Best Video Lights | Lights for Video Studio | COLBOR
User Manual for COLBOR models including: CL100 Video Light, CL100, Video Light, Light
Colbor CL100 ab € 177,52 (2023) | Preisvergleich Geizhals Österreich
Colbor CL100 starting from £ 169.99 (2024) | Price Comparison Skinflint UK
File Info : application/pdf, 2 Pages, 741.20KB
DocumentDocumentCaring For Your COLBOR Product Keep corrosive chemicals, liquids and heat source away from the product to prevent mechanics damage. The product is not waterproof. Do not leave the product unattended while in use. Keep out of reach of children. Must remove the COB protective cover before use. Do not handle with wet hands. Do not touch hot COB surface. Please do not block the ventilation and do not look at the light directly when it is on. Do not attempt to disassemble or modify the product. Doing so voids warranty. Please have the product checked or repaired by authorized technicians if any malfunctions happened. Disconnect from the power supply when it is not in use. Malfunction may be caused by dropping, impact of external force. Failure to follow all the instructions may result in mechanics damage. Warranty does not apply to human errors. Product Instructions Bowens Mount Release Latch LED Display Screen Settings Button EFF Rate Option Button Adjustment Dial EFF Mode Button CCT Mode / Power Button Power Input Umbrella Lock Umbrella Input Light Base Lock Light Base Direction Adjusting Handle Operation Instructions 1. Connect the power cord with the power adapter, plug the connector of adapter into the fixture's Power Input 2. Plug it into an electricity supply 3. Long press the Power Button to turn on the light. Default Mode: CCT 4. Long press the Power Button to turn off the light. Status Icon Description CL100 Video Light User Manual Thank you for choosing COLBOR product. Please read this manual carefully before use and follow all instructions mentioned herein. SET RATE EFF CCT POWER APP Connection Status Icon After selecting wireless connection in Settings menu, the icon will be displayed dynamically. The icon is always on to indicate successful pairing with mobile APP. The icon disappears to indicate mobile APP pairing failure, or the product is unpaired. Fan Status Icon Smart Mode. The product will adjust the fan speed according to the internal detected temperature to ensure that it is in optimal working condition. Quiet Mode. The fan keeps running at low speed for minimum noise, and overheating protection will be activated if the product temperature is higher than the alarm value. Group Status Icon None grouping status. The product defaults to the factory status, and will not be affected by other groups. A stands for Group A. There are six groups (A~F). T stands for Tx. A stands for Group A. There are six groups (A~F). R stands for Rx. A stands for Group A. There are six groups (A~F). TR stands for TxRx. Repeater Status Icon If the icon is always on, it means that Repeater function is turned on, and if the icon disappears, it means the function is turned off. Product Overheated Alarm Icon If the icon flashes, it means that the internal temperature of the product is too high, and cooling measures need to be taken. If the icon disappears, it means that the operation is normal. CCT Mode (Short press CCT Mode Button to enter) Interface Introduction Brightness (0%-100%) Color Temperature (2700K-6500K) Brightness / Color Temperature Control: 1. Short press Adjustment Dial to switch between brightness and color temperature control. SET RATE EFF CCT POWER 2. Roll the Dial clockwise to increase value, and anticlockwise to decrease value. SET RATE EFF CCT POWER Rolling the Dial will enlarge the current setting parameter value, and it will automatically return to the main screen after 1.5 seconds of no operation EFF Mode (Short press EFF Mode Button to enter) Interface Introduction Special Effect Rate Brightness Color Temperature Special Effect Switch: Short press EFF Mode Button RATE: Lv.1 - Lv.5 DIM: 0%-100% Fire CCT: 2700K-6500K RATE: Lv.1 - Lv.5 DIM: 0%-100% CCT Chase CCT: LOCK RATE: Lv.1 - Lv.5 EFF DIM: 0%-100% Pulsing CCT: 2700K-6500K RATE: Lv.1 - Lv.5 DIM: 0%-100% TV CCT: LOCK RATE: Lv.1 - Lv.5 DIM: 0%-100% Faulty Bulb CCT: 2700K-6500K RATE: Lv.1 - Lv.5 DIM: 0%-100% Welding CCT: 2700K-6500K Strobe RATE: Lv.1 - Lv.5 DIM: 0%-100% CCT: 2700K-6500K RATE: Lv.1 - Lv.5 DIM: 0%-100% Lightning CCT: 2700K-6500K RATE: Lv.1 - Lv.5 DIM: 0%-100% Explosion CCT: 2700K-6500K SOS RATE: LOCK DIM: 0%-100% CCT: 2700K-6500K Brightness / Color Temperature Control: 1. Short press Adjustment Dial to switch between brightness or color temperature control. SET RATE EFF CCT POWER 