User Guide for SmartAVI models including: HDX-POE-TX, HDX-POE-RX, HDX-POE HDMI IR and Power Extender Over Single CAT5, 5e 6 Cable, HDX-POE HDMI IR and Power Extender Over Single CAT5, 5e 6 Cable, Extender Over Single CAT5 5e 6 Cable
HDX-POE-RX - SmartAVI
Smart-AVI HDX-POES HDMI/IR/Power Extender with Power Source and Wall Mount - Up to 250 Feet Over Single CAT5/5e/6 Cable
File Info : application/pdf, 2 Pages, 414.56KB
DocumentDocumentTECHNICAL SPECIFICATION VIDEO Resolution 800X600, 1024X768 , 1280X1024, 1366X768, 1920X1200, 480i, 720p, 1080i, 1080p and 3D Transmission 70 meters Color Depth Deep Color 36/30/24 Bit at 1080p and 3D Audio Format Up to PCM 8 channel, Dolby Digital TrueHD, and DTS-HD Master Audio IR Range 38kHz, 56kHz Video Bandwidth 10.2Gbps Input Video Signal 1.2 Volts P-P Input DDC Signal 5 Volts(TTL) I/O CONNECTOR (TX) Input 1 x HDMI-A 19PIN Socket 5 x 2.5mm 1 x 3.5mm Jack for IR Receiver Output 1 x RJ45 Jack 1 x 3.5mm Jack for IR Emitter I/O CONNECTOR (RX) Input 1 x RJ45 Jack 1 x 3.5mm Jack for IR Receiver 5 x 2.5mm Output 1 x 3.5mm Jack for IR Emitter 1 x HDMI-A 19PIN Socket MECHANICAL Dimensions 0.9" H x 2.9" W x 3.7" D Weight 0.26 lb Power External 12V2.5A ENVIRONMENTAL Operating Temp. Storage Temp. Humidity SAFETY Certificate Power Adapter 32-104°F (0-40 °C) -4-140°F (-20-60 °C) Up to 85% (non-condensing) FCC, CE, RoHS UL, CE, FCC, RoHS WHAT'S IN THE BOX PART NO. Q-TY DESCRIPTION HDX-POE-TX 1 HDMI, IR, CAT5/5e/6 Transmitter HDX-POE-RX 1 HDMI, IR, CAT5/5e/6 Receiver Power Supply 2 PS5VDC2A Quick Start Guide 1 NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material. No part of this document may be photocopied, reproduced, or translated into another language without prior written consent from SmartAVI Technologies, Inc. 800.AVI.2131, 702.800.0005 2455 W Cheyenne Ave, Suite 112 North Las Vegas, NV 89032 SmartAVI.com HDX-POE HDMI, IR and Power Extender Over Single CAT5/5e/6 Cable WATCH AND CONTROL HDTV 1080P VIDEO UP TO 250FT FROM THE SOURCE VIA CAT5/5E/6 USING POE TECHNOLOGY Quick Start Guide OVEVIEW Are you extending your HD signal reach and finding that the best potential new locations don't have the proper power available? You may not have to scale down your plans if you consider using an HDX-POE system from SmartAVI. HDX-POE injects power into cat5/cat5e/cat6 cable that transports both HDMI and IR and picks it off at the load. FEATURES · Supports POE: Can be powered by TX or RX · Extends HDMI,IR and Power Output over one Cat5/5e/6 Cable · Extends IR Control Signals for Remote Control · Full HD support: 1080p@60Hz@48 bit/pixels, 1080p@120Hz@24 bit/pixels, 3D 1080P60Hz and 4K x 2K@30Hz@24bit · Data Signals up to 3.4Gbps · HDMI 1.4 and HDCP Compliance · Uses Bi-Directional IR Communication · Transmits High-Quality Dolby TrueHD, DTS-HD MA Audio Signals · Transmits 1080p Resolution Video up to 250 ft HARDWARE INSTALLATION 1. Power off the HDMI source and display. 2. Connect an HDMI cable from the HDMI source to the HDMI IN port of the HDX-POE transmitter. 3. Connect an IR emitter (optional) to the IR OUT port on the transmitter. 4. Connect the HDX-POE transmitter to the HDX-POE receiver using a CAT5e/6 cable (up to 150 ft). 5. Connect an IR receiver (optional) to the IR IN port on the receiver. 6. Connect an HDMI cable from the HDMI OUT port on the HDX-POE receiver to the HDMI Display. 7. Connect the power on the HDX-POE transmitter plugging in their power adapters (12VDC2A) or provide 12VDC input from the rear DC input port. NOTE: If the RX side has connected DC adapter, TX can get the DC power over the CAT5e/CAT6 cable, so leave DC input port empty. Only 1 power supply is required for both units. 8. Power on the HDMI source, displays and speakers. The RX will read the EDID from the monitor, and then pass the data into the TX automatically. HDMI IN HDMI OUT AUDIO IN AUDIO OUT IR CAT5/6 HDX-POE-TX 250 ft HDX-POE-RX HDX-POE-TX HDX-POE-RX