IDEA Pro AudioBASSO36-A | IDEA Pro Audio
User Guide for IDea models including: BASSO36-A, Dual-18 Inch Multipurpose Touring Active Subwoofer, Touring Active Subwoofer, Dual-18 Inch Multipurpose Active Subwoofer, Active Subwoofer, Subwoofer
2 QS BASSO36-A EN v3.3 Enclosure design Bass Reflex Transducers 2 x 18'' Class D Amp Continuous Power 3.2 kW DSP 24bit @ 48kHz AD/DA 4 selectable active LPF cuts SPL (Continuous/Peak) 134/140 dB SPL Frequency Range (-10 dB) 33 - 100/125/150/180 Hz Frequency Range (-3 dB) 40 - 80/100/125/145 Hz Dimensions (WxHxD) 1200 x 600 x 740 mm (47.2 x 23.6 x 29.1 in) Weight 101 kg (222.7 lb)
2 QS BASSO36-A EN v3.3 Enclosure design Bass Reflex Transducers 2 x 18’’ Class D Amp Continuous Power 3.2 kW DSP 24bit @ 48kHz AD/DA 4 selectable active LPF cuts SPL (Continuous/Peak) 134/140 dB SPL Frequency Range (-10 dB) 33 - 100/125/150/180 Hz Frequency Range (-3 dB) 40 - 80/100/125/145 Hz Dimensions (WxHxD) 1200 x 600 x 740 mm (47.2 x 23.6 x 29.1 in) Weight 101 kg (222.7 lb)
File Info : application/pdf, 4 Pages, 2.67MB
DocumentDocumentBASSO36-A Dual-18" Multipurpose & Touring Active Subwoofer BASSO36-A is classic design dual 18 Direct Radiation subwoofer that meets all the expectations for this well-known industry standard solution for Touring and large venues and High-SPL applications. This active subwoofer features an integrated amp module capable of handling up to 3 Kw and provides a linear response typical of subwoofers from 36 Hz with both deep low frequency response and excellent impulse and transient definition. Thanks to a carefully designed and tuned cabined and eight symmetrical front-firing ports that allow for extremely linear excursion of woofers, maximizing their SPL response and minimizing mechanical noises and distortion. A high-end 24bit @ 48kHz AD/DA integrated DSP board allows for quick and precise adjustments thanks to advanced limiters and FIR filters and 4 selectable Set-up presets. Like All IDEA Loudspeakers BASSO36-A is built with the necessary structural strength and finish quality required for durable touring use. The high quality 18 mm birch plywood enclosure coated with IDEA Aquaforce custom paint solution and a 2-mm steel front grille. QuickStart Guide DSP AND POWER MODULE BASSO36-A features an integrated 3.2 kW Class-D power module equipped with PowerCON 32A Mains connectors and XLR balanced audio signal connectors allowing for a simple, straightforward power and audio linking of the array elements. Active Preset Preset Select toggle Gain level knob Activity leds PRESET 1 PRESET 2 PRESET 3 PRESET 4 PRESET SELECT LINK GAIN +6 - STATUS TEMP CLIP INPUT Signal OUT: balanced audio XLR USB Port Signal IN: balanced audio XLR Mains IN Mains OUT PRELOADED SELECTABLE PRESETS The 24-bit high-resolution integrated DSP board allows for easy access to four preloaded presets, just toggling the press-button PRESET SELECT in the back control pannel. The active preset will be indicated by the active led above its number. PRESET 1: LPF @100 Hz PRESET 2: LPF @125 Hz PRESET 3: LPF @150 Hz PRESET 4: LPF @180 Hz 1 QS_BASSO36-A_EN_v3.3 TECHNICAL DATA Enclosure design Transducers Class D Amp Continuous Power DSP SPL (Continuous/Peak) Frequency Range (-10 dB) Frequency Range (-3 dB) Dimensions (WxHxD) Weight Audio Signal Connectors Input Output AC Connectors Cabinet Construction Grille Finish Handles Feet/Skates Installation Accessories Bass Reflex 2 x 18'' 3.2 kW 24bit @ 48kHz AD/DA 4 selectable active LPF cuts 134/140 dB SPL 33 - 100/125/150/180 Hz 40 - 80/100/125/145 Hz 1200 x 600 x 740 mm (47.2 x 23.6 x 29.1 in) 101 kg (222.7 lb) XLR XLR 2 x Neutrik PowerCON® (I/O) 18 mm birch plywood 2 mm perforated weatherised steel with protective foam Durable IDEA proprietary Aquaforce paint coating process 4 integrated handles 4 Skates (V/H) 36 mm Pole mount socket (side) 35 mm Pole (K&M-21336) Wheels (WH-04) TECHNICAL DRAWINGS 365 mm 850 mm 1200 mm BASSO36-A 3 kW CLass-D Active Dual-18" Subwoofer ACTIVE PRESET 100 120 100 80 Cardioid LOW PASS CUT (Hz) PRESET SELECT Power supply: Universal regulated switch mode Nominal power