User Manual for VEVOR models including: XC2116, XC2117, XC2116 XC2117 Auto Rocker Panels, XC2116 XC2117, Auto Rocker Panels, Rocker Panels, Panels

司顺工业设计

PDF preview unavailable. Download the PDF instead.

安徽迅驰-汽车摇臂板说明书20250317 1743310801573
AUTO ROCKER PANELS
MODEL:XC2116/XC2117

MODEL:XC2116/XC2117

AUTO ROCKER PANELS

<Picture Only For Reference >
This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won't inform you again if there are any technology or software updates on our product.
-1-

IMPORTANT SAFEGUARDS
WARNING: Read and understand this entire manual before operating or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property. PRIOR TO INSTALLATION
A) It is only approved to install the Auto Rocker Panels according to these written instructions with the hardware provided.
WARNING Failure to install according to these instructions will invalidate the warranty. This includes, but is not limited to use alternative installation methods, hardware, or materials. DO NOT USE: Loctite Super Glue or similar products on the hardware or the flares. NOTE: Ambient temperature and part temperature must be at least 60(16) for proper tape adhesion.
B) Fit: Verify the fit of the Trail Armor to the vehicle. (Some filing, sanding, or cutting may be necessary to ensure proper fit).
C) Painting: (Optional) If the paint is desired it must be done prior to installing Trail Armor on the vehicle. Clean outer surface with a good grade degreaser. DO NOT USE LACQUER THINNER OR ENAMEL REDUCER AS A DEGREASER. Wipe the outer surface thoroughly with a tack rag prior to paint. Application of plastic adhesion promoter for ABS plastic as per your paint system manufacturer's recommendations is required. Paint Trail Armor using a high-quality enamel, or polyurethane automotive paint. If painting edge trim (not recommended), use a flex additive.
SAVE THESE INSTRUCTIONS
-2-

PACKAGE LIST
 Rear Side Panel*2 Front Side Panel*2 Tape *1,  ALCOHOL PREP PAD*8,  Manual *1;

Model Material
Applicable vehicle

XC2116
Plastic
Chevrolet Silverado
extended cab version 1999-2006

XC2117
Plastic
Chevrolet Silverado 1500
extended cab edition 2014-2018

TOOLS FOR EASY INSTALLATION:
· Cleaning Cloth 1. Open vehicle doors. Use alcohol wipes to clean all dirt and debris from vehicle door sills and rocker panels.
2. Rear Side Panel Installation Procedure (Driver's Side):

Extended Cab Rear Toward Rear of Vehicle Toward Front of Vehicle
Underside of Sill Plate -3-

2.1 Peel back roughly 3in of red tape liner from the pieces of tape on the back side of rear part. Make sure the red tape liner will be accessible when the part is attached to the truck. Note that there is a strip of tape under the sill plate. 2.2 Set part in place on the vehicle. 2.3 Remove all red tape liners. Do not forget the tape liners on the bottom of the part.
2.4 Apply firm pressure to mounting locations to affix to the truck. 3. Front Side Panel Installation Procedure (Driver's Side):
Underside of Sill Plate -4-

Toward Rear of Vehicle Toward Front of Vehicle
Underside of Sill Plate
3.1 Peel back roughly 3in of red tape liner from the pieces of tape on the back side of rear part. Make sure the red tape liner will be accessible when the part is attached to the truck. Note that there is a strip of tape under the sill plate. 3.2 Set part in place on vehicle. 3.3 Remove all red tape liners. Do not forget the tape liners on the bottom of the part.
Note:The pictures in this paper are for reference, and the appearance is subject to the actual received products.
-5-

Manufacturer: Shanghaimuxinmuyeyouxiangongsi Address: Shuangchenglu 803nong11hao1602A-1609shi, baoshanqu, shanghai 200000 CN. Imported to AUS: SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia Imported to USA: Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
YH CONSULTING LIMITED.
UK REP C/O YH Consulting Limited Office 147, Centurion House, London Road, Staines-upon-Thames, Surrey, TW18 4AX E-CrossStu GmbH
EC REP Mainzer Landstr.69, 60329 Frankfurt am Main.
-6-


WPS 文字