Joie signature float 4WD Drift Horizontal Lightweight Trolley Instruction Manual

Instruction Manual for Joie signature models including: float 4WD, float 4WD Drift Horizontal Lightweight Trolley, Drift Horizontal Lightweight Trolley, Horizontal Lightweight Trolley, Lightweight Trolley, Trolley

float™ 4WD drift

float™ 4WD drift 產品說明書

Joie float™ 4WD drift 橫輕巧 x 雙向手推車

22 feb 2023 — Please read all the instructions in this manual before assembling and using this product. Open Stroller see images 1. Push secondary lock 1 - 1 and squeeze one- ...

File Info : application/pdf, 21 Pages, 2.59MB

Joie-signature-float-4wd-drift-instruction-manual

floatTM 4WD drift

15kg/0-36

FIGURE 1 ~ 5 FIGURE 6 ~ 11

FIGURE 12 ~ 16 FIGURE 17 ~ 21

FIGURE 22 ~ 23 FIGURE 24 ~ 26

2 1

FIGURE 27 ~ 31 FIGURE 32 ~ 37

FIGURE 38 ~ 42

NOTE

CNS 12940 2013

CNS

joiebaby.com

Joie!

1-9

Allison Baby UK Ltd. Venture Point, Towers Business Park, Rugeley, Staffordshire, WS15 1UZ www.joiebaby.com www.joiebaby.com.cn

Float

15 0-36

6.1

880mmx460mmx1000mm

(// )

4312

02-27973000

52603333

Chickabiddy Co., Ltd

1865

0800-001-256 / 02-25781188

04222671

www.chick.com.tw

0800-001-256 / 02-25781188

1 2 3 4 5 6 7

8 9 10 11 12 / 13
14

14 15 16 17 18
15

10 17

1 2 3 4 5

! ! 15
! ! 4.5
! ! !
!
! !
! ! ! ! ! !
!

! !
! ! ! ! ! ! ! / ! ! ! ! ! PE
! ! ! ! !

Stroller Assembly 1-9
Please read all the instructions in this manual before assembling and using this product.
OpenStroller
see images 1 Push secondary lock 1 - 1 and squeeze one-hand-fold button. 1 - 2
Meanwhile, pull the stroller backward to open. Latches should click into place.
! Check that the stroller is completely open before continuing.
1
Assemble Canopy
seeimages2 - 4 1 - 1 1 - 2 "" Assemble & Detach Armbar
see images 5 - 7
!The armbar can be pulled up on both left and rightsides.
Press armbar release button 7 - 1, and then pull up the armbar. 7 - 2
Tip Armbar can be removable or pivot open for stroller entry.
- The com2pletely a4ssembled stroller is shown as 8

Stroll&er Operation
5 - 7

Adjust BackrestAngle

see images 9 - 10
Recline Backrest

- 1

- 2 P7ull tab to recline backrest. 9

! Hold the backrest with

the other hand if a child is already seated in the stroller.

Raise Backrest 8
Hold both left and right strings and push up the angle adjuster to raise backrest. 10
! Make sure the backrest angle is set properly for use.

Use Buckle
see images 11 - 12 Release Buckle
Press the center button to release the buckle. 11

Lock Bu9ckle- 10
Match the waist belt buckle with the shoulder buckle 12 - 1, and click into the center buckle. 12 - 2
A click sound means the buckle is locked completely. 12 - 3

!
!

To avoid serious injury from falling or sliding out, always secure your child with harness.

Make sure your child is snugly secured, the space between the child and the shoulder harness is about the

! thickness of one hand. ! Do not cross the shoulder belts. This will cause pressure on child's neck.

Use Shoulder& Waist Harnesses 10 !see images 13 -16
! In order to protect your child from falling out, after your child is placed into the seat, check whether the

shoulder and waist harnesses are at proper height and length.

