Liska SV-SW7 Smart Watch Instructions

1. Quick Start Instructions

1.1 Switch On and Off

ON: Press the side button for a long time.

OFF: Press the side button for a long time on the standby interface.

1.2 Standby Interface

Watch Dial Switch: Long touch the screen on the standby interface to pop up the watch dial preview interface. Swipe the screen left and right to switch the watch dial. Click OK to successfully set it.

Descriptions of icons in the drop-down status bar:

1.3 Charging

• Connect one end of the charging line to the watch, and the other end to a standard power socket.
• After inserting the charger, a "charger is connected" prompt will appear on the screen. The battery status icon in the drop-down status bar will scroll upwards, indicating that the watch is charging. When the battery is fully charged, the charging icon will stop scrolling, and the battery status icon will display full bars.
• After charging, disconnect the charger from the power supply outlet first, and then disconnect the watch from the charger.
• The watch battery can be charged by connecting the PC cable or DC power supply in a powered-on state. In this case, a "charging is complete" prompt will appear on the charging interface when the battery is fully charged. The watch battery can also be charged by connecting the PC cable or DC power supply in a powered-off state. In this case, the battery status icon on the charging interface will stop scrolling when the battery is fully charged. Press the POWER button to start the watch.
• While charging, the battery status icon in the status bar will continuously scroll until the battery is fully charged.

1.4 Suitable Models

• Android mobile phones: Support models with an operating system version of 4.4 or above.
• iPhone: Support models with an operating system version of 8.4 or above.

1.5 Bluetooth Connection

Downloading and Installation of FunDo APP

• Scan the built-in QR code on the watch or search for "FunDo" in the App Store, Google Play, or other mobile application marketplaces to download and install the FunDo APP.
• After the FunDo APP is installed, open FunDo. You will be prompted to allow access to read contacts, take photos, read messages, and location information. Please click OK. Enable the notification function as guided, which means approving the authorization for notification reading.

A. Pairing with Android Mobile Phones

• Turn on the Bluetooth switch on your smartphone. Enter the FunDo menu, select "More" (Figure 1) in the bottom right corner, click "+ Add device", and then click "Search" (Figure 2) to automatically search for nearby Bluetooth-enabled devices.
• Find the name of the watch and pair with it. After successful pairing, the Bluetooth icon in the drop-down menu will turn green (Figure 3). In this state, the watch and the mobile phone can search for each other (via watch - Search for my device (Figure 4)). The mobile phone terminal has vibration and ring modes. Click the Bluetooth connection (Figure 5) to connect to 4.0. After successful pairing, the Bluetooth icon will turn gradient blue-green (Figure 6).

B. Pairing with iPhone

• Turn on the Bluetooth switch on your smartphone. Enter the FunDo menu, select "More" (Figure 1) in the bottom right corner, click "+ Add device", and then click "Search" (Figure 2) to automatically search for nearby Bluetooth-enabled devices.
• Find the name of the watch and pair with it. After successful pairing, the Bluetooth icon in the status bar will turn green.
• The Bluetooth menu interface will display that a Bluetooth-enabled device has been successfully connected, as shown in the following figure.
• Click "Search for Bluetooth-enabled devices" on the watch to find the name of the mobile phone and pair with it. After successful pairing, the mobile phone Bluetooth menu interface will display that two Bluetooth-enabled devices have been successfully connected, as shown in the following figure.
• Under this circumstance, the Bluetooth icon in the watch status bar will turn gradient blue-green. The watch and the mobile phone can search for each other successfully (via watch - Search for my device, the mobile phone terminal will vibrate and ring; via mobile phone - Search for devices, the watch will vibrate and ring).

2. Dial

2.1 Making Calls

Enter the cell-phone number on the dial interface of the watch or mobile phone to make a call. A call box will pop up on the watch and mobile phone screen synchronously.

2.1 Answer or Rejection

When the call interface is displayed on the screen:

• Swipe ✅ to answer the call.
• Swipe ❌ to reject the call.

