Instruction Manual for Outline models including: PLS2019 Advanced Loudspeaker Concept Superfly, PLS2019, Advanced Loudspeaker Concept Superfly, Loudspeaker Concept Superfly, Concept Superfly, Superfly
7 ott 2022 — Rigging instructions are contained in the “Superfly/Mantas 28 Rigging. Manual”. Page 6. OUTLINE S.R.L.. Via Leonardo da Vinci, 56. 25020 Flero (Brescia) ...
SUPERFLY – Outline
File Info : application/pdf, 20 Pages, 6.79MB
DocumentDocumentSUPERFLY Advanced Loudspeaker Concept OPERATING MANUAL Superfly Operating Manual Version: 2.0 Release date: 2022/10/07 © Outline 2022. All rights reserved. Refer all servicing to qualified personnel, through your Outline dealer. 2 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it INDICE 1. SAFETY INSTRUCTIONS...................................................................................................4 1.1. INSTRUCTIONS FOR DISPOSAL .............................................................................................................. 4 1.2. CONFORMITY AND WARRANTY .............................................................................................................. 4 2. SYSTEM DESCRIPTION ....................................................................................................5 3. WIRING ............................................................................................................................7 3.1. CONNECTOR SPECIFICATIONS............................................................................................................... 9 3.2. CABLES AND ILLUSTRATIONS ............................................................................................................... 10 4. AMPLIFICATION...............................................................................................................12 4.1. SUPERFLY PRESET ................................................................................................................................. 12 4.2. AVAILABLE PRESETS .............................................................................................................................. 12 4.3. MANUFACTURER EQ ............................................................................................................................... 12 5. OPEN ARRAY 2 AND AIMING............................................................................................13 6. MANTAS 28 DOWNFILL....................................................................................................14 7. RAPID CHECKS : FASTQC-LS...........................................................................................15 8. TECHNICAL SPECIFICATIONS .........................................................................................16 9. OVERALL DIMENSIONS....................................................................................................17 10. NOTES............................................................................................................................18 3 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 1. SAFETY INSTRUCTIONS We suggest you dedicate some time reading this manual in order to get to know this product in depth and ensure you make the most of its use. It is important to remain at a suitable distance from the sound reinforcement system, particularly when it is used at high spl. The Superfly system is designed for sound reinforcement in medium-large sized venues and, due to its performance, could cause hearing damage. Safety precautions to be adopted are as follows: · for all the information regarding the installation of the system (rigging, derigging and all related matters) the "Superfly / Mantas 28 Rigging Manual" must be consulted; · any configuration of an Outline line array system must necessarly be designed and verified with OpenArray2 simulation software; · for installation, the staff involved must know and be familiar with the safety procedure to follow in these situations; · it is absolutely inadvisable to use material, cables, amplifiers, acoustic prediction software or anything else that is not expressly foreseen by Outline. Outline declines any and all responsibility for damage or faulty operation caused by using the Superfly system in a different way from that expressly foreseen and specified: · uncertified or unauthorized modification to any part of the system can damage the system, compromising its real efficiency and safety; · it is advisable to carry out periodic inspections/ checks and any necessary maintenance of the systems, cables and the amplifiers before using them. In the event of wear or accidental damage of the components, Outline will provide specific support for their replacement; · frequently check the conditions and correct operation of the mechanical parts (details can be found in the "Superfly / Mantas 28 Rigging Manual"). Since the system is equipped with loudspeakers/ transducers that produce a static magnetic field, it is strongly advisable to keep any electronic devices or magnetic media of any type (computers, hard disks, magnetic card, etc) at a suitable distance (approximately 1 metre) from the loudspeakers. 