Owner's Manual for Barcelona LED models including: DS-L, DMX512, DMX512-SPI Decoder and RF Controller, DMX512-SPI, Decoder and RF Controller, RF Controller, Controller
15 hours ago — Press ◁ or ▷ key to change DMX decode start address(001-512), long press for fast adjustment. ... User Manual Ver 2.0.2.
1 day ago — Press ◁ or ▷ key to change DMX decode start address(001-512), long press for fast adjustment. ... User Manual Ver 2.0.2.
DS-L
DMX512-SPI Decoder and RF Controller
DMX512 to SPI decoder and RF controller with digital display. Compatible with 47 kinds of digital IC RGB or RGBW LED strip,
IC type and R/G/B order can be set. Compatible ICs: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, SK6813, UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B(RGBW), SK6812(RGBW), SM16714(RGBW), SM16703P, SM16714D, WS2813(RGBW), WS2814(RGBW), UCS8904B(RGBW), LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A, GS8206, GS8208, UCS2904, SM16804, SM16825, UCS5603, UCS2603. DMX decode mode, stand-alone mode and RF mode selectable. Standard DMX512 compliant interface, set DMX decode start address by buttons. Under stand-alone mode, change mode, speed or brightness by bottons. Under RF mode, match with RF 2.4G RGB/RGBW remote control. 32 kinds dynamic mode, include horse-race, chase, flow, trail or gradual change style.
Technical Parameters
Input and Output Input voltage Power consumption Input signal Output signal Dynamic mode
Control dots
5-24VDC 1W DMX512 + RF 2.4GHz SPI(TTL) x 2 32
170 pixels (RGB 510 CH) Max 900pixels
Safety and EMC
EMC standard (EMC)
Safety standard Radio Equipment(RED) Certi cation Warranty Warranty
ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 ETSI EN 300 328 V2.2.2 CE,EMC,RED
5 years
Environment Operation temperature Case temperature (Max.) IP rating
Package Size Gross weight
DMX512
RED
Ta: -30OC ~ +55OC Tc: +65OC IP20 L175x W54 x H27mm 0.122kg
Mechanical Structures and Installations
DMX output + DMX output GND Installation rack DMX input + DMX input GND
Wiring Diagram
D+
DMX OUT
D-
GND
DMX IN
D+
M
D-
GND
Setting key
CLK2 DATA2 CLK1 DATA1 VVV+ V+
Digital display
INPUT 5-24VDC
SPI SIGNAL OUTPUT
CLK2 signal output DATA2 signal output CLK1 signal output DATA1 signal output
Installation rack Power input Power input Power input + Power input +
50mm
170mm 23mm
DMX Master
SPI SIGNAL OUTPUT
D+
DMX OUT
D-
GND
DMX IN
D+
M
D-
GND
INPUT 5-24VDC
CLK2 DATA2 CLK1 DATA1 VVV+ V+
V+
DA RGB LED pixel strip
V-
AC100-240V
Power Supply 5-24VDC Constant Voltage
Note: If the SPI LED pixel strip is single-wire control, the DATA and CLK output is same, we can connect up to 4 LED strips. If the SPI LED pixel strip is two-wire control, we can connect up to 2 LED strips.
User Manual Ver 2.0.2 2024.03
Page 1
Operation
IC type, RGB order and pixel length length setting
You must rst assure IC type, RGB order and pixel length of the LED strip is correct. Long press M and key, prepare for setup IC type, RGB order, pixel length, automatic blank screen,
Short press M key to switch four item. Press or key to setup value of each item. Long press M key for 2s, or timeout 10s, quit setting.
IC type
RGB order
pixel length disable automatic blank screen
IC type table:
No.