2. Roll the Dial clockwise to increase value, and anticlockwise to decrease value. SET RATE EFF CCT POWER 3. Short press EFF Rate Option Button to choose effect rate. SET RATE EFF CCT POWER Settings 1. Short press Settings Button to control the following settings 2. Scroll down the list by rolling Adjustment Dial clockwise, or rolling anticlockwise to scroll up. 3. Short press the Dial to enter corresponding setting. BT FAN GROUP COMM. RP CURVE CURVE RESP. LANG. RESET SMART A RX ON LINEAR LINEAR SHARP EN Settings Options Wireless Connection RESET Fan Mode SMART/ QUIET (SMART--The product will detect the current internal temperature to adjust the fan speed by itself. QUIET--The fan will run at low speed. If the product temperature reaches the alarm value, it will start the power-off protection mechanism. ) Group NULL/ A/ B/ C/ D/ E/ F (NULL by default) Communication TX/ RX/ TXRX (TX by default) Repeater Curve Response Language ON/ OFF (OFF by default) LINEAR (L.CURVE, E.CURVE, S.CURVE will be available soon through upgrade.) SHARP / SMOOTH (SMOOTH by default) EN/ CN (EN by default) When Group function is on, if the product is operated after a period of time, it takes time to connect between products, so there will be millisecond delay. The effective distance of transmitter (TX), receiver (RX), transmitter & receiver (TXRX) is 10 meters. If the product is used at a distance greater than 10 meters, it is recommended to use the Repeater (RP) function. Repeater (RP) function can effectively increase the control distance, but it will affect the product response time. It is recommended to set only one product within 10 meters diameter to turn on the Repeater (RP) function, the more you turn on, the slower the response during group control. Specifications Color Rendering Index 97 Color Temperature Range 2700K-6500K Beam Angle 120° (With Standard Reflector 55° ) Illumination 2998Lux (at 3.28ft / 1m 6500K, None Reflector); 10123Lux (at 3.28ft / 1m 6500K, With Standard Reflector) Power 100W (Constant Power) Light Working Voltage DC 15-24V 6.32A Cooling Mode Active Connector GX16 3-Pin Connector Body Material ABS Light Dimension (mm) 202*116*117 (Light Base Not Included) Light Weight 1.1kg/39oz Operating Temperature -10-50 Package List CL100 Video Light x1 Standard Reflector (With Bowens Mount) x1 Packing Bag x1 User Manual x1 COB Protective Cover x1 Power Adapter x1 Power Cord x1 WARRANTY Warranty Period Thank you for purchasing COLBOR products. 1. Customers are entitled to free replacement or repair service in case of quality defect(s) found in the product under normal use within 30 days upon receipt of the product. 2. Original COLBOR products are entitled to 12-month limited warranty service. The warranty period begins on the date of purchase of brand new, unused products by the first end-user. Within the warranty period, if product defect or failure is attributable to material defection or technological problem, the defective product or defective part will be repaired or replaced without charge (service and materials fee). Warranty Exclusions and Limitations 1. Faults resulted from inappropriate use of a product without following its operation specification 2. Artificial damage, e.g. crash, squeeze, scratch, soaking, exposing to rain or damp 3. Modifications to a product by its user or a third party without prior written consent of COLBOR, e.g. replacement of element or circuit, label alteration 4. The code on product is inconsistent with that of warranty certificate, or the code on the product or warranty certificate is altered or torn off 5. All consumable accessory attached to a product, like cable, cover 6. Faults as a result of force majeure, such as fire, flood, lightning, etc. Warranty Claim Procedure 1. If failure or any problem occurs to your product after purchase, please contact a local agent for assistance, or you can always contact COLBOR's customer service through email. 2. Please retain your sales receipt and warranty certificate as proof of purchase. If any of these documents is missing, only sales return or chargeable service will be provided. 3. If the COLBOR product is out of the warranty coverage, the service and the parts cost will be charged. Guangzhou Zhiying Technology Co., Ltd Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000 support@colborlight.com www.colborlight.com WARRANTY CERTIFICATE Please register your warranty. Meanwhile, you are welcomed to contact us via Email. USER INFORMATION SALES INFORMATION REPAIR RECORD Customer Name: Phone Number: Email: Address: Sales Date: Model: Product Code: Dealer: Service Date: Technician: Issue: RESULT Solved Unsolved Returned(Replaced)