Instruction Manual for LEDYi Lighting models including: SC, SPI RGB RGBW LED RF Controller, SC SPI RGB RGBW LED RF Controller
Index of /wp-content/uploads/2022/04/
User Manual Ver 1.1.0 Page 2 Match Remote Control Match: Short press match key, immediately press on/off key of the remote. Delete: Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted.
LED Controller - LEDYi Lighting
SPI RGB/RGBW LED RF Controller Model No.: SC Compatible with 42 kinds IC/Max 1024 pixels/Wireless remote control Features LVD RED Mini-style multi-pixel RGB RF LED controller with SPI output, match with RF 2.4G RGB/RGBW remote control. Compatible with 42 kinds digital IC RGB or RGBW LED strip, IC type and R/G/B order can be set. Compatible ICs: TM1803, TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912, SK6813, UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2813, WS2815, TM1829, TLS3001, TLS3002, GW6205, MBI6120, TM1814B(RGBW), SK6812(RGBW), WS2813(RGBW), WS2814(RGBW), UCS8904B(RGBW), LPD6803, LPD1101, D705, UCS6909, UCS6912, LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, TM1914A, GS8206, GS8208, UCS2904, SM16804, SM16825. 32 kinds dynamic mode, include horse-race, chase, flow, trail or gradual change style. Technical Parameters Input and Output Input voltage Power consumption Input signal Output signal Dynamic mode Control dots 5-24VDC 1W RF 2.4GHz SPI(TTL) 32 Max 1024 pixels Safety and EMC EMC standard (EMC) Safety standard(LVD) Certification ETSI EN 301 489-1 V2.2.3 ETSI EN 301 489-17 V3.2.4 EN 62368-1:2020+A11:2020 CE,EMC,LVD,RED Environment Operation temperature Case temperature (Max.) IP rating Ta: -30 OC ~ +55 OC T c:+65OC IP20 Warranty and Protection Warranty Protection 5 years Reverse Polarity Weight Net weight Gross weight 0.038kg 0.049kg User Manual Ver 1.1.0 Mechanical Structures and Installations LED indicator Power input Power input + Installation rack Match key SC SPI RGB LED RF Controller GND CLK signal output DATA signal output V+ Installation rack 33 mm 97mm Wiring Diagram SC connect with SPI spot light (TM1803) 18 mm SPI signal SPI spot light Power Supply 5-24VDC Constant Voltage AC100-240V SC connect with SPI pixel strip (LPD6803) SPI signal VCK DA V+ LED pixel strip Power Supply 5-24VDC Constant Voltage AC100-240V Page 1 SC connect with SPI Digital light tube (TM1809) SPI signal SPI digital tube SPI digital tube Power Supply 5-24VDC Constant Voltage AC100-240V Note: If the SPI LED pixel strip is single-wire control, the DATA and CLK output is same, we can connect up to 2 LED strips. Use R9 remote set SPI digital LED strip Set LED strip length [Pixel number(8~1024)]. * + 3 number + * for example: *032*, set pixel number to 32. *600*, set pixel number to 600. *1024*, set pixel number to 1024. Set LED strip chip type. * + 2 number + * *11*TM1803 *12*TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,SK6813,UCS2903,UCS2909,UCS2912, WS2811,WS2812,WS2813,WS2815 *13*TM1829 *14*TLS3001,TLS3002 *15*GW6205 *16*MBI6120 *17*TM1814B(RGBW) *18*SK6812(RGBW),WS2813(RGBW),WS2814(RGBW) *19*UCS8904B(RGBW) *21*LPD6803,LPD1101,D705,UCS6909,UCS6912 *22*LPD8803,LPD8806 *23*WS2801,WS2803 *24*P9813 *25*SK9822 *31*TM1914A *32*GS8206,GS8208 *33*UCS2904 *34*SM16804 *35*SM16825 Set LED strip RGB order. * + 1 number + * *1*RGB, *2*RBG, *3*GRB, *4*GBR, *5*BRG, *6*BGR. User Manual Ver 1.1.0 SC SPI RGB LED RF Controller Compatible IC type No. C11 C12 C13 C14 C15 C16 C17 C18 C19 C21 C22 C23 C24 C25 C31 C32 C33 C34 C35 ICtype TM1803 TM1809,TM1804,TM1812,UCS1903,UCS1909,UCS1912,SK6813 UCS2903,UCS2909,UCS2912,WS2811,WS2812,WS2813,WS2815 TM1829 TLS3001,TLS3002 GW6205 MBI6120 TM1814B(RGBW) SK6812(RGBW),WS2813(RGBW),WS2814(RGBW) UCS8904B(RGBW) LPD6803,LPD1101,D705,UCS6909,UCS6912 LPD8803,LPD8806 WS2801,WS2803 P9813 SK9822 TM1914A GS8206,GS8208 UCS2904 SM16804 SM16825 Outputsignal DATA DATA DATA DATA DATA DATA DATA DATA DATA DATA,CLK DATA,CLK DATA,CLK DATA,CLK DATA,CLK DATA DATA DATA DATA DATA Match Remote Control Match: Short press match key, immediately press on/off key of the remote. Delete: Press and hold match key for 5s to delete all match, The light blinks 5 times means all matched remotes were deleted. Dynamic mode list No. Name No. P01 Red horse race white ground P12 P02 Green horse race white ground P13 P03 Blue horse race white ground P14 P04 Yellow horse race blue ground P15 P05 Cyan horse race blue ground P16 P06 Purple horse race blue ground P17 P07 7 color multi horse race P18 P08 7 color horse race close + open P19 P09 7 color multi horse race close + open P20 P10 7 color scan close + open P21 P11 7 color multi-scan close + open P22 Name Blue White chase Green Cyan chase RGB chase 7 color chase Blue meteor Purple meteor White meteor 7 color meteor Red float Green float Blue float No. P23 P24 P25 P26 P27 P28 P29 P30 P31 P32 Name Purple float RGBW float Red Yellow float Green Cyan float Blue Purple float Blue White float 6 color float 6 color smooth sectionally 7 color jump sectionally 7 color strobe sectionally Page 2Corel PDF Engine Version 16.1.0.843 CorelDRAW X6