Xiaomi Redmi Note 12 Pro 5G Quick Start Guide
Model: 22101316G
Introduction
Thank you for choosing the Redmi Note 12 Pro 5G.
This guide provides essential information for setting up and safely using your device.
Getting Started
To turn on the device, long-press the power button.
Follow the on-screen instructions to configure your device.
Device Overview
The device features:
- Volume Buttons
- Power Button
- USB Type-C Port
- Nano-SIM slot
MIUI
Your Redmi Note 12 Pro 5G comes pre-installed with MIUI, Xiaomi's customized Android-based OS. It offers frequent updates and user-friendly features based on global user feedback.
For more information, visit: en.miui.com
SIM Card
Please do not insert non-standard SIM cards into the SIM card slot, as they may cause damage.
WARNING: Do not disassemble this device.
WEEE (Waste Electrical and Electronic Equipment)
Special precautions are required for the safe disposal of this product. This marking indicates it should not be discarded with household waste in the EU. To prevent environmental or health harm and promote sustainable resource reuse, please recycle responsibly.
Use designated return and collection systems or contact your retailer for recycling.
View Environmental Declaration: www.mi.com/en/about/environment
Important Safety Information
General Cautions
- Risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to instructions.
- To prevent hearing damage, do not listen at high volume levels for extended periods.
- Additional safety information is available at: www.mi.com/en/certification
Device Usage Precautions
- Using unauthorized accessories (cables, adapters, batteries) can cause fire, explosion, electric shock, or damage the device.
- Operating temperature range: 0°C to 40°C. Using the device outside this range may cause damage.
- Do not attempt to replace the built-in battery yourself.
- Charge only with the included or authorized cable and power adapter.
- Disconnect the adapter after charging is complete. Do not charge for more than 12 hours.
- Recycle or dispose of the battery separately from household waste. Mishandling can cause fire or explosion.
- Do not disassemble, hit, crush, or burn the battery. Stop use if deformed or damaged.
- Do not short-circuit the battery (risk of overheating, burns, injury).
- Do not place the battery in high-temperature environments (risk of explosion).
- Do not disassemble, hit, or crush the battery (risk of leakage, overheating, explosion).
- Do not burn the battery (risk of fire, explosion).
- Battery removal or repair must be done by an authorized repair center.
- Keep the device dry.
- Do not attempt self-repair; contact customer support or an authorized center.
- Connect compatible devices only, following their manuals.
- Ensure AC/DC adapter socket-outlets are accessible.
Safety Precautions
- Observe all applicable laws and rules for mobile phone use in specific situations and environments.
- Do not use the phone in potentially explosive environments (e.g., fueling areas, areas with flammable chemicals or dust). Obey signs to turn off wireless devices.
- Do not use the phone in hospital operating rooms, emergency rooms, or intensive care units. Comply with hospital rules. Consult your doctor and device manufacturer if you have a medical device. Maintain at least 15 cm distance from pacemakers. Avoid using near hearing aids or cochlear implants.
- Observe aircraft safety regulations and turn off the phone on board aircraft when required.
- Use the phone in accordance with traffic laws while driving.
- Do not use the phone outdoors during thunderstorms to avoid lightning strikes.
- Do not make calls while charging.
- Avoid using the phone in high humidity areas (e.g., bathrooms) to prevent electric shock, injury, or fire.
Security Statement
Update your phone's operating system using the built-in feature or visit authorized service outlets. Updating via other means may cause damage, data loss, or security issues.
EU Regulations
RED Declaration of Conformity
Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi (Model: 22101316G) complies with the essential requirements of the RE Directive 2014/53/EU.
Full EU declaration of conformity available at: www.mi.com/en/certification
[CE certification mark]
RF Exposure Information (SAR)
This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk: limit 2.0W/kg) as specified by Council Recommendation 1999/519/EC, ICNIRP Guidelines, and RED (Directive 2014/53/EU).
During SAR testing, the device transmitted at its highest certified power level and was positioned to simulate RF exposure against the head (no separation) and near the body (5 mm separation).
SAR compliance for body operation is based on a 5 mm separation distance. The device should be carried at least 5 mm away from the body. For body-worn use, use a non-metallic belt clip or holster maintaining at least 5 mm separation. Avoid accessories containing metal.
Certification Information (Highest SAR)
- SAR 10 g limit: 2.0 W/Kg
- SAR Value: Head: 0.99 W/Kg, Body: 0.99 W/Kg (5 mm distance)
Legal Information
This device may be operated in all EU member states.
Observe national and local regulations.
Restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in: AT,BE,BG,HR,CY,CZ,DK,EE,FI,FR,DE,EL,HU,IE,IT,LV,LT,LU,MT,NL,PL,PT,RO,SK,SI,ES,SE,UK(NI),IS,LI,NO,CH,TR.
Restricted to indoor use only when operating in the 5150 to 5350 MHz in Hong Kong.