C11
C12
C13 C14 C15 C16 C17 C18 C19 C21 C22 C23 C24 C25 C31 C32 C33 C34 C35 C36 C37 C38 C39
IC type
TM1803
TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,SK6813,UCS2903, UCS2909,UCS2912,WS2811,WS2812,WS2813,WS2815,SM16703P TM1829 TLS3001,TLS3002 GW6205 MBI6120 TM1814B(RGBW)
SK6812(RGBW),WS2813(RGBW),WS2814(RGBW) UCS8904B(RGBW) LPD6803,LPD1101,D705,UCS6909,UCS6912 LPD8803,LPD8806
WS2801,WS2803 P9813 SK9822 TM1914A GS8206,GS8208 UCS2904 SM16804 SM16825 SM16714(RGBW) UCS5603 UCS2603 SM16714D
RGB order: O-1 - O-6 indicate six order (RGB, RBG, GRB, GBR, BRG, BGR). Pixel length: Range is 008-900. Automaticblankscreen: enable ("bon") or disable("boF") automatic blank screen.
Output signal
DATA
DATA
DATA DATA DATA DATA DATA DATA DATA DATA,CLK DATA,CLK DATA,CLK DATA,CLK DATA,CLK DATA DATA DATA DATA DATA DATA DATA DATA DATA
DMX decode mode
There are three DMX decode modes selectable. DMX decode mode 1: the DMX data change light directly; DMX decode mode 2: switch dynamic modes, brightness grade and speed grade via 3 DMX data. DMX decode mode 3: the DMX data change light directly (One data copy triple, control one pixel, for SPI type white light strip).
DMX decode mode
Long press M, and key at the same time to switch DMX decode mode(display"d-1") and DMX decode mode(display"d-2"). Long press M key for 2s, and then return to DMX address interface.
User Manual Ver 2.0.2 2024.03
Page 2
DMX decode mode 1: Short press M key, when display 001-512, enter DMX decode mode.
Press or key to change DMX decode start address(001-512), long press for fast adjustment. Long press M key for 2s, prepare for setup decode number and multiple of pixels.
Short press M key to switch two item.
Press or key to setup value of each item. Decode number(display "dno") : DMX decode channel number, range is 003-600(for RGB). Multiple of pixels(display "Pno") : Each 3 DMX channel control length (for RGB), range is 001- pixel length. Long press M key for 2s, or timeout 10s, quit setting. If there is a DMX signal input, will enter DMX decode mode automatically.
For example, the DMX-SPI decoder connect with RGB strip: DMX data from DMX512 console:
DMXCH 1 2 3 4 5 6 7 8 DMX Data 255 0 0 0 255 0 0 0
9 10 11 12 255 255 255 0
13 14 15 16 17 18 0 255 255 255 0 255
DMX-SPI decoder output (start address: 001, decode channel number: 18, each 3 channel control length: 1):
V+ DA V-
DMX-SPI decoder output (start address: 001, decode channel number: 18, each 3 channel control length: 3):
V+ DA V-
DMX decode mode 2: Short press M key, when display 001-512, Press or key to change DMX decode start address(001-512), long press for fast adjustment.
For example, when the DMX start address is set to 001. The address 1 of DMX console is for dynamic light type setting (32 modes), address 2 is for brightness setting (10 levels), address 3 is for speed setting (10 levels). Long press M key for 2s, or timeout 10s, quit setting.
Address 1 of DMX console: dynamic light mode
1: 0-8
2: 9-16
3: 17-24
9: 65-72
10: 73-80
11: 81-88
17: 129-136 18: 137-144 19: 145-152
25: 193-200 26: 201-208 27: 209-216
4: 25-32 12: 89-96 20: 153-160 28: 217-224
5: 33-40 13: 97-104 21: 161-168 29: 225-232
6: 41-48 14: 105-112 22: 169-176 30: 233-240
7: 49-56 15: 113-120 23: 177-184 31: 241-248
8: 57-64 16: 121-128 24: 185-192 32: 249-255
Address 2 of DMX console: Brightness (When address 2 data <5, turn off the light)
1: 5-25 (10%)
2: 26-50 (20%)
3: 51-75(30%)
4: 76-100(40%) 5: 101-125(50%)
6: 126-150(60%) 7: 151-175(70%) 8: 176-200(80%) 9: 201-225(90%) 10: 226-255(100%)
Address 3 of DMX console : Speed
1: 0-25(10%)
2: 26-50(20%)
6: 126-150(60%) 7: 151-175(70%)
3: 51-75(30%) 8: 176-200(80%)
4: 76-100(40%)
5: 101-125(50%)
9: 201-225(90%) 10: 226-255(100%)
DMX decode mode 3: Short press M key, when display 001-512, enter DMX decode mode. Press or key to change DMX decode start address(001-512), long press for fast adjustment. Long press M key for 2s, prepare for setup decode number and multiple of pixels.