1.1. INSTRUCTIONS FOR DISPOSAL The product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this symbol of the crossed "wheelie" bin is attached to a product, it means that the product is covered by the European Directive 2012/19/EU and successive amendments. This means that the product must NOT be disposed of with other household-type waste. Users are responsible for the disposal of their electric and electronic equipment, consigning it to an approved disposal facility. For further information on where it is possible to send equipment for recycling, contact your local distributor. Correct disposal of the old product will help to prevent potential negative consequences for the environment and people's health. 1.2. CONFORMITY AND WARRANTY All Outline electro-acoustic and electronic devices are in conformity with the provisions of EC/EU directives (as stated in our CE declaration of conformity). The CE declaration of conformity is attached to the product warranty certificate and is shipped with the product. 4 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 2. SYSTEM DESCRIPTION As in all Outline products, every single component, the cabinet and relative dimensions, are the result of accurate choices following specific studies based on the idea of the design of the element in question, regarding its use as part of a complete system. Superfly is a three-section active system with no passive crossover filter and fitted with: · two 10"" woofers with double reflex (bandpass) loading for the low frequency section (two separate amplification channels); · two 8" mid-woofers coupled with band-pass hybrid loading with partially horn-loaded output for the mid frequencies (one amplification channel); · a compression driver with a 3" diaphragm, coupled with a D.P.R.W.G. waveguide, and a constant directivity horn for accurate horizontal dispersion control for the high frequency section (one amplification channel). The cabinet is constructed Baltic birch plywood and undergoes a precise assembly process: some parts are made with curved wood, whereas other sections are formed from appropriately shaped panels. This enables to obtain a very rigid cabinet without any internal resonance. Useful external handles are fitted to facilitate handling and installation to the utmost. The material used, along with the polyurea coating, enables the system to be used even in the event of rain. The flying hardware is built into the cabinet's structure: the side bars are fixed, whereas the rear ones have moveable elements that enable to set the flying angle. All bars are manufactured in anodized aluminium alloy to ensure that they are light-weight and long-lasting, whereas the quick-locking pins are in steel and ensure anchorage. Rigging instructions are contained in the "Superfly/Mantas 28 Rigging Manual". 5 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it A special features of the Superfly is its application of SART (Side Acoustic Rejection Technology), which consists in the particular acoustic structure of the LF section, specifically designed to concentrate the low frequencies' energy on the sound projection axis and minimize side emission. This enables to achieve improved horizontal dispersion control, thanks to which considerable benefits will be obtained, for example, on particularly reverberant stages and/or venues where acoustic energy dispersed outside the required coverage area would cause several problems. One of Superfly's strong points is its wide frequency response, from 50 Hz to 20 kHz. This enables to obtain: · the extended bottom end of the low frequencies, even without dedicated subwoofers, makes the Superfly system truly "self-sufficient" for a large number of situations; · powerful controlled emission of the mid frequencies, thanks to the exploitation of the external portion of the horn, shared with the high frequency section; · a long coherent throw up to the highest frequencies, thanks to the use of a D.P.R.W.G, waveguide, which is also loaded by the constant directivity horn that controls horizontal dispersion for the entire frequency range emitted by the MF and HF sections. 6 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it D.P.R.W.G. concept www.outline.it 3. WIRING SERIES LINK C(+) D(-) LOW2 G(+) H(-) HIGH E(+) MID F(-) A(+) B(-) LOW1 Superfly requires 8-pole cable, compatible with the LK08 connectors on his panel: · A[+]/B[-] > · C[+]/D[-] > · E[+]/F[-] > · G[+]/H[-] > LOW1 LOW2 MID HIGH 7 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it DEFAULT 0.25° ONLY UPPER SPEAKER DEFAULT 0.25° ONLY UPPER SPEAKER SUPERFLY 210 wwwwww..oouuttlliinnee.i.tit INPUT MMOODDEL: O SFY210 & S.N° WEIGHT: 39 kg (86 lb) TTEESSTTEEDD WEIGHT S.N°: KKKFT514 LOWER SPEAKER 1.5° - 3.5° - 5.5°- 7.5° CONNECTION SECT. Pmax Zmin A(+)/B(-) LF1 450 W 14.4 ohm C(+)/D(-) LF2 450 W 14.4 ohm 1° - 3° - 5°- 7° 0.5° - 2.5° - 4.5°- 6.5° E(+)/F(-) MF 400 W 12.6 ohm G(+)/H(-) HF 120 W 15.9 ohm 0° - 2° - 4°- 6° 0.25° - REST Made in Italy LINK LOWER SPEAKER 1.5° - 3.5° - 5.5°- 7.5° 1° - 3° - 5°- 7° 0.5° - 2.5° - 4.5°- 6.5° 0° - 2° - 4°- 6° 0.25 - REST It is important to periodically check the conditions of the cables and connectors, as they carry voltage that is potentially dangerous in the event of coming into direct contact with parts of the body. These checks are also carried out to prevent any damage to the components and amplifiers, and above all to avoid faulty system operation. The nominal impedance is 16 Ohms for each of the four power channels. This enables to link up to four elements in parallel on the same number of amplification channels, thus obtaining optimum energy transfer from the amplifiers to the sound system. The components' electroacoustic characteristics are therefore sized coherently with the aforementioned criteria to obtain maximum dynamic performance from the array, while also ensuring conditions of extreme reliability and very low distortion. 