECTOR INSTALLATION
F
G
G
H 0.8m Frame H 1m Frame
0.8m Frame 1m Frame
x1
x2
1 2 1 1m Frame
0.8m Frame 23 mm MIN
1
26 mm MAX
2
0.8m Frame
3
4
50 mm MIN 70 mm MAX
5
L'
L'
L
L
12
7b PAN INSTALLATION
T x2 U x2 V x2
W x2
0.8m Frame
1
1m Frame
1
TOP
DOWN
2
2
2
1
13
8 FINAL COMISSIONING
ATTENTION
Ensure the divertor is positioned to allow the discharged water a clear unobstructed passage into the cistern.
1
Check that the inlet valve shuts off on the water line indicated inside the cistern. If adjustment is needed, move the float up or down the notched stem as required until the inlet shuts off on the water line indicated.
2
Allow the cistern to fill and check thoroughly for leaks around the toilet, cistern, water inlet, flush pipe and waste connections.
Hold the inlet valve down to cause the cistern to internally overflow. Ensure that the overflow can discharge the incoming water. If necessary, reduce the incoming water flow by partially closing the isolation valve.
14
9 PUSH PLATE INSTALLATION
I x2
J
1
2
3
click !
click !
15
10 PUSH PLATE INSTALLATION
K
L
1 click !
2
3
click !
2
1
HELPLINE
Should you require any technical help in association with your Wirquin products, please call our customer service number 0333 222 44 88 with your query.
WARRANTY: 10 Years For more detail on warranty information, please visit our website: www.wirquin.co.uk
WIRQUIN Ltd | Warmsworth Halt Ind Est | Warmsworth | Doncaster | DN4 9LS
www.wirquin.co.uk
16