Ubiquiti Pro XG 48 PoE Installation Guide

Included Components

• Pro XG 48 PoE unit (1x)
• Mounting brackets (2x, labeled 'b')
• Screws (2x, labeled 'T') for attaching brackets
• Screws (16x, labeled 'M4') for mounting the unit to the rack
• Cage nuts (8x, labeled 'G') for rack mounting
• Screws (8x, labeled '10#-32') for rack mounting
• Power cord (1x, labeled 'P')

Installation Steps

1. Step 1: Identify Components. Lay out all included components: the Pro XG 48 PoE unit, mounting brackets ('b'), 'T' screws, 'M4' screws, cage nuts ('G'), '10#-32' screws, and the power cord ('P').

2. Step 2: Attach Mounting Brackets. Secure the mounting brackets ('b') to both sides of the Pro XG 48 PoE unit using two 'T' screws for each bracket.

3. Step 3: Prepare Rack. Insert cage nuts ('G') into the desired mounting holes in your equipment rack. Then, insert '10#-32' screws into the cage nuts to help hold them in place.

4. Step 4: Mount Unit in Rack. Align the Pro XG 48 PoE unit with the prepared rack mounting holes. Secure the unit to the rack using four '10#-32' screws.

5. Step 5: Connect Power. Plug the power cord ('P') into the power port on the Pro XG 48 PoE unit.

6. Step 6: Connect to Network. Connect your UniFi Cloud Gateway 25G to the Pro XG 48 PoE unit using an appropriate network cable.

7. Step 7: Download UniFi App. Download the UniFi application from the Apple App Store or Google Play Store to manage your device.

8. Step 8: Initial Setup. The UniFi app interface will guide you through the initial setup and configuration of your Pro XG 48 PoE.

If you require further assistance, please visit the Ubiquiti Help Center or contact Ubiquiti Support.