Foxeer Reaper Extreme VTX

Specifications

Size: 36*27.5*8mm
Connector: MMCX
Display: 3 LEDs
Weight: 13g
Power Output: 25mW/200mW/500mW/1.5W/2.5W
Input Voltage: 9~36V
Output Voltage: 5V
Channels: 40CH
Protocol: Tramp

LED Indicator Guide

LED	Description
Red	Power
Green	Channel
Blue	Band

Button Operation

Channel Select Mode: Short click the button to enter channel setup. The green light will flash, indicating channel selection. Use short presses to cycle through channels.

Band Select Mode: Press and hold the button for 3 seconds to enter band setup. The blue LED will flash, indicating band selection. Use short presses to cycle through bands.

Power Select Mode: Press and hold the button for 3 seconds to enter power setup. The red LED will be solid and flash, indicating power selection. Use short presses to cycle through power levels.

Frequency Table

Channel	CH1	CH2	CH3	CH4	CH5	CH6	CH7	CH8
Band A	5865	5845	5825	5805	5785	5765	5745	5725
Band B	5733	5752	5771	5790	5809	5828	5847	5866
Band E	5705	5685	5665	5645	5885	5905	5925	5945
Band F	5740	5760	5780	5800	5820	5840	5860	5880
Race Band	5658	5695	5732	5769	5806	5843	5880	5917

Power (mW)	PIT	25	200	500	1.5W	2.5W

* Black parts are locked by default.

Unlock Frequencies and Power Levels

Long press the "KEY" button until the Red LED (PWR) is constant on, then off, then on again. Release the button to unlock all frequencies and power levels. A flashed Red LED indicates the unlocked status, while a constant Red LED indicates the locked status.

PIT Mode On/Off

Double-click the "KEY" button to toggle PIT Mode. When the Red LED (PWR) is off, PIT mode is active. When the Red LED (PWR) is on, PIT mode is off. In PIT mode, the VTX outputs extremely low power.

Notes

If the TRAMP cable is connected, the button controls will not function. Frequency and power adjustments must be made via the controller. The controller will take over these settings.

	Foxeer Reaper Extreme VTX User Manual User manual for the Foxeer Reaper Extreme VTX, detailing specifications, button operations, frequency tables, and PIT mode.
	Foxeer Reaper Extreme VTX: User Manual and Specifications Detailed user manual for the Foxeer Reaper Extreme VTX, covering its specifications, LED indicators, button operations for channel, band, and power selection, frequency table, unlocking procedure, and PIT mode. Includes important notes on Tramp protocol integration.
	Reaper Extreme VTX: Specifications, Operation, and Frequency Guide Comprehensive guide to the Foxeer Reaper Extreme VTX, detailing its specifications, LED indicators, button operations for channel, band, and power selection, frequency tables, unlocking procedures, and PIT mode. Includes technical details for RC enthusiasts.
	Foxeer Reaper Extreme VTX: Specifications, Operation, and Frequency Table Detailed specifications, button operation guide, frequency table, and PIT mode information for the Foxeer Reaper Extreme VTX.
	Foxeer Reaper Extreme VTX Specifications and Operation Guide Detailed specifications, LED indicators, button operations, frequency tables, and unlock procedures for the Foxeer Reaper Extreme VTX.
	Foxeer Reaper Extreme VTX: Specifications, Operation, and Frequency Table Detailed guide for the Foxeer Reaper Extreme VTX, covering its specifications, button operations for channel, band, and power selection, PIT mode, and a comprehensive frequency table.
	Foxeer F722 V2 Flight Controller Wiring Diagram and Connection Guide Detailed wiring schematic and connection guide for the Foxeer F722 V2 Flight Controller, including normal and pass wiring configurations, and connections with DJI systems.
	FOXEER F722 V3 Flight Controller Wiring Diagram and Connections Detailed wiring schematic and connection guide for the FOXEER F722 V3 Flight Controller, illustrating connections for various components including ESCs, receivers, VTX, and DJI systems.