JOYO JW-05R Wireless Audio Interface - Owner's Manual

Product Introduction

The JOYO JW-05R is a 2.4G wireless system designed for seamless live streaming and audio transmission. It eliminates the need for multiple cables, allowing for easy frame adjustments during live streams. The system supports bidirectional transmission, enabling users to live stream or play music via their smartphone.

Key Features:

• 2.4G wireless system
• No multiple cables required
• Supports bidirectional transmission
• Allows smartphone live streaming and music playback

Parameters

• Frequency: 2400~2483.5MHz
• Frequency Response: 20Hz~22kHz +/-1dB
• SNR: 90dB
• Transmission Delay: 9ms
• Sampling Rate: 48KHz
• Bit Depth: 24 bits
• Max Transmission Distance: 15-20m (barrier-free), 10-15m (with obstacles or noise)
• Charging Input Voltage: DC4.8~5.4V

Transmitter Specifications

• Battery Type: Lithium battery
• Built-in Battery Capacity: 85mAh 3.7V
• Working Hour: Approx. 4-5 hours on a full charge
• Charging Time: Approx. 1 hour (5V/1A)

Receiver Specifications

• Connection: Lightning port or Type-C port
• Power: Plug and play, no external battery required

Functionality

Transmitter

• 1. 3.5mm 4-pole Jack: For connecting to amplifier's analog live streaming jack.
• 2. Communication/Power Indicator: Flashes blue when on but not connected; solid blue when connected; flashes red when low battery; solid red when charging (red LED turns off when fully charged).
• 3. Power Adapter/Pairing Button: Long press for 2 seconds to turn on/off; double-click to pair.
• 4. Type-C USB Jack: For charging the transmitter.

Receiver

• 5. USB Type-C Connector: For connecting to the smartphone.
• 6. Charging Port: Allows charging the smartphone while in use.
• 7. Power/Signal Indicator: Flashes blue when on but not connected; solid blue when connected successfully.

Package Contents

• 1 x Transmitter
• 2 x Receiver
• 1 x Type-C charging cable
• 1 x Type-C audio conversion line
• 1 x Lightning audio conversion line

How to Use

1. Preparation: Fully charge the transmitter using the Type-C charging cable (approx. 1 hour).
2. Connect Receiver: Connect the receiver to your smartphone. The LED will flash blue.
3. Power On & Connect: Press and hold the transmitter's power button for 2 seconds to turn it on. The LED will flash blue. When the receiver and transmitter LEDs change from purple to solid blue, they are successfully connected. You can now use your smartphone's camera, apps, or other devices.

Pairing: You can re-pair the transmitter and receiver by double-clicking the transmitter's power indicator.

Important Notes

• Do not disassemble or repair the product yourself.
• Avoid storing or using the product in hot, damp, dusty areas, or areas with strong vibrations or shocks.
• Do not drop the product, as it may malfunction.
• Do not use alcohol or other cleaning fluids to clean the product.
• Ensure the transmitter and receiver are kept at a distance from wireless routers or other wireless equipment during use.
• Obstructions between the transmitter and receiver can affect transmission distance.
• Due to the nature of lithium batteries, there is a slight self-discharge. Charge the battery every 2 months to prevent low battery protection.
• The capacity of the lithium battery decreases gradually with repeated charging and discharging, affecting the product's lifespan within an acceptable degree over time.

FCC Compliance Information

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement.

Manufacturer Information

JOYO TECHNOLOGY CO., LTD
Address: 2/F, Lushi Industry Building, 28th District, Bao'an, Shenzhen, 518101 China.
Website: www.joyoaudio.com
Email: Info@joyoaudio.com
Tel: 0086-755-29765361