Sigen Energy Controller 5.0-30.0 kW Three Phase Australia
Key Features
- EMS inside for precise control
- Up to 4 MPP trackers
- Multi-source black start
- On & off-grid compatibility
- DC/AC ratio up to 1.6
- IP66 system protection rating
Technical Specifications
| SigenStor EC | 5.0 TP | 10.0 TP | 15.0 TP | 20.0 TP | 25.0 TP | 30.0 TP | Units | |
|---|---|---|---|---|---|---|---|---|
| DC Input (from PV) | ||||||||
| Max. PV power | 8000 | 16000 | 24000 | 32000 | 40000 | 48000 | W | |
| Max. DC input voltage | 1100 | V | ||||||
| Nominal DC input voltage | 600 | V | ||||||
| Start-up voltage | 180 | V | ||||||
| MPPT voltage range | 160~1000 | V | ||||||
| Number of MPP trackers | 2 | 3 | 3 | 4 | 4 | 4 | ||
| Number of PV strings per MPPT | 1 | |||||||
| Max. input current per MPPT | 16 | 20 | 20 | 20 | 20 | 20 | A | |
| Max. short-circuit current per MPPT | 20 | A | ||||||
| AC Output (on-grid) | ||||||||
| Nominal output power | 5000 | 9999 | 15000 | 20000 | 25000 | 29900 | W | |
| Max. output apparent power | 5500 | 9999 | 15000 | 22000 | 27500 | 29900 | VA | |
| Nominal output current | 7.6 | 14.4 | 21.7 | 30.4 | 38.0 | 43.3 | A | |
| Max. output current | 8.4 | 14.4 | 21.7 | 33.4 | 41.8 | 43.3 | A | |
| Nominal output voltage | 380/400 | V | ||||||
| Nominal grid frequency | 50/60 | Hz | ||||||
| Power factor | 0.8 leading ~ 0.8 lagging | |||||||
| Total current harmonic distortion | THDI < 2% | |||||||
| Efficiency | ||||||||
| Max. efficiency | 98.1% | 98.3% | 98.3% | 98.3% | 98.3% | 98.4% | ||
| European efficiency | 96.1% | 97.5% | 97.9% | 97.9% | 98.0% | 98.0% | ||
| AC Output (backup) | ||||||||
| Nominal output power | 5000 | 10000 | 15000 | 20000 | 25000 | 30000 | W | |
| Max. output apparent power | 5500 | 11000 | 16500 | 22000 | 27500 | 33000 | W | |
| Peak output power (10 seconds) | 7500 | 15000 | 22500 | 30000 | 30000 | 36000 | W | |
| Nominal output current | 7.6 | 15.2 | 22.8 | 30.4 | 38.0 | 45.6 | A | |
| Max. output current | 8.4 | 16.7 | 25.1 | 33.4 | 41.8 | 50.1 | A | |
| Peak output current (10 seconds) | 11.4 | 22.8 | 34.2 | 45.6 | 45.6 | 54.7 | A | |
| Nominal output voltage | 380/400 | V | ||||||
| Nominal output frequency | 50/60 | Hz | ||||||
| Power factor | 0.8 leading ~ 0.8 lagging | |||||||
| Total voltage harmonic distortion | THDV < 2% | |||||||
| Disruption time of backup switch | 0 | ms | ||||||
| Battery Connection | ||||||||
| Battery module models | SigenStor BAT 5.0 / 8.0 | |||||||
| Number of modules per controller | 1~6 | pcs | ||||||
| Battery module voltage range | 600~900 | V | ||||||
| Protection | ||||||||
| Safety protection feature | DC reverse polarity protection, Insulation monitoring, Residual current monitoring, Arc fault circuit interrupter 2, AC overcurrent/overvoltage/short-circuit protection. Type II DC/AC surge protection, Anti-islanding protection | |||||||
| General Data | ||||||||
| Dimensions (W/H/D) | 700/300/260 | mm | ||||||
| Weight | 36 | 36 | 36 | 36 | 36 | 38 | kg | |
| Storage temperature range | -40~70 | °C | ||||||
| Operating temperature range | -30~60 | °C | ||||||
| Relative humidity range | 0% ~ 95% | |||||||
| Max. operating altitude | 4000 | m | ||||||
| Cooling | Smart air cooling | |||||||
| System ingress protection rating | IP66 | |||||||
| Communication | WLAN/Fast Ethernet / RS485 / Sigen CommMod (4G/3G/2G) | |||||||
| Standard Compliance | ||||||||
| Standard 3 | IEC/EN 62109-1, IEC/EN 62109-2, IEC/EN 61000-6-1, IEC/EN 61000-6-2 | |||||||
Notes on Standard Compliance:
- This refers to the load-side disruption time. To achieve this functionality, Sigen Energy Gateway needs to be used together with Sigen Energy Controller and Sigen Battery. Test conditions: In the open-circuit state of the power grid, the nominal power of the Sigen Energy Controller is higher than the total power of the home loads.
- This is an optional feature only supported in certain models. Please contact Sigenergy for more information.
- For all standards, refer to the certificates category on the Sigenergy website.
Related Documents
 |
SigenStor BAT Batteriesystem Spezifikationen Technische Spezifikationen und Kompatibilitätsinformationen für das SigenStor BAT Batteriesystem, einschließlich der Modelle 6.0 und 10.0 sowie SigenStor BC. |
 |
Sigen Energy Gateway C&I Series User Manual User manual for the Sigen Energy Gateway C&I Series, providing comprehensive guidance on installation, operation, safety precautions, system maintenance, and troubleshooting for industrial and commercial PV storage applications. |