Luxury Home & Kitchen Appliances | Fisher & Paykel USA
Installation Guide for FISHER PAYKEL models including: AAHP3DWDDSXP Professional Round Flush Handle, AAHP3DWDDSXP, Professional Round Flush Handle, Round Flush Handle, Flush Handle, Handle
Professional Round Flush Handle, 60cm | Fisher & Paykel Australia
File Info : application/pdf, 1 Pages, 656.63KB
DocumentDocumentINSTALLATION GUIDE Professional handles SAFETY & WARNINGS ! WARNING! Cut Hazard Failure to use caution could result in injury. · Take care: some edges may be sharp. z For products that are not front-mounted, installation must be carried out by a Fisher & Paykel trained and supported service technician. z Ensure all packaging is removed and disposed of responsibly. z Installation of this product requires basic mechanical skills. z Ensure product is installed with the correct tools to avoid personal injury or damage to the appliance. z Take care not to scratch the door with the supplied Hex key when tightening the screws. 1 COMPONENTS REQUIRED Supplied 2 Handle (1) M6x25mm pan head screw (2) M6x25mm countersunk 5mm hex key (1) screw (2) 3 Not supplied Powered driver Crosshead driver Tape measure Level For more information, visit www.fisherpaykel.com 432mm FITTING HANDLE TO PANEL Custom panel installations: Mark the handle location on the panel. Ensure distance between holes is 432mm. 4 Custom panel installations: Drill the holes using a 7mm drill bit. Counterbore from the rear. 5 Align handle to the holes. Secure handle by loosely tightening the screws using a crosshead driver. Do not overtighten. Custom and Dishwasher panels: Countersunk screw DishDrawer panels: Pan head screw Use a level to confirm the handle is aligned. Tighten using the supplied hex key. 431058A 10.22 NZ AU HK SG TW UK IE EU CN