2.2 Menu During Bluetooth Call

During a Bluetooth call, the watch and mobile phone interfaces will display the call duration synchronously. Volume adjustment, dial use, mute, un-mute, and hanging up the phone can be operated via the watch.

• Click ? to start the mute function.
• Click ? to hang up.
• Click ? to start the dial function.
• Swipe the screen upwards and downwards to adjust the volume.

3. Call Records

Click on the watch to enter the call records to view all call records of the mobile phone's SIM card. Select any call-phone number to make a Bluetooth call.

Note: For iPhones with an operating system version of iOS 11 or above, contacts and call records can only be synchronized by enabling the contacts synchronization function in the Bluetooth Settings of the mobile phone. For iPhones with an operating system version of 11.3 or above, call records can only be synchronized normally by making a Bluetooth call.

4. Contacts

Click to enter the address book to check all contact numbers on the mobile phone terminal. Click any number to view and make a Bluetooth call. Select "Synchronize with the mobile phone" for real-time synchronization.

5. Message Notification

After successful Bluetooth pairing, the watch and mobile phone can search for each other. In this state, the watch can receive QQ messages, WeChat messages, incoming calls, and messages from the mobile phone terminal.

6. Sports

Sport modes include: walking, running, climbing, cycling, basketball, badminton, table tennis, football, settings, history.

6.1 Start the Exercise

Select the corresponding sport mode, click "Start" to directly enter the mode after a countdown of 3, 2, 1. Swipe the screen upwards and downwards to switch between interfaces for sport duration, calories, distance, stride frequency, pace, and heart rate.

6.2 End the Exercise

Click the screen on the sport data interface. Icons for ending or pausing the exercise will appear.

• Click ⏸️ to suspend exercise; click again to continue.
• Click ⏹️ to stop the current exercise. The exercise record will be displayed after the exercise ends. Swipe the screen upwards and downwards to view the relevant data. Click the screen again to bring up icons for deleting or saving records. Click ?️ to delete the exercise (the record will not be saved). Click ? to save the exercise (the record can be viewed in history).

After binding the watch to FunDo, click the "Synchronization" button in the FunDo sport history to synchronize the exercise history from the bracelet to the FunDo App. You can view the details via the app terminal.

7. Pedometer

Click to enter the pedometer menu - Option. Swipe the screen upwards to set personal information, then wear the bracelet. The step counting function is enabled by default. Swing your arms while walking; the pedometer will count your steps and calculate calories burned based on the total number of steps.

After data is generated, when the mobile phone pairs with the watch via Bluetooth and they can search for each other, click "Data Synchronization" on the mobile phone APK terminal to synchronize the steps from the watch terminal.

Recount Steps: Watch Settings -> Factory Data Reset -> Automatic Restart of the Watch.

8. Sleep Monitoring

Sleep monitoring is enabled automatically. The sleeping time is from 9:00 PM to 9:00 AM.

When the watch pairs with the mobile phone via Bluetooth, click "Data Synchronization" on the mobile phone APK terminal to synchronize sleep data from the watch terminal.

9. Heart Rate

Enter the heart rate menu. Place the front of the watch on your arm and click "Start". The watch will automatically measure your heart rate value. Swipe the screen downwards on the heart rate interface to view the history and help interfaces. The measuring result of the heart rate will be synchronized to the APP.

10. Blood Pressure

Enter the blood pressure menu. Place the front of the watch on your arm and click "Start". The watch will automatically measure your blood pressure value. The measuring result of the blood pressure will be synchronized to the APP.

11. Blood Oxygen

Enter the blood oxygen menu. Place the front of the watch on your arm and click "Start". The watch will automatically measure your blood oxygen value. The measuring result of the blood oxygen will be synchronized to the APP.

12. Camera Remote-Control

After the watch successfully pairs with the mobile phone via Bluetooth, and the mobile phone is unlocked with the screen on, and the FunDo APK camera function is enabled, click the remote camera on the watch to take photos. The photos will be saved on the phone.

13. Music Remote-Control

After the watch successfully pairs with the mobile phone via Bluetooth, enter the music menu. Click the Play button to play music saved on the mobile phone. Use the controls to decrease/increase volume, pause/resume, play the previous song, and play the next song.

