Pyle PBMSPG3BK Bluetooth BoomBox Speaker System

Introduction

Please read this manual carefully before using your new device. Pyle is not responsible for consequences caused by misuse or oversight of this manual.

Key Features

• Portable Bluetooth Speaker
• Compact & Portable Stereo System
• Travel-Friendly Boom Box Speaker Style
• FM Radio
• Built-in Rechargeable Battery
• Full Range Stereo Sound Reproduction
• Ported Enclosure for Extended Bass
• MP3 Digital Audio File Playback
• Connect & Stream Audio from External Devices
• USB Flash & Micro SD Memory Card Readers
• Aux (3.5mm) Input Jack
• Built-in Digital Audio Amplifier
• Front Panel Button Audio Control Center
• Rugged & Durable Housing Design
• Home Speaker System for Indoor / Outdoor Use

Bluetooth Connectivity

• Built-in Bluetooth for Wireless Music Streaming
• Simple & Hassle-Free Pairing
• Works with Smartphones, Tablets, Laptops, Computers, etc.
• Bluetooth Version: 5.0
• Bluetooth Network Name: 'PyleUSA'
• Bluetooth Password (if prompted): '0000' (4 Zeros)
• Wireless Range: Up to 35'+ ft.

What's in the Box

• Portable Bluetooth Speaker
• USB Charging Cable
• Audio (3.5mm) Connection Cable
• Detachable Carry Strap

Technical Specifications

• Power Output: 8.5 Watt MAX
• Speaker Type: Portable Radio Boombox
• Sound System: 2.5” Tweeter Speaker
• Impedance: 4 Ohm
• Frequency Response: 120-12kHz
• S/N Ratio: 65dB, +/-2dB
• SPL: 89dB (1W/M)
• T.H.D.: <1%
• USB Interface Type: Micro, 2.0
• Digital Audio File Support: MP3, WMA
• Battery Life: Up to 2+ Hours
• Maximum USB/Micro SD Flash Memory Support: Up to 32GB
• Construction Material: Engineered LG, Metal Alloy
• Rechargeable Battery: 3.7V Li-iOn, 1500mAh - 5.55Wh - 41.5g
• USB Cable Length: 2.0' ft.
• Power Supply: USB, DC 5V
• Total Speaker Size (L x W x H): 9.8" x 3.6" x 4.1" inches

California Prop 65 Warning

WARNING: This product contains Cadmium (Cd) which is known to the state of California to cause cancer birth defects and other reproductive harm. Do not ingest.

For more info go to: www.P65warnings.ca.gov

Product Description and Controls

The speaker features a cylindrical design with a fabric grille and a control panel on the front.

Control Panel Layout:

• 1. USB Port: For connecting USB flash drives.
• 2. Micro SD Slot: For inserting Micro SD cards.
• 3. Charging Jack: Port for charging the device.
• 4. AUX IN: 3.5mm audio input for external devices.
• 5. Backward/Volume Down Button: Short press to go to the previous track; long press to decrease volume.
• 6. Mode Button: Switches between Wireless BT, USB disk, Micro SD, FM, and AUX-IN modes.
• 7. Power ON/OFF Button: Press and hold for 3 seconds to turn the unit on or off.
• 8. Play/Pause Button: Plays or pauses music. In FM mode, short press to auto-search channels. In TWS mode, press and hold for pairing/exiting.
• 9. Forward/Volume Up Button: Short press to go to the next track; long press to increase volume.

Operating Modes

Wireless BT Streaming

1. Turn the power button to "ON". The LED light turns blue and blinks quickly, indicating Wireless BT mode. A "Bluetooth Device Ready to Pair" tone will play.
2. Activate Wireless BT on your mobile phone and search for the device name "PyleUSA". Connect to it. The blue LED light will blink slowly, and a "Bluetooth Device Connected Successfully" tone will play.
3. Play music from your mobile phone.
4. Press the Forward or Backward button to select songs.
5. Press the Play/Pause button to play or pause music.
6. Press and hold the Forward or Backward button to adjust volume up or down, or to adjust the mobile phone's volume.

Playing Music from USB Disk & Micro SD Card

1. Turn the Power button to "ON".
2. Insert a Micro SD card or USB flash disk into the respective slot. The speaker will play a "Music Play Mode" tone and start playing stored music automatically.
3. Under playing mode, short press the Forward or Backward button to select songs; press and hold to adjust volume up and down.
4. Press Play/Pause to play or pause the music.

Remark: Inserting a Micro SD card or USB during Wireless BT playback will disconnect Bluetooth and switch to USB/Micro SD playback. Press the MODE button to return to Wireless BT mode.

FM Radio

1. In FM radio mode, the provided audio cable acts as the antenna. Insert the audio cable for the best FM signal.
2. Turn the power button to "ON," and press the “MODE” button. The speaker will prompt "The Radio Mode" when entering FM state.
3. Under playing mode, short press the “Play/Pause" button to auto-search and store FM channels.
4. Press the Forward or Backward button to change the stored FM channel.

TWS (True Wireless Stereo) Function

Pair two identical speakers for a stereo sound experience.

1. Turn on two identical speakers. Ensure they have the same Bluetooth pairing name and are in BT mode. Setup is only needed for one unit.
2. Press and hold the “PLAY/PAUSE" button for approximately 4 seconds. The speaker will make a "di" tone to start pairing and emit three "di" sounds upon successful pairing.
3. Connect Wireless BT with your mobile phone to play music through the two paired speakers for a more powerful surround sound effect.
4. To exit TWS mode, press and hold the "PLAY/PAUSE” button on the primary unit again.

Remark: If you connect your mobile phone via the provided audio cable in TWS mode, it will play AUX through the TWS function. In this state, the MODE button cannot switch to Wireless BT mode.

AUX-IN

For other compatible music devices or MP3/MP4 players, use the supplied audio line cable. Connect the device's "Line Out" to this device's "Aux In". Then, press the “MODE" button; the speaker will prompt "Aux Input Mode". Enjoy.

When using an external device, all functions are controlled by the external device.

General Remarks and Charging

General Remarks

• To turn the unit on, press and hold the Power button for 3 seconds.
• Press the MODE button to switch between modes: BT, USB disk, Micro SD, FM radio, and AUX-IN.
• When the speaker's Wireless BT is connected to one mobile device, press and hold the Mode button to disconnect the previous device and connect to another mobile device.
• The default volume is set at 50% of the maximum volume.
• When the battery voltage is low, the speaker will prompt "Battery Is Low, Please Recharge in Time."
• Turn the power button to “OFF” when not in use.

How to Charge

• The charger is not included. Use a Universal 5V/1A charger. Pyle is not responsible for damage caused by using a different charger.
• Power off the unit and insert the provided charging cable into the unit's charging slot. Connect the other end to a PC or a 5V charger.
• Charging time is 3-5 hours. The indicator light turns red while charging and turns off when fully charged. (When playing music during charging, keep the volume at medium, as heavy bass may strain the charger at maximum volume.)
• To prolong battery life, do not charge for more than 8 hours.

Register Product

Thank you for choosing PyleUSA. Registering your product ensures you receive the full benefits of exclusive warranty and personalized customer support.

Complete the form to access expert support and to keep your PyleUSA purchase in perfect condition.

Register at: PyleUSA.com/register

Questions or Comments?

We are here to help!

Phone: 1.718.535.1800

Contact us at: PyleUSA.com/ContactUs