8 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 3.1. CONNECTOR SPECIFICATIONS The connection is available on the LK08 connectors The LKi8MF-0.9 cable on the other hand is for (8-pin). Using LKi8MF-25 cable (male/female 8-pole), linking array elements (male/female 8 pin, length 0.9 with its standard length of 25 m, allows the wiring m). Further details can be found in the table in chap. of arrays flown at considerable height. However, by 3.2. means of a specific adaptor, it is possible to create As far as connectors' wiring is concerned, it is an extension by connecting two or more cables of this depicted in the following diagram (identical for all type. Outline products with this type of connector): LKi8MF connector wiring GF A HE B CD G F E A H B DC The SP2-LKi8 cable allows the wiring of elements such as front-fill speakers, down-fill enclosures, etc. fitted with speakON NL4 connectors, with the same panels of the amplifier racks used for Superfly. For elements such as Outline DBS 18-2 subwoofers SP4 LKi8 cables are foreseen, which have 4 speakON NL4, of which 2 are in parallel: SP2 LKi8 connector wiring G F HA B E DC CH 3-4 CH 1-2 SP4 LKi8 connector wiring G F HA B E DC 9 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it 1+ 1- 1+ 1- 1+ 1- 1+ 1- 22+ 22+ 22+ 22+ CH 4 CH 3 CH 1 CH 2 www.outline.it 3.2. CABLES AND ILLUSTRATIONS CODE DESCRIPTION LKI8MF-25 25 m loudspeaker cable (male/female, 8 poles x 4 mm2) LKI8MF-0.9 0,9 m loudspeaker cable (male/female, 8 poles x 4 mm2) SP2 LKI8-15 15 m loudspeaker cable (8 poles x 4 mm2) with LKI8/2 speakon connectors SP2 LKI8-25 25 m loudspeaker cable (8 poles x 4 mm2) with LKI8/2 speakon connectors 10 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it CODE DESCRIPTION SP4 LKI8-11 10 m subwoofer cable (8 poles x 4 mm2) with LKI8/4 speakon connectors SSVLKI8MF Male/female adaptor for LKI8 cables MPULK-3X8 3U Distro unit, 5 poles 32 A line mains plug 3TH+N+E, 6xLK8 loudspeaker sockets for #3 GTA power amplifiers CABLA1-OX8 2U Distro unit, 2 x LK8 loudspeaker sockets, 8x Speakon for #1 GTA power amplifiers 11 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 4. AMPLIFICATION The Superfly system is designed to be used with working condition and expansive dynamics. four amplifier channels. Using any other device may cause damage to the It must be driven by the suggested Outline loudspeaker components and affect performance. amplifiers with DSP presets, which provide dedicated Make sure the linked elements do not exceed the signal processing for each section ensuring safe maximum number of elements per channel. Available Outline amplifiers: GTA series, TTM12K4. 4.1. SUPERFLY PRESET ArmoníaPlus, amplifiers' management software, to a PC running the software through a Fast Ethernet offers a loudspeaker preset library. It is available for connection. free from the Armonía website,where a startup guide It is possible to manage parameters such as levels, and in-depth tutorials are also provided. delay, polarity and input EQ. The preset can be loaded connecting the amplifiers 4.2. AVAILABLE PRESETS Superfly requires dedicated presets for the control of its four sections. As mentioned before, Superfly presets has four ways, therefore loading the preset involves automatically the first and the next three channels of the amplifier as depicted in the picture below. The order in which the sections are loaded follows the same standard used in the wiring panels: MF (mid), HF (high), LF1 (low), LF2 (low). Two presets are available in order to deliver the optimal frequency response for each section of the system, according to the application: · Full-range, i.e. without subwoofer; · High-pass, designed to use with companion subwoofers, with a 70 Hz high-pass filter. 4.3. MANUFACTURER EQ Manufacturer EQs are a set of equalizations aimed at settling known behaviors: compensate low frequencies (loudspeakers coupling), air loss (long, medium, short throw). There are two categories (A, B) available: · Category A: selectable amount of boxes that make up the array to compensate loudspeaker coupling, providing the right contour for the system configuration. All the array elements shall operate with the same Manufacturer EQ; · Category B: selectable distance (meters) to be covered in order to compensate the loss of high frequencies level, due to air absorption. The array elements can operate with different Manufacturer EQ, according to the distance that every element (or group of elements) need to cover. Outline declines any responsibility (as well as expired warranty) in case of use with settings other than the official ones provided by Outline library, as these would involve risks for the sound system. 