2.4 GHz band restrictions: Norway: Not applicable within 20 km of Ny-Ålesund.
Frequency Bands and Power
This mobile phone offers the following frequency bands in EU and UK only, with maximum radio-frequency power:
- GSM 900: 35.5 dBm
- GSM 1800: 32.5 dBm
- WCDMA band 1/8: 25.7 dBm
- LTE band 1/3/7/8/20/28/38/40/41: 25.7 dBm
- 5G NR band n1/n3/n7/n8/n20/n28/n38/n40/n41: 26 dBm
- 5G NR band n77/n78: 29 dBm
- Bluetooth: 20 dBm
- Wi-Fi 2.4 GHz band: 20 dBm
- Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to 5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
- NFC: 13.56 MHz < 42 dBuA/m at 10m
5G connection depends on country, carrier, and user environment.
FCC Regulations
This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received, including interference that may cause undesired operation.
This phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to instructions, it may cause harmful interference to radio communications. However, interference is not guaranteed in all installations. If interference occurs, users are encouraged to correct it by:
- Reorienting or relocating the receiving antenna.
- Increasing the separation between the equipment and receiver.
- Connecting the equipment to an outlet on a different circuit from the receiver.
- Consulting the dealer or an experienced radio/TV technician.
RF Exposure Information (SAR)
This device meets government requirements for radio wave exposure. It is designed and manufactured not to exceed emission limits for radio frequency (RF) energy. The standard uses Specific Absorption Rate (SAR) as the unit of measurement.
The FCC SAR limit is 1.6 W/Kg. For body-worn operation, this device has been tested and meets FCC RF exposure guidelines for use with a non-metallic accessory, keeping the device at least 1.5 cm from the body. Compliance with metal accessories is not tested or certified and should be avoided. Any body-worn accessory must maintain at least 1.5 cm separation from the body.
FCC Note
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Shielded cables must be used to ensure compliance with Class B FCC limits.
UK Regulations
Declaration of Conformity
Xiaomi Communications Co., Ltd. declares that this GSM / GPRS / EDGE / UMTS / LTE / 5G NR Digital Mobile Phone with Bluetooth and Wi-Fi (Model: 22101316G) complies with the essential requirements and other relevant provisions of the UK Radio Equipment Regulations 2017 (SI 2017/1206).
Full UK declaration of conformity available at: www.mi.com/en/certification
RF Exposure Information (SAR)
This device complies with Specific Absorption Rate (SAR) limits for general population/uncontrolled exposure (Localized 10-gram SAR for head and trunk: limit 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP Guidelines, and UK Radio Equipment Regulations 2017 (SI 2017/1206).
During SAR testing, the device transmitted at its highest certified power level and was positioned to simulate RF exposure against the head (no separation) and near the body (5 mm separation).
SAR compliance for body operation is based on a 5 mm separation distance. The device should be carried at least 5 mm away from the body. For body-worn use, use a non-metallic belt clip or holster maintaining at least 5 mm separation. Avoid accessories containing metal.
Certification Information (Highest SAR)
- SAR 10 g limit: 2.0 W/Kg
- SAR Value: Head: 0.99 W/Kg, Body: 0.99 W/Kg (5 mm distance)
Legal Information
Observe national and local regulations.
Restricted to indoor use only when operating in the 5250 to 5350 MHz frequency range in the UK.
Restricted to indoor use only when operating in the 5150 to 5350 MHz in Hong Kong.
E-label
Access electronic certification information via Settings > About phone > Certification, or search "Certification" in Settings.
Model: 22101316G (2210 indicates launch after October 2022).
Disclaimer
This user guide is published by Xiaomi or its local affiliated company. Xiaomi may make improvements and changes to this guide at any time without notice. New online editions will incorporate these changes. All illustrations are for illustrative purposes only and may not accurately depict the actual device.
For the latest information, visit: www.mi.com/global/service/userguide
Adapter Information
Adapter Model: MDY-12-EG
More adapter information available at: www.mi.com/global/service/userguide
Manufacturer Information
Manufacturer's Authorized UK Representative:
Name: Xiaomi Technology UK Limited
Address: Part Ground Floor, North Wing, 100 Brook Drive, Green Park, Reading
Manufacturer: Xiaomi Communications Co., Ltd.
Manufacturer Postal Address: #019, 9th Floor, Building 6, 33 Xi'erqi Middle Road, Haidian District, Beijing, China, 100085
Brand: Redmi
Model: 22101316G
© Xiaomi Inc. All rights reserved.
Tehnoteka Disclaimer
This document was originally produced and published by the manufacturer, brand Xiaomi, and retrieved from their official website. Tehnoteka states that it does not assume responsibility for the accuracy, completeness, or reliability of the information, data, opinions, advice, or statements contained herein.
Tehnoteka has no authorization to make any changes or additions to this document and is therefore not responsible for any errors, omissions, or inaccuracies found within it. Tehnoteka is not liable for damages incurred by users from the use of inaccurate data.
For any additional questions about the product, please contact the manufacturer directly for detailed information.
For the latest information on price, available promotions, and technical specifications of the product mentioned in this document, please visit our page by clicking the following link:
https://tehnoteka.rs/p/xiaomi-redmi-note-12-pro-5g-6128gb-crni-akcija-cena/