UGREEN Bluetooth 5.1 Audio Adapter

Product Overview

This document provides instructions for the UGREEN Bluetooth 5.1 Receiver Audio Adapter.

Product Name: Bluetooth Audio Receiver

Model: CM106

Contents

• Product Overview
• Specifications
• Connect to the First Phone
• Connect to the Second Phone
• Factory Reset
• FCC Statement

Specifications

The document includes a table of specifications, but the details are not fully legible in the provided image for transcription.

Connection Instructions

The manual illustrates connection steps using diagrams. These steps are described textually below:

Connect to the First Phone

Step 1: Press and hold the power button for 3 seconds to turn on the device. The indicator light will flash blue and red alternately.

Step 2: Turn on the Bluetooth function on your phone and search for the device name 'UGREEN-CM106'.

Step 3: Select 'UGREEN-CM106' to connect. Once connected, the indicator light will flash blue slowly.

Connect to the Second Phone

Step 1: Press and hold the power button for 3 seconds to turn on the device. The indicator light will flash blue and red alternately.

Step 2: Turn on the Bluetooth function on your second phone and search for the device name 'UGREEN-CM106'.

Step 3: Select 'UGREEN-CM106' to connect. Once connected, the indicator light will flash blue slowly.

Note: The device supports connecting to two phones simultaneously.

Factory Reset

Step 1: Press and hold the power button for 8 seconds until the indicator light flashes red quickly.

Step 2: Release the button. The device has been reset to factory settings.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Compliance and Material Information

Compliance: All finished products and accessories comply with EU Packaging Directive 94/62/EC, US TPCH, and EU REACH.

Ink Requirements: Printing ink (finished product) must have a mineral oil content of MOSH (C15-C36) less than 0.1%; MOAH (1-7 aromatic rings) less than 0.1%; MOAH (3-7 aromatic rings) less than 0.0001%.

Revision History