13 - 1 13 - 2

Shoulder harness anchor A Slide adjuster

- For large1r1child, u1s2e shoulder harness anchor A and the highest shoulder slots. For smaller child, use shoulder harness anchor A and the lowest shoulder slots.
To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward.

Thread it through the shoulder harness slot from back to front. 14 Re1th1read it through the slot that is closest to
child's shoulder height. 15
Use slide adjuster to change the harness length. 16 - 1

Press the button 16 - 2, while pulling1th2e w-ais1tharnessto proper length. 16- 3

12 - 2"" 12 - 3 !AdjustCalfSupport
see images 17 - 18
! There are two recline angles, 1-2 17 for adjustment.

To raise calf support, push the calf support from position 1 to position 2 17
To lower calf support, press the adjustment buttons on both sides of the calf
! support 18 - 1, and rotatethecalf support downwards. 18 - 2

STROLLEROPERATION

Use Canopy
see images 19

- To open 1th3e cano1p6y, pull canopy toward front. 19

To
!

fold the canopy, pull canopy toward back. 19

Switch 13

-Ha1ndleDirection

see images 20

- 2 ! Ma1ke3sure child's hands and legs are clear from the armrest when switching the handle.

! Front swiveling wheels or rear swiveling wheels can be locked automatically when you use the handle in rear

facing position or front facing position.

UseFront Swivel Lock

see images21 - 23 14

Pull up the front swivel locks to maintain the moving direction. 21 22

Tip

15
It is recommended to use swivel lock on uneven surfaces.

- 1 - 2 ! After switching the handle position, push the stroller forward to1e6nsure that the wheels neare1st6to you are

lockedanddonotswivel. 23 16 - 3

Use Brake
see images 24
- To lock w1h7eels, s1te8p on the brake lever. Front wheel is shown as 24 - 1, rear wheel is shown as 24 - 2.
Lift the brake lever to release wheel.
! Tip The brake must be engaged when placing and removing children.

TipAlways applybrake when stroller is in stoppe3dposition. 17

Tip To ensure brake is fully on, gently rock the stroller backwards and forwards before releasing the handle.

17
WARNING To prevent potential hazard, always make sure the parking device for all swiveling wheels are

engaged whenyou reverse the handle. 18 - 1

18 - 2

Fold Stroller
see images 25 - 26
Please fold the canopy before folding the stroller. 19
Push sec1o9ndary lock 25 - 1 and squeeze one-hand-fold button 25 - 2 Push the stroller forward to fold. A click sound means the stroller is folded completely. 26 19

UseAccessory
Accessories may be sold separately or may not be available depending on region.
20
Use Shoulder Harness Cover
! The shoulder harness cover can be removed from the webbing. Simply reverse these steps to re-assemble shoulder harness cover.
!Use Armbar Cover
The armbar cover can be removed from the armbar. Simply reverse these steps to re-assemble armbar cover.

Use Head Support & Infant Insert
see images 27
21 - 23 Dseeetimaacghes&28A-s38semble Soft Goods 21 22 To re-assemble seat soft goods, follow the steps above in reverse 38 - 28

!Careand Maintenance

see images39

To clean stroller frame, use only household soap and care label for instructions on cleaning the fabric parts

wofartmhews2tar3toelrle. rN. o

bleach

detergent.

Please

refer

the

! Removable soft goods can be washed by machine. No bleach. Do not twist the seat cover and inner padding
to dry with great force. It may leave the seat cover and inner padding with wrinkles.
! From time to time, check your stroller for loose screws, worn parts,torn material or stitching. Replace or repair
the parts as needed. Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to
preven2t4the formation of rust if the stroller has come into contact with water.

- 1& - 2 ! Excessive exposure to sun or heat could caus2e4fading or wa2r4ping of parts.

! If stroller becomes wet, open canopy and allow to dry thoroughly before storing. ! If wheels squeak, use a light oil (e.g., Silicon Spray, antirust oil, or sewing machine oil). It is important to get the
oil into the axle and wheel assembly. 39
! When using your stroller at the beach or other sandy/dusty environments, completely clean your stroller after
useto remove sand andsaltfrommechanisms and wheel assemblies.

