User Manual for MAXSUN models including: TAIBM9382W0Y, MS-Q670, MS-Q670M Motherboard, Motherboard
TAIBM9382W0Y 6/15 Chapter 3: Introduction to Rear Panel Interfaces A：PS2 Interface Used for connecting PS2 devices, such as PS2 keyboards/PS2 mice. B：USB2.0 TYPE A Interface Used for connectingUSB2.0 TYPE A devices, backward compatible with USB1.1 standard.
File Info : application/pdf, 15 Pages, 1.99MB
DocumentDocumentTAIBM9382W0Y MS-Q670M vPro User Manual VER:A0 1 / 15 TAIBM9382W0Y Table of Contents Chapter 1: Mainboard Appearance Diagram.........3 Chapter 2: Mainboard Hardware Introduction.......4 Chapter 3: Introduction to Rear Panel Interfaces.......6 Chapter 4: Introduction to Mainboard Pins and Jumpers.......8 2 / 15 TAIBM9382W0Y Chapter 1: Mainboard Appearance Diagram (The images in this manual are for reference only; some details may be adjusted based on actual design. Please refer to the physical product, and our company reserves the right to interpret.) 3 / 15 TAIBM9382W0Y Chapter 2: Mainboard Hardware Introduction 2.1. Precautions Before Installation The mainboard is composed of many precision integrated circuits and components, which may be damaged by strong static electricity. Please read this user manual carefully and prepare as follows before installation: 2.1.1 Before installation, please confirm that the chassis/case structure you are using is compatible with the mainboard. 2.1.2 Please do not arbitrarily tear off the stickers on the mainboard, especially the serial number barcode stickers, as this will affect the product warranty. 2.1.3 Before performing any installation or removal of hardware, please be sure to turn off the power and ensure that it is disconnected. 2.1.4 When installing peripherals into the mainboard socket, please ensure that the peripherals are tightly connected to the mainboard socket. 2.1.5 When handling the mainboard, please try to avoid touching the metal connection parts to prevent short circuits. 2.1.6 When handling the mainboard, CPU, or memory modules and other precision electronic components, it is recommended to wear an anti-static wrist strap. If you do not have an anti-static wrist strap, please ensure your hands are dry and touch a metal object first to discharge static electricity. 2.1.7 Before turning on the power, please ensure that the output voltage of the power supply meets the standard values required by the mainboard. 2.1.8 Before turning on the power, please ensure that all hardware connections and power cables are correctly connected. 2.1.9 Do not place the mainboard in an environment with excessively high temperatures or humidity. 2.1.10 If you are not familiar with installing the mainboard or encounter any technical issues with this prod- uct, please consult a professional technician. 2.1.11 When using adapters, extension cords, or wires, please refer to the installation and grounding requirements for the corresponding devices. 2.2 Mainboard Hardware Specifications Mainboard Dimensions M-ATX 24.5*24.5cm CPU Support Chipset Memory Display Intel 12th/13th/14th Generation Official CPUs (see CPU support list), engineering sample CPUs are not supported. Intel Q670 Chipset 4 UDIMM DDR5 memory slots Supports up to 192GB (depending on CPU specifications) Supports dual-channel memory technology Supports memory frequency up to 4400MHz Display functionality based on processors with integrated graphics, using shared display memory technology 2 2 HDMI ports, supporting a maximum resolution of 4096x2160@60Hz 2 2 DP ports, supporting a maximum resolution of 4096x2160@60Hz Audio When a discrete graphics card is connected, the integrated graphics card is disabled by default, and the display output functionality is determined by the discrete graphics card IntegratedConexant CX20632 sound card chip Supports multiple sampling depths and rates Supports up to 5.1 channels 1 One rear MIC interface (pink), one rear AUDIO OUT interface (green), one rear LINE OUT interface (blue) 1 Network A set of front audio headers, supporting HD AUDIO Integrated with one Intel I210 network card chip (10/100/1000Mbit) Integrated with one Intel I226LM network card chip (10/100/1000/2500Mbit), supporting vPro 2 One onboard RJ45 interface Supports Wake-on-LAN Supports PXE boot without a disk 4 / 15 TAIBM9382W0Y Storage USB Onboard Socket Hardware Monitoring Operating System ESD Protection Special Features Operating Ambient Temperature Storage Ambient Temperature 2 One M.2 slot M2_SSD_A (near