Televes Terminal Socket: TV/FM-SAT1-SAT2

Product Description

Terminal socket with three connectors and 2 inputs. It features two F connectors: the lower right SAT1 connector for the satellite signal of input 1 (filtered), and the upper SAT2 connector for the satellite and terrestrial signal of input 2 (covering the entire 5-2400MHz band). The lower left connector is an IEC male connector for radio (FM) and terrestrial TV, coming from input 1 of the socket. The lower part of the chassis is open.

Key Features

• High-cut separator filter between terrestrial and satellite signals: the SAT signal is filtered in the IEC FM/TV connector, while the terrestrial FM/TV signal is filtered in the F connector of the SAT1 satellite.
• Automated production using robotic lines.
• High shielding.
• Excellent isolation between outputs.
• Constructed from Zamak for high resistance.
• DC pass-through from the SAT connector to the input.
• Compatible with coaxial cable with sheath diameter of Ø 5-6.9mm.

Televes Sockets: Screwless Fixing

A Class A socket with numerous advantages:

• The cable core connects with a simple push, requiring no screw tightening, yet providing equivalent clamping force.
• Supports cable core diameters between 0.65 and 1.2 mm and an external cable diameter from 5 to 6.9 mm.
• Conical guide, F connector type, for easy insertion of the cable core.
• Ample margin in core length (from 5 to 15mm) to prevent shorts between the core and the braid.
• Swiveling and self-supporting clamp with full opening.
• The terminal is made of 3 rows of teeth, 9 mm long, for perfect braid fixing.
• Printed circuit board perforation to accommodate the fixing screw for the covers.
• Rounded edges to prevent cuts.
• Class A shielding.

Additionally, this product range features numerous markings on the chassis:

• CE marked.
• Numerical and logical reference.
• Input and output indications.
• Cable stripping dimensions.

Packaging Information

Physical Data

Technical Specifications