12 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 5. OPEN ARRAY 2 AND AIMING OpenArray is proprietary Outline software for 3D simulation of electro-acoustic events. A particular feature of OpenArray is its ability to predict direct field sound pressure distribution resulting from the interaction of different sound sources. Any configuration of an Outline line array system must necessarly be designed and mechanically verified with OpenArray2 simulation software. For a first approach to the software, a quickstart guide with a workflow example is provided on our website. OpenArray2 mechanical simulation takes into account normal environmental conditions. Elements such as strong wind, low or high temperatures, etc. require a higher safety factor. Assess, on a case-by-case basis, which measures to adopt, in relation to the risks specifically identified. Depicted here below an example of the mechanical report provided by Open Mechanics. All the details to properly install the system can be found in the "Superfly/Mantas 28 Rigging Manual". 13 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 6. MANTAS 28 DOWNFILL Superfly systems are designed to have a mediumlong throw, so their 90° horizontal directivity enables to concentrate the acoustic energy properly over long distances. On the other hand, for audience areas closer to the array, it may be necessary to use enclosures with wider horizontal directivity for correct sound reinforcement. Along with Superfly, Outline Mantas 28 shares the same mechanical hardware as Superfly (see Superfly/ Mantas 28 rigging manual"). Having a horizontal directivity of 120°, it can be used as downfill system without the use of adaptors. It is also suitable for medium-sized events as sidefill system. Mantas 28 is a two-way system equipped with two partially horn-loaded bandpass 8" woofers and a 3" diaphragm compression driver coupled with a D.P.R.W.G. waveguide. Further details on www.outline.it Angle [°] Octave Smooth: 1/3 +90 0 : -6 dB -6 : -12 dB +60 +30 +0 -30 -60 -90 200 500 1k 2k 5k 10k Frequency [Hz] Mantas28: horizontal isobar diagram < -12 dB 20k Angle [°] Octave Smooth: 1/3 +90 0 : -6 dB +60 +30 +0 -30 -60 -90 200 500 1k 2k 5k Frequency [Hz] Mantas28: vertical isobar diagram -6 : -12 dB 10k < -12 dB 20k 14 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 7. RAPID CHECKS : FASTQC-LS It is always advisable to carry out a check of the system's electroacoustic components, before every use, in order to ensure perfect operation. Outline created FASTQC-LS, a battery powered tool, so it can be used even without a power supply. FASTQC-LS was designed for simultaneously measuring the resistance of each Outline element with several sections. It features a NL4 and LK08 connectors. All the parameters for each enclosure are stored on board. For standard use, connect it to the element to be measured with a short cable (e.g. the link cable used to connect enclosures in parallel), select the preset corresponding () to the enclosure that needs be tested and press the "measure" button. The result is shown on the display and via the LEDs on the panel. If the measurement of each section is within the limit values, the result is positive. In case of negative result (the resistance is too high or too low, or there is a shortcircuit) the loudspeaker will have to be tested more thoroughly. For further details on its use, head to FASTQC-LS manual on www.outline.it 15 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 8. TECHNICAL SPECIFICATIONS PHYSICAL Component Low Component Midrange Component High Connectors Cabinet Material Cabinet Finish Grill Rigging Height Height (rigging included) Width Depth Weight 2 x 10" NdFeB double reflex band-pass loaded woofer 2 x 8" NdFeB partially horn loaded mid woofer 1 x 3" diaphragm NdFeB compression driver, DPRWG loaded 2 x LKI8 in parallel (8-pin, military grade) Baltic birch plywood Black polyurea coating Epoxy powder coated Integrated high-load aluminium hardware 239 mm - 9 3/8" 278 mm 11" 909 mm 35 3/4" 636 mm 25" 38 kg 83.8 lb PERFORMANCE SPECIFICATIONS Frequency Response -10 dB 50 Hz 20 kHz Horizontal Dispersion 90° Vertical Dispersion Array design dependent Splay Angles available (Degrees) from 0° to 7.5° in 0.5° step with additional 0.25° position Operating configuration Quad-amplified Impedance Low (Nom / Min) 2 x 16 / 2 x 14.4 Impedance Midrange (Nom / Min) 16 / 12.6 Impedance High (Nom / Min) 16 / 15.9 Watt AES Low (Continuous / Peak) 2 x 450 W / 2 x 1800 W Watt AES Midrange (Continuous / Peak) 400 W / 1600 W Watt AES High (Continuous / Peak) 120 W / 480 W Maximum SPL Output, one box * 143 dB SPL Maximum SPL Output, four boxes * 155 dB SPL * calculated using +10 dB Crest Factor signal @ 1 m, free field 16 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 9 3/8" 239 278 11" 9. OVERALL DIMENSIONS FRONT VIEW TOP VIEW 25" 635 907 35 3/4" SIDE VIEW 7.5° 419 16 1/2" 216 8 1/2" 17 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it 10. NOTES 18 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it NOTES 19 OUTLINE S.R.L. Via Leonardo da Vinci, 56 25020 Flero (Brescia) Italy Tel.: +39 030.3581341 Fax +39 030.3580431 info@outline.it www.outline.it Outline carries out on-going research for product improvement. New materials, manufacturing methods and design upgrades are introduced to existing products without prior notice as a routine result of this philosophy. For this reason, any current Outline product may differ in some aspect from its description, but will always equal or exceed the original design specifications unless otherwise stated. © Outline 2022 Operating manual product code: Z OMSUPERFLY Release: 20221007 Printed in Italy