14. Find My Phone

After the watch successfully pairs with the mobile phone via Bluetooth, click "Search for Device" on the watch. The mobile phone will vibrate and ring.

15. Sedentary Reminder

Click to enter the sedentary reminder menu. Set the reminder time period (in 30-minute intervals, from 0 min to 30 min). When the set time period expires, the watch will vibrate and ring to remind you to get up and do physical activity.

16. Alarm

You can set the alarm time, ring counts, ring tone, and reminder type as needed.

17. Stopwatch

Click the lower left button to start timing. Click the lower right button on the interface for continuous timing. The lower left button pauses timing. Swipe the screen upwards and downwards to view historical data. When the stopwatch is paused, click the lower right button again to clear the data.

18. Calculator

Enter the calculator menu. Click the soft keyboard to input data for calculation.

19. Calendar

View the current date. Click the round rose-red button to view the current calendar. Swipe the screen upwards and downwards to switch months.

20. Subject

Enable the subject function to select any subject to replace the old one. The menu icon and background of the watch can be changed.

21. Bluetooth Call

Watch Searches for Bluetooth of the Mobile Phone: Click "Search for Devices" via Bluetooth on the watch terminal. Select the Bluetooth name of the mobile phone you want to pair with, click "Pairing". The watch can pair with the mobile phone upon approval from both the watch and mobile phone terminals.

22. Settings

22.1 Bluetooth Settings

• If the watch fails to pair with the mobile phone via Bluetooth, switch the Bluetooth on/off in the watch settings.
• After the watch successfully pairs with the mobile phone via Bluetooth, the Bluetooth function cannot be turned off through the watch settings. You need to disconnect Bluetooth by clicking the Bluetooth search icon in the main menu of the watch, or directly disconnect Bluetooth on the phone.

22.2 About

View the Bluetooth name, device address, Bluetooth address, and software version number of the watch.

22.3 Power-Saving Mode

• When enabling power-saving mode, the backlight brightness will automatically be set to the minimum.
• When disabling power-saving mode, the backlight will restore to the brightness it had before enabling power-saving mode.

22.4 Watch Dial Switch

• Set up clock types. Once set up successfully, it will be displayed on the standby interface.
• You can turn off the automatic time synchronization function and set the time and time format manually.
• When automatic time synchronization is turned on, the watch will synchronize the time from the mobile phone in real-time after pairing with the mobile phone via Bluetooth.

22.5 Brighten Screen for Incoming Messages

• If the function to brighten the screen for incoming messages is turned off, the watch screen will not brighten when an incoming message is pushed to the watch terminal.
• If the function to brighten the screen for incoming messages is turned on, the watch screen will brighten when incoming messages are pushed to the watch terminal after successful pairing with the mobile phone.

22.6 Gesture

• Wake Up System by Gestures: When this function is turned on, tilt the watch to turn off the screen. Place the watch flatwise to turn on the screen. Turn the watch 90° towards you, and the screen will brighten in front of you.
• Shake Menu for Paging: When this function is turned on, shake the watch menu on the primary menu interface for paging.
• Answer Phone by Shaking Watch: When this function is turned on, shake the watch two or three times on the call interface to answer the phone.

22.7 Unit

You can set the display to metric or imperial units.

22.8 Ring Tone

• Set reminder types: ring, vibration, ring with vibration, vibration after ring, mute.
• Select ring tones.
• Select notification and tip rings.

22.9 Volume

Set the multimedia volume, ring tone volume, and notification tip ring volume.

22.10 Display

Set the screen brightness and backlight turn-off time.

22.11 Multi-Language Environment

• You can turn off the automatic synchronization function and set various languages.
• When the automatic synchronization function is turned on, the watch will use the same language as the mobile phone after pairing with the mobile phone (provided this language is available on the watch terminal).

22.12 Restore Factory Settings

Click "Restore Factory Settings" on the watch. All data generated from previous operations on the watch will be cleared after the watch automatically restarts, restoring it to factory settings.