STROLLEROPERATION

UseCanopy
see images 19

- To open 2th5e cano2p6y, pull canopy toward front. 19

- 1& - To fold the canopy, pull canopy toward back.

119

!
!SwitchHandleDirection see images 20
! Make sure child's hands and legs are clear from the armrest when switching the handle.
! Front swiveling wheels or rear swiveling wheels can be locked automatically when you use the handle in rear

facing position or front facing position.

Use Front Swivel Lock
- see imag2e7s 21 -2283 ! Pull up the front swivel locks to maintain the moving direction.1291 22
Tip It is recommended to use swivel lock on uneven surfaces.
! After switchingthehandleposi2tio7n, -pus1hthestrollerforward28to ensure that the wheels2n7ea-res2t to you are locked and do not swivel. 23

UseBrake
see images 24
To lock wheels, step on the brake lever. Front wheel is shown as 24 - 1, rear wheel is shown as 24 - 2.
Lift the brake lever to release wheel.
Tip The brake must be engaged when placing and removing children. Tip Always apply brake when stroller is in stopped position.
Tip T2o9ensure brake is fully on, gently rock the stroller backwards and forwards before releasing the handle. ! WARNING To prevent potential hazard, always make sure the parking device for all swiveling wheels are
engaged when you reverse the handle.

FoldStroller
see images 25 - 26
Please fold the canopy before folding the stroller. 19
Push secondary lock 25 - 1 and squeeze one-hand-fold button 25 - 2 Push the stroller forward to fold.
A click sound means the stroller is folded completely. 26

UseAccessory&
Access3o0ries may be sold separately or may not be available depending on region. Use Shoulder Harness Cover

The shoulder harness cover can be removed from the webbing. Simply reverse these steps to re-assemble
& shoulder harness cover.

Use Ar3m1bar-Co4v0er

- - The armbar cover can be removed from the armbar. Simply reverse these steps to re-assemble armbar cover.

31 40

40 31

Use Head Support & Infant Insert

see images 27

Deta4c1h & Assemble Soft Goods
see images 28 - 38
To re-assemble seat soft goods, follow the steps abovein reverse 38- 28 41

! CareandMaintenance
! seeimages39 ! To clean stroller frame, use only household soap and warm water. No bleach or detergent. Please refer to the
! care label for instructions on cleaning the fabric parts of the stroller.
! Removable soft goods can be washed by machine. No bleach. Do not twist the seat cover and inner padding
to dry with great force. It may leave the seat cover and inner padding with wrinkles.

! From time to time, check your stroller for loose screws, worn parts,torn material or stitching. Replace or repair the parts as needed. Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.

! Excessive exposure to sun or heat could cause fading or warping of parts.

! If stroller becomes wet, open canopy and allow to dry thoroughly before storing.

! If wheels squeak, use a light oil (e.g., Silicon Spray, antirust oil, or sewing machine oil). It is important to get the oil into the axle and wheel assembly. 39

! When using your stroller at the beach or other sandy/dusty environments, completely clean your stroller after use to remove sand and salt from mechanisms and wheel assemblies.

42
!
!
!
! !
! ""(WD-40
) 42 !

floatTM 4WD drift
Instruction Manual Read these instructions carefully before use and keep them for future reference. Your child's safety may be affected if you do not follow these instructions.
Suitable for Child weighing under 15kg (birth - 36 months) ImportantKeep these instructions for future reference.

GB Welcome to JoieTM
This product is a high-quality and light weight stroller, approved to CNS 12940: 2013. It is suitable for a child weighing under 15kg (0-36 months).
Carefully read this instruction manual and follow the installing steps because this is the ONLY way to protect your child from serious injury or death in case of an accident, and to provide comfort to your child while using this product.
The figures in this manual are to illustrate the operating methods and product main features. This model may have differences between features shown. The figures are just for reference.

