Installation Guide for Sioux Chief models including: SIO520E24 Edge Support System Stub Out Bracket With Flat Tabs 1 8 in Hole Steel Galvanized, SIO520E24, Edge Support System Stub Out Bracket With Flat Tabs 1 8 in Hole Steel Galvanized, Flat Tabs 1 8 in Hole Steel Galvanized, Hole Steel Galvanized

Installation Guide

1 day ago —

17 ore fa — Then align tooth with hole in bracket. Install the clamp from the flat side. (face) of the bracket. Push thumb tab down and slightly.

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 2 Pages, 2.27MB

Document Document

Installation Guide

1

2

3

Position wide top lip over the back edge to hook onto bracket

Then align tooth with hole in bracket. Install the clamp from the flat side (face) of the bracket.

Use thumb and push wide lower lip onto bracket to engage the clamp.

4

5

6

Install CTS pipe or stub out into pipe hole opening.

Push thumb tab down and slightly forward to engage both edges of the bracket.

Completed installation.

pipe opening

thumb tab

tooth

wide lower lip

wide lower lip

narrow lower lip narrow top lip

Supply Drainage Support Specialties

Installation Guide Face of Stud

Inside Stud

Use screws or nails to secure bracket to either the front or inside of stud.
Narrow Stud Bays

Bend in both tabs to fit the bracket inside the stud bay.

For narrow stud bays, break perforation at the corner of the bracket to best fit the opening. CAUTION: Brackets have sharp edges. Wear gloves and use caution when installing the product.
Supply Drainage Support Specialties

#IS-520-E