Short press M key to switch two item. Press or key to setup value of each item. Decode number(display "dno") : DMX decode channel number, range is 001-512. Multiple of pixels(display "Pno") : Each one DMX channel control length, range is 001- pixel length. Long press M key for 2s, or timeout 10s, quit setting. If there is a DMX signal input, will enter DMX decode mode automatically.
The DMX-SPI decoder connect with white strip, one DMX data control three LED beads:
For example, DMX data from DMX512 console: DMXCH 1 2 3 4 5 6 DMX Data 255 192 128 64 0 255
DMX-SPI decoder output (start address: 001, decode channel number: 6, each one channel control length: 1):
Output data 255 255 255 192 192 192 128 128 128 64 64 64 0 0 0 255 255 255
DMX-SPI decoder output (start address: 001, decode channel number: 6, each one channel control length: 2):
Output data 255 255 255 255 255 255 192 192 192 192 192 192 128 128 128 128 128 128 64 64 64 64 64 64 0 0 0 0 0 0 255 255 255 255 255 255
User Manual Ver 2.0.2 2024.03
Page 3
Stand-alone mode
Short press M key, when display P01-P32, enter stand-alone mode. Press or key to change dynamic mode number (P01-P32). Each mode can adjust speed and brightness.
Long press M key for 2s, prepare for setup mode speed and brightness. Short press M key to switch two item. Press or key to setup value of each item. Mode speed: 1-10 level speed(S-1, S-9, S-F). Mode brightness: 1-10 level brightness(b-1, b-9, b-F). Long press M key for 2s, or timeout 10s, quit setting. Enter stand-alone mode only when DMX signal is disconnected or lost.
Stand-alone mode
Speed
Brightness
(8 level) (10 level,100)
Dynamic mode list
No.
Name
No.
Name
No.
Name
P01 Red horse race white ground
P12 Blue White chase
P23 Purple oat
P02 Green horse race white ground
P13 Green Cyan chase P24 RGBW oat
P03 Blue horse race white ground
P14 RGB chase
P25 Red Yellow oat
P04 Yellow horse race blue ground
P15 7 color chase
P26 Green Cyan oat
P05 Cyan horse race blue ground
P16 Blue meteor
P27 Blue Purple oat
P06 Purple horse race blue ground
P17 Purple meteor
P28 Blue White oat
P07 7 color multi horse race
P18 White meteor
P29 6 color oat
P08 7 color horse raceclose + open
P19 7 color meteor
P30 6 color smooth sectionally
P09 7 color multihorse raceclose + open P20 Red oat
P31 7 color jump sectionally
P10 7 color scan close + open
P21 Green oat
P32 7 color strobe sectionally
P11 7 color multi-scan close + open
P22 Blue oat
RF mode Match: Long press M and key for 2s, display "RLS", within 5s, press on/off key of the RGB remote, display "RLO", match is successful,
then use the RF remote to change mode number, adjust speed or brightness. Delete: Long press M and key for 5s, until display "RLE", delete all matched RF remote.
Restore factory default parameter
Long press and key, restore factory default parameter, display"RES". Factory default parameter: DMX decode mode 1, DMX decode start address is 1, decode number is 510,
multiple of pixels 1, dynamic mode number is 1, chip type is TM1809, RGB order, pixel length is 170, disable automatic blank screen, without matched RF remote.
User Manual Ver 2.0.2 2024.03
Page 4
Corel PDF Engine Version 16.1.0.843 CorelDRAW X6