Contents

Figures

1-9

Emergency

Product Information

Parts List

WARNING

Stroller Assembly

Open Stroller

Assemble Canopy

Assemble & Detach Armbar

Stroller Operation

Adjust Backrest Angle

Use Buckle

Use Shoulder & Waist Harnesses

Adjust Calf Support

Use Canopy

Switch Handle Direction

Use Front Swivel Lock

Use Brake

Use Drift

Fold Stroller

Use Accessory

Use Shoulder Harness Cover

Use Armbar Cover

Use Head Support & Infant Insert

Detach & Assemble Soft Goods

Use Rain Cover

Care and Maintenance

Emergency
In case of emergency or accident, it is most important to have your child taken care of with first aid and medical treatment immediately.

Product Information
Read all the instructions in this manual before using this product. If you have any further questions, Please call the service hotline in the sales area.

Allison Baby UK Ltd. Venture Point, Towers Business Park, Rugeley, Staffordshire, WS15 1UZ www.joiebaby.com www.joiebaby.com.cn

Product Model Suitable for
Materials Made in

Float 4WD drift Stroller Float Child weighing under 15kg (birth - 36 months) Plastics, metal, fabrics China

Parts List

Make sure all parts are available before assembly. If any part is

missing, please contact local distributor. No tools are required

for assembly.

1 Canopy

8 Footrest 13 Reversible Slider

2 Drift Button

9 Front Swivel 14 Secondary Lock

3 One-Hand-Fold

Lock

15 Handle

Button

10 Front Wheel 16 Storage Basket

4 Head Support 11 Rear Wheel 17 Rear Brake Lever

5 Shoulder Harness 12 3/5 Point 18 Front Brake Lever

Cover

Buckle

6 Armbar

7 Seat Pad

10 17

Accessories

1 Shoulder Harness

Cover

2 Head Support

3 Infant Insert

4 Rain Cover

5 Armbar Cover

Accessories may be sold separately or may not be available depending on region.

WARNING
! Always use the restraint system. Safety belts and restraint systems must be used correctly.
! Ensure that all the locking devices are engaged before use. ! Do not let your child play with this product. ! Adult assembly required. ! Use the stroller with a child weighing less than 15kg. It will
cause damage to the stroller with an unfitted child. ! To prevent a hazardous, unstable condition, do not place
more than 4.5kg in the storage basket. ! Never leave your child unattended. Always keep child in view
while in stroller. ! Use the stroller with only one child at a time. Never place
purses, shopping bags, parcels or accessory items on the handle or canopy. ! Accessories which are not approved by the manufacturer shall not be used. Only replacement parts supplied or recommended by the manufacturer shall be used. ! Never use accessories, parts or components not produced or approved by the manufacturer. Please read the instruction manual carefully. ! Please read all the instructions in the manual before using the product. Please save instruction manual for future use. Failure to follow these warnings and instructions may result in serious injury or death. ! To avoid serious injury from falling or sliding out, always use seat belt. ! Make sure your child's body is clear from the moving parts when adjusting the stroller. ! Be sure the stroller is fully open or folded before allowing child near the stroller. ! Child may slip into leg openings and be strangled if the harness is not used. ! Never use stroller on stairs or escalators. ! Keep away from high temperature objects, liquids, and electronics. ! Never allow your child to stand on the stroller or sit in the stroller with head toward front of stroller. ! Never place the stroller on roads, slopes or dangerous areas.