the CPU) supports 2280 NVME SSD (up to PCIE4.0 X4 lanes) M2_SSD_B (far from the CPU) supports 2280 SATA/NVME SSD (NVME up to PCIE3.0 X4 lanes SSD, SATA/NVME adaptive recognition) Four SATA3.0 interfaces Rear Ports: 2 USB 3.2 GEN1 (5Gbps) TYPE A Ports 2 USB 3.2 GEN2x1 (10Gbps) TYPE A Ports 2 USB 2.0 TYPE A Ports Onboard Pins: 1 set (1*9 Pin) USB 2.0 Pins (can expand to 2 USB Ports) 2 Set (1*19 Pin) USB 3.2 GEN2x1 (10Gbps) Pins (each set can expand to 2 USB Ports, can expand to a total of 4 USB Ports; to achieve 10Gbps speed, high-quality adapters are required) 1 USB 3.2 GEN2x1 (10Gbps) TYPE E Port 1 1 ATX 24-Pin Power Connector 1 8-Pin CPU power connector 1 CPU fan header 1 SYS fan header 1 TPM module header 1 CLR_CMOS header 1 CASE_OPEN header 1 Power switch indicator header (F_PANEL) 1 GPIO header 2 RS232 COM header 2 RS422/RS485 combo header 1 LPT header 1 M.2 wireless card interface (PCIE/CNVIo) 1 PCIE 5.0 X16 slot 1 PCIE 4.0 X4 slot (open-ended) 1 PCIE 3.0 X4 slot (closed-ended) 1 A PCIE 4.0 X4 slot (slot length is X16 slot) Voltage Monitoring Temperature Monitoring Fan Monitoring Smart Fan Control (Motherboard support is required, and the fan must also support smart fan control) Supports UEFI Windows 10/11 64bit Supports UEFI Ubuntu 64bit Supports UEFI UOS 64bit etc. (only supports UEFI mode systems) Air Discharge ±8KV Class B Contact Discharge ±6KV Class B Tested under the condition of good grounding for the entire machine Intel® vPro® Enterprise Ready -10 (non-condensing) to 45 -20 (non-condensing) to 60 5 / 15 TAIBM9382W0Y Chapter 3: Introduction to Rear Panel Interfaces A PS2 Interface Used for connecting PS2 devices, such as PS2 keyboards/PS2 mice. B USB2.0 TYPE A Interface Used for connectingUSB2.0 TYPE A devices, backward compatible with USB1.1 standard. C DP Interface Used for connecting DP display devices, supporting a maximum resolution of 4096x2160@60Hz. D HDMI Interface Used for connecting HDMI display devices, supporting a maximum resolution of 4096x2160@60Hz. E RJ45 Interface (1000Mbps) Network cable interface, used for connecting the main system to the network via a network cable, with a maximum bandwidth of 1000Mbps. Connection bandwidth indicator Operation indicator Bandwidth Light status No data transmission Off No connection 10Mbps 100Mbps 1000Mbps Off Off Solid green Solid orange Data transmission in progress Blinking F RJ45 Interface (2500Mbps) Network cable interface, used for connecting the main system to the network via a network cable, with a maximum bandwidth of 2500Mbps. Connection bandwidth indicator Operation indicator Bandwidth Light status No data transmission Off No connection 10Mbps 100Mbps 1000Mbps 2500Mbps Off Off Solid green Solid orange Solid orange Data transmission in progress Blinking 6 / 15 TAIBM9382W0Y G: USB3.2 GEN1 TYPE A port For connectingUSB TYPE A devices, with a maximum speed of USB3.2 GEN1 (5G), backward compatible with USB2.0/1.1 standards. H: USB3.2 GEN2x1 TYPE A port For connectingUSB TYPE A devices, with a maximum speed of USB3.2 GEN2x1 (10G), backward compatible with USB2.0/1.1 standards. I: Audio port For connecting audio output devices, such as headphones, speakers, and other external playback devices; 1 One rear MIC port (pink), one rear AUDIO OUT port (green), and one rear LINE OUT port (blue). 7 / 15 TAIBM9382W0Y Chapter 4: Introduction to Mainboard Pins and Jumpers 4.1, F_AUDIO Header The front audio header is used to connect front audio cables to support external audio devices, compliant with HD Audio specifications. Before installation, please confirm that the connector pin definitions match the header definitions, as improper installation may result in the device being unusable or damaged. Pin Number 1 3 5 7 9 Definition MIC2_L MIC2_R LINE2_R FRONT-IO LINE2_L Pin Number 2 4 6 8 10 Definition GND_AUD VCC3P3_S MIC2-JD KEY(No Pin) LINE2-JD 4.2, F_USB2 Header Used to connect USB2.0 header conversion cables to expand USB ports, supporting USB2.0/1.1 specifications . One set of 9 pins can be converted into 2 USB ports. 