requirement: 100-240 V 50-60 Hz Current consumption: 2.7 A GAIN +6 LINK - INPUT STATUS SIGNAL CLIP/TEMP PRODUCT OF EUROPE Made in Spain Designed, engineered and manufactured by IDEA in Cedeira (Galicia) 2 QS_BASSO36-A_EN_v3.3 WARNINGS AND SAFETY GUIDELINES · Read this document thoroughly, follow all safety warnings and keep it for future reference. ! · The exclamation mark inside a triangle indicates that whatever repairing and component replacement operations must be done by qualified and authorized personnel. · No user serviceable parts inside. · Only use accessories tested and approved by IDEA and supplied by the manufacturer or an authorized dealer. · Installations, rigging and suspension operations must be done by qualified personnel. · This is a Class I device. Do not remove Mains connector ground. · Only use accessories specified by IDEA, complying with maximum loads specifications and following local safety regulations. · Read the specifications and connection instructions before proceeding to connect the system and use only cabling supplied or rec- ommended by IDEA. Connection of the system should be done by qualified personnel. · Professional sound reinforcement systems can deliver high SPL levels that may result in hearing damage. Do not stand close to the system while in use. · Loudspeaker produce magnetic field even while they are not in use or even when disconnected. Do not place or expose loudspeakers to any device that is sensitive to magnetic fields such as television monitors or data storage magnetic material. · Keep the equipment in the safe working temperature range [0º-45º] at all times. · Disconnect the equipment during lightning storms and when it is not to be used for a long time. · Do not expose this device to rain or moisture. · Do not place any objects containing liquids, such as bottles or glasses, on the top of the unit. Do not splash liquids on the unit. · Clean with a wet cloth. Do not use solvent-based cleaners. · Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary. · Refer all servicing to qualified service personnel. · This symbol on the product indicates that this product should not be treated as household waste. Follow local regulation for recy- cling of electronic devices. · IDEA declines any responsibility from misuse that may result in malfunction or damage of the equipment. WARRANTY · All IDEA products are guaranteed against any manufacturing defect for a period of 5 years from date of purchase for acoustical parts and 2 years from date of purchase for electronic devices. · The guarantee excludes damage from incorrect use of the product. · Any guarantee repair, replacement and servicing must be exclusively done by the factory or any of authorized service centres. · Do not open or intend to repair the product; otherwise servicing and replacement will not be applicable for guarantee repair. · Return the damaged unit, at shipper's risk and freight prepaid, to the nearest service centre with a copy of the purchase invoice in order to claim guarantee service or replacement. DECLARATION OF CONFORMITY I MAS D Electroacústica SL Pol. A Trabe 19-20 15350 CEDEIRA (Galicia - Spain) Declares that: BASSO36-A Complies with the following EU Directives: RoHS (2002/95/CE) Restriction of Hazardous Substances LVD (2006/95/CE) Low Voltage Directive EMC (2004/108/CE) Electro-Magnetic Compatibility WEEE (2002/96/CE) Waste of Electric and Electronic Equipment EN 60065: 2002 Audio, video and similar electronic apparatus. Safety requirements. EN 55103-1: 1996 Electromagnetic compatibility: Emission EN 55103-2: 1996 Electromagnetic compatibility: Immunity QS_BASSO36-A_EN_v3.3 3 www.ideaproaudio.com QS_BASSO36-A_EN_v3.3 For further information scan the QR Code or refer to the following web address: www.ideaproaudio.com/product-detail/basso36-a IDEA is always in pursuit of better performance, greater reliability and design features. Technical specifications and minor finish details may vary without notice in order to improve our products. 4 ©2022 - I MAS D Electroacústica SL Pol. A Trabe 19-20 15350 Cedeira (Galicia Spain)