! To avoid strangulation, DO NOT place items with a string around your child's neck, suspend strings from this product, or attach strings to toys.
! Any load attached to the handle and/or on the back of the backrest and/or on the sides of the stroller will affect the stability of the stroller.
! DO NOT lift stroller while child is in stroller. ! DO NOT use storage basket as a child carrier. ! To prevent tipping, never let child climb the stroller. Always
lift the child in and out of the stroller. ! To avoid finger entrapment, use care when folding and
unfolding the stroller. ! To avoid injury, ensure that your child is kept away when
unfolding and folding this product. ! To ensure your child's safety, please make sure all parts are
assembled and fastened properly before using the stroller. ! To avoid strangulation, do make sure your child is clear from
the canopy or rain cover. ! Always engage the brakes when parking the stroller. ! Discontinue using stroller if it is damaged or broken. ! Stroller to be used only at walking speed. This product is
not intended for use while jogging. ! To avoid suffocation, remove plastic bag and packaging
materials before using this product. The plastic bag and packaging materials should then be kept away from babies and children. ! This product is not suitable for running or skating. ! Pushchair designed to be used from birth shall recommend the use of the most reclined position for new born babies. ! The parking device shall be engaged when placing and removing children.

STROLLER ASSEMBLY STROLLER OPERATION

Stroller Assembly
(Please refer to figures on page 1-9) Please read all the instructions in this manual before assembling and using this product.
Open Stroller
see image 1 Push secondary lock 1 - 1and squeeze one-hand-fold button. 1 - 2 Meanwhile, pull the stroller backward to open. Latches should click into place. ! Check that the stroller is completely open before continuing.
Assemble Canopy
see images 2 - 4
Assemble & Detach Armbar
see images 5 - 7
The armbar can be pulled up on both left and right sides. Press armbar release button 7 - 1, and then pull up the armbar. 7 -2
Tip Armbar can be removable or pivot open for stroller entry. The completely assembled stroller is shown as 8
Stroller Operation
Adjust Backrest Angle
see images 9 - 10
Recline Backrest Pull tab to recline backrest. 9 ! Hold the backrest with the other hand if a child is already
seated in the stroller.

Raise Backrest Hold both left and right strings and push up the angle adjuster to raise backrest. 10
! Make sure the backrest angle is set properly for use.
Use Buckle
see images 11 - 12
Release Buckle Press the button, the buckle will release automatically. 11
Lock Buckle
Match the waist belt buckle with the shoulder buckle 12 - 1, and align them with the center buckle, the buckle can lock automatically. 12 - 2 A "click" sound means the buckle is locked completely. 12 - 3 ! To avoid serious injury from falling or sliding out, always
secure your child with harness.
! Make sure your child is snugly secured, the space between the child and the shoulder harness is about the thickness of one hand.
! Do not cross the shoulder belts. This will cause pressure on child's neck.
Use Shoulder & Waist Harnesses
see images 13 - 16
! In order to protect your child from falling out, after your child is placed into the seat, check whether the shoulder and waist harnesses are at proper height and length.
13 - 1 Shoulder harness anchor
13 - 2 Slide adjuster
For larger child, use shoulder harness anchor and the highest shoulder slots. For smaller child, use shoulder harness anchor and the lowest shoulder slots.

STROLLER OPERATION STROLLER OPERATION

To adjust the position of the shoulder harness anchor, turn the anchor to be level with the side facing forward. Thread it through the shoulder harness slot from back to front. 14 Rethread it through the slot that is closest to child's shoulder height. 15
Use slide adjuster to change the harness length. 16 - 1 Press the button 16 - 2, while pulling the waist harness to proper length. 16 - 3
Adjust Calf Support
see images 17 - 18
There are two recline angles, 1-2 17 for adjustment. To raise calf support, push the calf support from position 1 to position 2 17
To lower calf support, press the adjustment buttons on both sides of the calf support 18 - 1, and rotate the calf support downwards. 18 - 2
Use Canopy
see image 19
To open the canopy, pull canopy toward front. 19
To fold the canopy, pull canopy toward back. 19
Switch Handle Direction
see image 20 ! Make sure child's hands and legs are clear from the armrest
when switching the handle. ! Front swiveling wheels or rear swiveling wheels can be locked
automatically when you use the handle in rear facing position or front facing position.
Use Front Swivel Lock
see images 21 - 23 Press the front swivel locks to maintain the moving direction.
21 22