8 / 15 Pin Number 1 2 3 4 5 6 7 8 9 10 Definition 5V 5V DDD+ D+ GND GND KEY(No Pin) Pin(No signal) TAIBM9382W0Y 4.3, F_PANEL (Switch Control Indicator Pins) Used for connecting the power button, reset button, hard drive indicator light, and power indicator light. Pin Number 1 3 5 7 9 Definition HDD-LED+ HDD-LEDGND RESET NC Pin Number 2 4 6 8 10 Definition PWR-LED+ PWR-LEDPWR_SW GND NO PIN 4.4, CPU_FAN Pins Used to connect the CPU cooler fan wire, featuring smart fan control functionality (smart fan control also requires fan support). The socket has a foolproof design; please pay attention to the orientation of the plug during installation to avoid damaging the motherboard and fan. When installing into the chassis, please ensure that the airflow design of the case is reasonable to achieve optimal cooling performance, to prevent reduced processor performance due to poor heat dissipation. Pin Number 1 2 3 4 Definition GND +12VS/Voltage Speed Control RPM Detection PWM Speed Control 9 / 15 TAIBM9382W0Y 4.5, SATA Interface Used for connecting the hard disk SATA cable; the hard disk SATA cable can connect this socket to the hard disk data port to transfer data to the hard disk. Pin Number 1 2 3 4 5 6 7 Definition GND TXP TXN GND RXN RXP GND 4.6, CLR_CMOS Jumper Short the jumper to restore the BIOS settings to their default state; please ensure that the motherboard is powered off before performing this operation. 10 / 15 TAIBM9382W0Y 4.7, CASE_OPEN Jumper This function is disabled by default in the BIOS and must be manually enabled in the BIOS to work with the chassis alarm. When the jumper is open: CASE_OPEN function is disabled; when the motherboard is powered on and the chassis is opened, there will be no action from the motherboard. When the jumper is shorted: CASE_OPEN function is enabled; when the motherboard is powered on and the chassis is opened, the motherboard's buzzer will sound an alarm. Pin Status Open Circuit Short Circuit Definition Power on does not trigger CASE_OPEN Power on triggers CASE_OPEN 4.8,USB3.2 GEN2x1 Header Used to connect USB3.2 GEN2x1 header conversion cables to expand USB interfaces, supporting USB3.2 GEN2x1/2.0/1.1 standards. One set of 19 pins can be converted into 2 USB3.2 GEN2x1 interfaces. To achieve a 10Gbps speed, high-quality adapter cables are required. Pin Number 1 2 3 4 5 6 7 8 9 10 Definition VBUS SSRX1SSRX1+ GND SSTX1SSTX1+ GND D1D1+ NC Pin Number 11 12 13 14 15 16 17 18 19 20 Definition D2+ D2GND SSTX2+ SSTX2GND SSRX2+ SSRX2VBUS NONE 11 / 15 TAIBM9382W0Y 4.9,SYS_FAN Header Used to connect the system cooling fan cable. The socket has a foolproof design; please pay attention to the orientation of the plug during installation to avoid damaging the motherboard and the fan. When installing into the chassis, please ensure that the airflow design of the case is reasonable to achieve optimal cooling performance, so as to avoid reduced processor performance due to poor heat dissipation. 4.10, LPT Header Used for connecting LPT devices. Pin Number 1 2 3 4 Definition GND +12VS/Voltage Speed Control RPM Detection PWM Signal 12 / 15 Pin Number 1 3 5 7 9 11 13 15 17 19 21 23 25 Definition STB D0 D1 D2 D3 D4 D5 D6 D7 ACK BUSY PE SLCT Pin Number 2 4 6 8 10 12 14 16 18 20 22 24 26 Definition AFD ERR INIT SLIN GND GND GND GND GND GND GND GND N/A 4.11, COM Header Used for connecting RS232 interface devices. TAIBM9382W0Y Pin Number 2 4 6 8 10 Definition SIN DTR DSR CTS N/A Pin Number 1 3 5 7 9 Definition DCD SOUT GND RTS RI/PWR 4.12, COM1_9P_SET/COM2_9P_SET Interface Used to set the function of the 9th pin of COM1/COM2 header, default is RI, can be switched to 12V/5V. Pin Jumper Status 1-2 (default) 3-4 5-6 Definition RI 12V 5V 13 / 15 TAIBM9382W0Y 4.13, GPIO Header GPIO header, can define the pins as Input/Output, default configuration is Output, high level. Pin Number Definition Pin Number Definition 2 GND 1 5V 4 GPI4 3 GPO4 6 GPI3 5 GPO3 8 GPI2 7 GPO2 10 GPI1 9 GPO1 4.14, MULTI_COM Pin Header RS485 and RS422 Combined Pin Header. Effective only after setting the COM1_SET/COM2_SET function. Pin Number 2 4 6 Definition 422- 422+ GND Pin Number 1 3 5 Definition 485- 485+ 5V 14 / 15 TAIBM9382W0Y 4.15, COM1_SET/COM2_SET Pin Header Used to switch between the functions of the COM1/COM2 and MULTI_COM1/MULTI_COM2 pin headers: Default jumper cap is on 1-2, supporting RS232, enabling COM1/COM2 functionality, with MULTI_COM1/MULTI_COM2 having no function; Switching jumper cap to 3-4, MULTI_COM1/MULTI_COM2 set to RS485, with COM1/COM2 having no function; Switching jumper cap to 5-6, MULTI_COM1/MULTI_COM2 set to RS422, with COM1/COM2 having no function. 4.16, JTPM Pin Header Used to connect to the TPM module. Pin Jumper Status 1-2 (default) 3-4 5-6 Definition RS232 RS485 RS422 Pin Number Definition Pin Number Definition 2 +3.3V 1 NC 4 6 8 10 MOSI CLK WP# CS2# 3 5 7 9 MISO CS0# GND HOLD# 12 IRQ# 11 PLTRST 15 / 15Adobe PDF Library 15.0