MAUL LED Flashlight - User Manual
About the MAUL LED Flashlight
This document provides instructions for the MAUL LED flashlight, model number 8186809.150B.
Battery Installation
To install batteries:
- Unscrew the rear cap of the flashlight.
- Insert three (3) AAA batteries, observing the correct polarity (+ and - ends).
- Screw the rear cap back on securely.
Diagram Description: The diagram shows the flashlight body, the rear cap being unscrewed, and three AAA batteries with their positive and negative terminals clearly marked.
Operating the Flashlight
Turning On/Off
The flashlight is operated via the side button:
- ON/OFF: A single, short press of the button turns the flashlight on or off.
- Mode Selection: A longer, sustained press (hard push) cycles through the different light modes.
Diagram Description: The diagram illustrates the button with 'soft push' indicated for ON/OFF and 'hard push' indicated for mode changes. It shows the flashlight emitting light when ON.
Light Modes
The flashlight features three distinct light modes:
- Mode 1: Full brightness beam. Activated by a hard push from OFF or another mode.
- Mode 2: Dimmer beam. Activated by a subsequent hard push.
- Mode 3: Flashing/Strobe mode. Activated by a third subsequent hard push.
Diagram Description: Diagrams 2a, 2b, and 2c show the flashlight in different states: Mode 1 with a bright, focused beam; Mode 2 with a less intense beam; and Mode 3 with a rapidly flashing beam.
Focus Adjustment
The beam focus can be adjusted by sliding the front section of the flashlight forward or backward.
Diagram Description: Diagram 3 shows a hand sliding the front bezel of the flashlight, indicating adjustment of the beam's spread or focus.
Packaging and Disposal
Information regarding packaging and disposal is provided in multiple languages:
- English: Notice regarding packaging and disposal.
- French: Notice de conditionnement et d'élimination
- Italian: Istruzioni di imballaggio e smaltimento
- Bulgarian: Опаковка и указание за изхвърляне
Please follow local regulations for proper disposal of electronic devices and batteries. The product is marked with recycling symbols.
Diagram Description: The diagrams show a recycling symbol (♻️) indicating that the product should be recycled, and a crossed-out waste bin symbol (?️) indicating it should not be disposed of with general household waste.