QSFPTEK - Trusted Transceivers, Optical Network Solution Partner
User Guide for QSFPTEK models including: S5300-24P4X 24 Port Gigabit Ethernet, S5300-24P4X, 24 Port Gigabit Ethernet, Port Gigabit Ethernet, Gigabit Ethernet, Ethernet
prieš 7 valandas — S5300-24P4X Quick Start Guide. 24-Port Gigabit Ethernet L2 Switch. 24x 1G RJ45 PoE Ports @370W, with 4x 10G SFP Uplinks,. Up to 100M Transmit, Support ...
19 hours ago — S5300-24P4X Quick Start Guide. 24-Port Gigabit Ethernet L2 Switch. 24x 1G RJ45 PoE Ports @370W, with 4x 10G SFP Uplinks,. Up to 100M Transmit, Support ...
File Info : application/pdf, 9 Pages, 566.82KB
DocumentDocumentS5300-24P4X Quick Start Guide V2.0 24-Port Gigabit Ethernet L2+ Switch 24x 1G RJ45 PoE+ Ports @370W, with 4x 10G SFP+ Uplinks, Up to 100M Transmit, Support Stacking www.qsfptek.com V2.0 1/9 0 Introduction The S5300-24P4X is a gigabit access switch with 24x GE RJ45 PoE+ ports and 4x 10GE SFP+ uplinks and supports stacking of up to 2 switches. This 24-port PoE+ switch has built-in two intelligent fans, which can automatically adjust the fan speed to save on usage costs. The switch can be easily controlled and managed through both CLI and WEB interfaces, allowing for realtime monitoring and improved management efficiency. This makes the S5300-24P4X an ideal choice for enterprise networks, government, surveillance systems, and diskless working environments. We appreciate your decision to select S5300-24P4X. This manual is intended to help you become acquainted with the switch design and provide instructions for implementing the switches into your network. Accessories www.qsfptek.com V2.0 2/9 0 Hardware Overview Front Panel Ports Ports RJ45 SFP+ CON Front Panel LEDs Description 100/1000BASE-T ports for Ethernet connection SFP+ ports for 1/10G connection An RJ45 console port for serial management LEDS RJ45 (1-24) SFP+ (TE1-TE4) SYS LED PWR LED Back Panel Status / / / / Description On 1G port link. On 10G port link. / If the SYS indicator flickers, the system works normally. / If the PWR indicator is always on, the device is powered on. Abbrev Grounding column www.qsfptek.com Name The grounding column V2.0 0 Description The grounding column must be fine. 3/9 POWER AC power supply Input voltage: AC100~240V Installation Requirements Tools Preparation Screwdriver Static-proof wristband Bolt Ethernet cable Other Ethernet terminal devices Control terminal Safety Principles Keep dustless and clean during or after the installation. Put the cover in a safe place. Put tools in the right place where they are not easily falling down. Put on relatively tight clothes, fasten the tie or scarf well and roll up the sleeve, avoiding stumbling the machine box. Put on protective glasses if the environment may cause damage to your eyes. Avoid incorrect operations that may cause damage to humans or devices. Site Environment Make sure that the workshop is well-ventilated, the heat of electrical devices is welldischarged Avoid damaging devices by following the electrostatic discharge prevention procedure. S5300-24P4X Hardware Installation Manual Put the machine box in a place where cool air can blow off the heat inside the machine box. Make sure the machine box is sealed. Mounting the Switch www.qsfptek.com V2.0 4/9 0 Connecting the Power Plug the AC power cord to the switch power port on the back rear. Connect the other end of the power cord to an AC power source equipment. Connecting the RJ45 Ports www.qsfptek.com V2.0 5/9 0 Connect one end of the Ethernet cable to the RJ45 port on networking equipment, such as PC, printer, server, storage, etc. Connect the other end of the Ethernet cable to the switch RJ45 port. Connecting the SFP+ Port Insert the SFP+ module into the SFP+ port. Plug a fiber patch cable into the SFP+ transceiver. Connect the other end of the fiber to the device that you want to realize data communication. Connecting the Management Ports Connecting the Console Port Prepare a console cable. Insert the RJ45 connector of the console cable into the console port on the switch. Connect the DB9 female connector on the other end of the console cable to the serial port on the computer host. www.qsfptek.com V2.0 6/9 0 Configuring the Switch Configuring the Switch Using the Web-based Interface Step 1: Connect your computer to the switch using an Ethernet cable and open a web browser. Step 2: Set the IP address of the computer to 192.168.0.x (where "x" is any number from 2 to 254) and the subnet mask to 255.255.255.0. Step 3: Open a web browser and type http://192.168.0.2 in the address bar. Enter the default username and password (admin/admin). Step 4: Click sign-in to access the web-based configuration page. www.qsfptek.com V2.0 7/9 0 Configuring the Switch Using the Console Port Step 1: Use the console cable to directly connect the switch console port to your computer. Step 2: Launch the terminal simulation software such as Hyper Terminal on the computer. Step 3: Configure the parameters of the terminal emulation software as follows: 9600 bits per second, 8 data bits, no parity, 1 stop bit, and no flow control. Step 4: Enter the default username and password (admin/admin). Troubleshooting Hardware Fault Analysis 1. Power and cooling systems--power and fan 2. Port, cable and connection--ports on the front panel of the switch and the cables connecting these ports Faults Relative to Power and Cooling System Do the following checkups to help remove the fault: www.qsfptek.com V2.0 8/9 0 1. When the power on-off is at the "ON" location, check whether the fan works normally. If the fan does not work well, check the fan. 2. If the switch is too hot, check whether the air outlet and air inlet are clean and then do relative operations in section 2.3 "Requirements for Common Locations". 3. If the switch cannot be started and the PWR indicator is off, check the power. Faults Relative to Port, Cable and Connection Do the following checkups to help remove the fault: 1. If the port of the switch cannot be linked, check whether the cable is correctly connected and whether the peer connection is normal. 2. If the power on-off is at the "ON" location, check the power source and the power cable. 3. If the CLI port does not work after the system is started up, check whether the CLI port is set to a baud rate of 9600 bps, eight data bits, no sum check bit, one stop bit and no traffic control. Support and Other Resources Contact us Customer Success Email https://www.qsfptek.com/company/contact-us.html https://www.qsfptek.com/resources/customer-success-stories support@qsfptek.com Product Warranty S5300 series switches are backed by a 5-year limited warranty supported by QSFPTEK. You are eligible to apply for a return within 14 days and exchange within 90 days of receiving them. For more details about applying qualifications, please live chat or email sales@qsfptek.com for support. 5 Year Warranty www.qsfptek.com 14-day Return Window V2.0 9/9 0