DVD10
Digital Versatile Disc Player
Dolby Digital / DTS
PRELIMINARY
Service - Technical Manual
Harman International SNC – Harman Consumer International 2, route de Tours 72500 Château du Loir FRANCE
Features
General Features
- Completely new dimension in video entertainment.
- Subtitles may be displayed in one of a maximum of 32 languages*.
- Multi-angle function allows viewing different angles of scenes (limited to DVDs recorded with multiple camera angles).
- Advanced sophisticated 10-bit MPEG-2 video decoding circuits.
- Direct RGB output via SCART for optimum video performance.
- Second SCART connector for throughput of VCR or other video source to TVs with only one SCART input.
- Dual-layer compatibility for extended play DVD.
- * The number of languages recorded depends on the software.
Compatibility
- Compatible with CD as well as DVD.
- The DVD10 plays conventional Audio CDs or erasable CDs (CD-RW), bearing the logos as shown below, as well as any DVD with region code 0 or 2.
Disc Formats Supported
The unit can play discs bearing any of the following marks:
DVD (3" or 8 cm disc, 5" or 12 cm disc)
CD (3" or 8 cm disc, 5" or 12 cm disc)
CD-RW (5" or 12 cm disc)
High Quality Digital Audio
- Connect a DTS (Digital Theater Systems) or Dolby Digital decoder for high quality 5.1 digital surround sound from DTS or Dolby Digital discs.
- Linear PCM audio at 16-24 bits and 44-96 kHz (not on digital output) offers audio quality exceeding CD.
Many Convenient Features
- On-Screen Menu Icons for disc information or player information and access to major functions.
- Programming of up to 9 scenes in memory (markers).
- Parental lock settings to prevent play of discs unsuitable for some audiences (DVD only).
- Intuitive menu operating system.
- Separate Buttons for convenient Fast Forward/Fast Reverse Search and Track Skip.
Accessories
Included
- Remote control unit
- Batteries for remote control unit (size "AA")
- Video/Audio Cable
Optional
- S-Video Cable
- Optical Digital Audio Cable
- Coaxial Digital Audio Cable
Declaration of Conformity
We, Harman Consumer International, 2, route de Tours, 72500 Château-du-Loir, FRANCE, declare in own responsibility, that the product described in this owner's manual is in compliance with technical standards:
- EN 60 065:1993
- EN 55 013/A12/8.1994
- EN 55 020/12.1994
- EN 61000-3-2/4.1995
- EN 61000-3-3/1.1995
Carsten Olesen, Harman Kardon Europe, 01/01
Specifications
Applicable Disc: | 5 inch (12 cm) or 3 inch (8 cm) DVD-Movie, CD or CD-RW discs, Region 2 DVD-Movie Discs, DVD: Single Side/Single Layer, Single Side/Dual Layer, Dual Side, Dual Layer, Linear PCM, Dolby Digital or DTS Audio Discs |
Video Signal System: | PAL/NTSC |
Composite Video Output: | 1 V p-p/75 Ohms, sync negative polarity |
S Video Output: | Y/Luminance: 1 V p-p/75 Ohms, sync negative polarity; C/Chrominance: 0.286 V p-p |
Component Video Outputs: | Y: 1 V p-p/75 Ohms, sync, negative polarity; Pr: 0.648 V p-p/75 Ohms; Pb: 0.648 V p-p/75 Ohms |
Analog Audio Output: | 2 Vrms max. |
Frequency Response: | DVD (Linear PCM): 2 Hz - 22 kHz +0/-0.5 dB (48 kHz sampling); 2 Hz - 44 kHz +0/-0.5 dB (96 kHz sampling); CD: 2 Hz - 20 kHz +0/-0.5 dB |
Signal/Noise Ratio (SNR): | 110 dB (A-weighted) |
Dynamic Range: | DVD: 100 dB (18 Bit); CD: 91 dB |
THD: | DVD/CD: 0.0025% |
Wow & Flutter: | Below Measurable Limits |
AC Power: | 220-240 V/50 Hz |
Power Consumption: | 20 Watts (On) |
Dimensions (WxHxD): | 440x108x330 mm |
Weight: | 7 Kg |
All specifications subject to change without notice.
Harman Kardon and Power for the digital revolution are trademarks of Harman Kardon, Inc. Manufactured under license from Dolby Laboratories. Dolby, AC-3, ProLogic and the double-D symbol are trademarks of Dolby Laboratories. Unpublished Work. © 1992-1997 Dolby Laboratories, Inc. All rights reserved. DTS is a trade mark of Digital Theater Systems, Inc.
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Technical Diagrams
DVD10 Block Diagram
This diagram illustrates the main functional blocks of the DVD10 player, including power supply (SMPS), front panel interface (F/E & MECHA), main processing unit (CPU), MPEG decoder, memory (FLASH, SDRAM, DRAM), DAC, and audio/video output stages. It shows the interconnections between these components.
DVD 10 Wiring Diagram
This diagram shows the overall wiring connections between the major boards of the DVD10, including the Power Supply (SMPS), Front Board, Mecha F/E Board, Main Board, and Output Board, as well as the SCART Board. It details power and signal routing.
DVD 10 MPEG Schematic Diagram
This schematic details the MPEG decoding section, focusing on the ST15505 MPEG IC and its connections to memory (SDRAM, DRAM), flash memory, and other support components for video processing.
DVD 10 Video Schematic Diagram
This schematic illustrates the video output circuitry, including encoding and output stages for CVBS, S-Video, and component video signals, managed by ICs like TSH95.
DVD 10 Front Board Schematic Diagram
This schematic covers the front panel components, including the VFD display, buttons, remote sensor, and their interface with the main CPU (CXP82324) and other front-end circuitry.
DVD 10 Memory Schematic Diagram
This schematic details the memory system, including Flash memory, SDRAM, and DRAM, showing their connections to the main processor for data storage and retrieval.
DVD 10 Miscellaneous Schematic Diagram
This schematic covers various auxiliary circuits, including JTAG test connections, power indicators, and interface components.
DVD 10 Rear Schematic Diagram
This schematic details the rear panel connectors and associated circuitry, including audio and video outputs.
DVD 10 SCART Schematic Diagram
This schematic focuses on the SCART connector and its associated signal routing for video and audio.
DVD10 Power Supply Schematic Diagram
This diagram provides a block overview of the power supply unit, showing input filtering, rectification, switching control, and various regulated voltage outputs.
Power Supply Schematic
This detailed schematic shows the components and circuit design of the power supply unit, including transformers, rectifiers, filters, regulators, and protection circuitry.
IC1: Power Switching and F.E.T. (KA1H0280RB)
This section provides details on the KA1H0280RB, a Power Switching and FET component used in the power supply, including its features, ordering information, and block diagram.
Component Lists
The document includes extensive lists of components used in the DVD10, categorized by board (Output, Power Supply, Main, Front) and specific integrated circuits (ICs). These lists provide part numbers, drawing numbers, and descriptions for various electronic components such as ICs, transistors, resistors, capacitors, connectors, and other hardware. Examples include:
- Integrated Circuits (ICs): ST15505, CXP82324, PCM1716E, KA7808, etc.
- Connectors and Cables: SCART, RCA, FPC, etc.
- Passive Components: Resistors (e.g., RMGCFMIN, CCCFMIN), Capacitors (e.g., CE, PSU capacitors), Coils, Beads.
- Other Components: Crystals, Sensors, Switches, LEDs.
The lists also contain part numbers and descriptions for various assemblies like PCBs (Printed Circuit Boards) for different sections of the player.