User Manual for Wildix models including: V65 Fanvil Business Phone, V65, Fanvil Business Phone, Business Phone, Phone
Wildix EE OU FORCEPRO 2AI49-FORCEPRO 2AI49FORCEPRO forcepro
File Info : application/pdf, 5 Pages, 3.22MB
DocumentDocumentV10 ForcePro Quick Installation Guide Packaging list Handset Cord Ethernet Cable Quick Installation Guide IP Phone Screen icon In hands-free mode In headset mode In handset mode Mute activated Silent mode Call is on hold Auto-answering activated Keys features Handset Stand Power Adapter (Optional) Wall Stand (Buy separately) Call forward activated Disable do not disturb (Beige) Do not disturb activated (Red) SIP hotspot activated VLAN activated VPN activated Bluetooth device paired connection New SMS Dialed call(s) New VM messages Internet connected Voice quality level of call X Internet is disconnected Keypad locked ! No IP address Forward call(s) Wireless network connected Missed call(s) Wireless network disconnected Received call(s) Wireless network failure Home key, go back to Homepage Headset key, activate/deactivate headset DSS Keys, It can be set as line key/function key/speed dial key, etc. Soft keys Message waiting indicator Left and right navigation keys Up navigation key, Shortcut to call log Down navigation key, Shortcut to Status OK key, Shortcut to Menu Return key, go back to the previous directory Phonebook key Voice message key In idle mode: activate/deactivate silent mode In communication mode: mute/un-mute a call Redial key, access to redial the last record Hand-free key, activate/ deactivate hands free In idle mode or during ringing: increase or decrease ringer volume In communication: increase or decrease handset, headset or hands-free volume - 2 - Installation the device Please follow the instructions in below picture to install the device. Attach the stand and adjust the angle of the screen PUSH Wall mounting (wall stand need buy separately) Connecting to the device Please connect power adapter, network, PC, handset, and headset to the corresponding ports as described in below picture. USB port: connect USB device (USB flash drive). Power port: connect the power adapter. Network port: connecting local area network or internet. PC port: the network port connect to the computer. Headset port: connect headset. Handset port: connect IP Phone handset. USB Internet PC Headset Handset 5V Network connect Using Ethernet 1. The power on the device and connect the WAN port of the phone to the RJ45 socket of a hub/switch or a router (LAN side of the router) using the Ethernet cable. 2. The default is DHCP mode. Using WiFi 1. The power on the device and make sure the phone is idle. 2. Press Menu > Basic > WLAN, Enabled the WiFi Feature. 3. Press scan to search for currently available wireless network. 4. Enter the available network and select the WiFi you want to connect. 5. Press connect soft key and enter the appropriate password to connect to the WiFi. The default is DHCP mode. Configuration Configuration via LCD menu of phone 1. Press Menu > Advanced (default password 123) 2. Select Network: To configure the Network Settings (IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE). 3. Select Accounts: To configure enable the account, fill the SIP server address, port, user name, password etc. 4. Save the configuration. Configuration via web 1. Get the IP address from the phone: Press down navigation key, or Menu > Status > IPv4 / IPv6. 2. Login: Input the IP address in the web browser. The PC and phone should be in the same IP address segment (The default username and password are both `admin'.) 3. Configure: Select network/account etc, and fill the relevant content. 4. Save the configuration. Language setting 1. Press Menu key > Basic > Language. 2. Select the desired language and press OK soft key. Making a call 1. Pre-dialing: enter the phone number and pick up the handset. 2. Direct dialing: lift the handset and enter the phone number. 3. Handsfree: enter phone number and press or vice versa. 4. Headset: enter phone number and press or vice versa. 5. Designated line: press line key, enter phone number and press dial key. Accepting a call 1. Using the handset: pick up the handset. 2. Using the headset: press . 3. Using the handsfree: press . - 3 - Redial 1. Press key, redial a call number. Call Mute 1. Press to Mute the microphone during the call. 2. Press again to un-mute the conversation. Putting a call on hold 1. Press Hold soft key, caller is put on hold. 2. To retrieve the call press Resume soft key. 3. Note: with more than one active call, select desired call with the navigator key and use the corresponding soft key to hold or resume. Call transfer Attended transfer: 1. Press Xfer soft key during the active conversation, the call is put on hold. 2. Dial the second telephone number. 3. When the call is answered, then press Xfer soft key to complete the operation. Blind transfer: 1. Press Xfer soft key during the active conversation, the call will be on hold. 2. Then enter the 2nd telephone number and press Xfer soft key. Call forward 1. Press Menu > Features > Call Forward. 2. Select the line, the type of forward, enter the destination number and status, and press OK soft key. Call conference 1. Once in line with 1st caller, press Conf soft key, 1st caller is put on hold. 2. Then call the 2nd number. 3. After, 2nd call is established, press Conf soft key to set up the conference. Programmable keys 1. You can configure shortcuts for the programmable keys. 2. Press Menu > Basic > Keyboard, select among the configurable items, and select your desired type and value, press OK key. Do not disturb 1. Press DND soft key, and enable the device do not disturb mode. 2. Or press Menu > Features > DND, and select the Mode and Type, and press OK key. Voice mail 1. To access your voice mailbox, press or Menu > Message > Voice Message, number of messages will be indicated if provided by your server or pbx. 2. Select the line and press Play to call. Bluetooth 1. Press Menu > Basic > Bluetooth. 2. Press OK soft key to enter the bluetooth open interface. After opening, press Scan soft key to display the list of bluetooth scanned. Select any device and press connect. WiFi 1. Press Menu > Basic > WLAN. 2. Press OK soft key to enter the WLAN open interface. After opening, press Scan soft key to display the list of Wi-Fi scanned. 3. Press Enter soft key to enter the available Network, select the wireless network, press the Connect soft key and enter the password to connect. Call list 1. Press up navigator key or Menu > CallLog > Local Call Logs. 2. Scroll through the list using navigator key. 3. To dial an entry, press Dial soft key or pickup handset or press or . Phonebook Access Phonebook: 1. Press or Contact soft key or Menu > PhoneBook > Local Contacts. 2. Select All Contacts or other group. 3. To dial an entry, press Dial soft key or pickup handset or press or . Add new entry: 1. Press Contact soft key, Press All Contacts or other group > Press Add. 2. Enter name and number and press OK soft key. - 4 - Regulatory Compliance Federal Communication Commission (FCC) -- USA This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: K1KIPNANFORCEPRO If requested, this number must be provided to the telephone company. Industry Canada Equipment Standard for Digital Equip-ment (ICES) -- Canada This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. Innovation, Science and Economic Development (ISED) -- Canada This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. L'émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d'Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) L'appareil ne doit pas produire de brouillage; (2) L'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. Cet équipement est conforme aux limites d'exposition aux rayonnements ISED établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20cm de distance entre la source de rayonnement et votre corps This device and it's antennas(s) must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with IC multi-transmitter product procedures. Cet appareil et son antenne (s) ne doit pas être co-localisés ou fonctionnement en association avec une autre antenne ou transmetteur. This product meets the applicable Innovation, Science and Economic Development Canada technical specifications. Le présent produit est conforme aux spécifications techniques applicables d'Innovation, Sciences et Développement économique Canada. - 5 -Adobe PDF library 10.01 Adobe Illustrator(R) 15.0