Tip It is recommended to use swivel lock on uneven surfaces.
! After switching the handle position, push the stroller forward to ensure that the wheels nearest to you are locked and do not swivel. 23
Use Brake
see image 24
To lock wheels, step on the brake lever. Front wheel is shown as 24 - 1, rear wheel is shown as 24 - 2. Lift the brake lever to release wheel.
Tip The brake must be engaged when placing and removing children.
Tip Always apply brake when stroller is in stopped position. Tip To ensure brake is fully on, gently rock the stroller
backwards and forwards before releasing the handle.
! WARNING To prevent potential hazard, always make sure the parking device for all swiveling wheels are engaged when you reverse the handle.
Use Drift
see images 25 - 26
Press the drift button 25 - 1& 26 - 1, all wheels of the stroller can be rotated. 25 26 ! Please release front wheel orientation lock and rear wheel
brake pedal before use drift. ! When use drift, all wheels are in free rotation status, please
be sure to push the stroller forward for a distance to make rear wheels return to locked state after use drift, then stroller can be used normally.
Fold Stroller
see images 27 - 28
Please fold the canopy before folding the stroller. 19
Push secondary lock 27 - 1 and squeeze one-hand-fold button 27 - 2 Push the stroller forward to fold.
A click sound means the stroller is folded completely. 28

STROLLER OPERATION STROLLER OPERATION

Use Accessory
Accessories may be sold separately or may not be available depending on region.
Use Shoulder Harness Cover
see image 29 The shoulder harness cover can be removed from the webbing. Simply reverse these steps to re-assemble shoulder harness cover.
Use Armbar Cover
The armbar cover can be removed from the armbar. Simply reverse these steps to re-assemble armbar cover.
Use Head Support & Infant Insert
see image 30
Detach & Assemble Soft Goods
see images 31 - 40 To re-assemble seat soft goods, follow the steps above in reverse 40 - 31
Use Rain Cover
see image 41
To assemble the rain cover, place it over the stroller, and then attach the seaps and hook and loop fasteners on the rain cover. ! When using the rain cover, please always check its ventilation. ! When not in use, please check that the rain cover has been
cleaned and dried before folding. ! Do not fold the stroller after assembling the rain cover. ! Do not place your child into the stroller assembled with rain
cover during hot weather.

Care and Maintenance
see image 42
! To clean stroller frame, use only household soap and warm water. No bleach or detergent. Please refer to the care label for instructions on cleaning the fabric parts of the stroller.
! Removable soft goods can be washed by machine. No bleach. Do not twist the seat cover and inner padding to dry with great force. It may leave the seat cover and inner padding with wrinkles.
! From time to time, check your stroller for loose screws, worn parts,torn material or stitching. Replace or repair the parts as needed. Periodically wipe clean plastic parts with a soft damp cloth. Always dry the metal parts to prevent the formation of rust if the stroller has come into contact with water.
! Excessive exposure to sun or heat could cause fading or warping of parts.
! If stroller becomes wet, open canopy and allow to dry thoroughly before storing.
! If wheels squeak, use a light oil (e.g., Silicon Spray, antirust oil, or sewing machine oil). It is important to get the oil into the axle and wheel assembly. 42
! When using your stroller at the beach or other sandy/dusty environments, completely clean your stroller after use to remove sand and salt from mechanisms and wheel assemblies.

Allison Baby UK Ltd. Venture Point, Towers Business Park Rugeley, Staffordshire, WS15 1UZ

view all fine signature selections at joiebaby.com/signature

IM-000402I

References

创造亲子间喜悦与欢乐生活-儿童安全座椅十大品牌-轻便婴儿推车-婴儿手推车品牌怎么选 - Joie China | Explore Joie

Adobe PDF Library 16.0.7 Adobe InDesign 17.2 (Macintosh)