User Manual

Product Profile

The Switch Pro Controller is compatible with Switch/Lite/OLED and PC. It supports TURBO, wake-up function, 6-axis gyro, 3-level vibration, an 800mAh battery, and 7-color LED for ultimate control, making it perfect for Switch controller enthusiasts.

Product Diagram

The controller features the following components:

• [Type-C Port]
• [SYNC Button]
• [L/ZL Button]
• [+/- Button] / [Screen Shot Button] / [Turbo Button] / [HOME Button]
• [R/ZR Button]
• [Left 3D Joystick]
• [X Button], [A Button], [B Button], [Y Button]
• [D-pad]
• [Right 3D Joystick]
• [LED Indicator]
• [RGB Button] (located on the back)

Controller Mode & Operation

Platform Compatibility

Supports NS Switch, Windows (via Bluetooth [Bluetooth Icon] or Cable [Cable Icon]).

Nintendo Switch Mode

1. Step 1: Select "Controllers" on the HOME Menu. (Visual: Nintendo Switch HOME menu with "Controllers" highlighted.)
2. Step 2: Select "Change Grip/Order". (Visual: "Controllers" menu with "Change Grip/Order" selected.)
3. Step 3: Press the [SYNC Button] on the controller. The LED light will blink for 5-7 seconds until the controller is connected to the Switch. Press [L Button] + [R Button] on the controller to initiate pairing. (Visual: Controller pairing screen on Switch, showing instructions to press [L+R] and [SYNC Button], with the controller's LED blinking.)

Controller Functions

Controller Sleep/Wake-up Function

• Sleep: The controller will automatically enter sleep mode if there is no operation within 5 minutes.
• Wake-up: Pressing the [HOME Button] will power on the controller and reconnect it to the last connected device.

Adjust Vibration Intensity

• There are 3 levels of vibration intensity that can be set. The default level upon first power-up is moderate vibration.
• Press and hold the [L/ZL Button] or [R/ZR Button] for 3 seconds to cycle through the 3 levels of vibration intensity: "weakest", "moderate", "strongest".

LED Light Effect Control

• Single-click the [RGB Button] to cycle through solid colors: red, orange, yellow, green, cyan, blue, purple, or off.
• Double-click the [RGB Button] to cycle through dazzling color modes: 7-color gradient, single-color gradient, rainbow flow gradient, or off.
• Press and hold the [RGB Button] for 1 second to cycle through brightness levels: dim, medium, bright, super bright, or off.

Controller Shutdown Function

Press and hold the [HOME Button] for 5 seconds. The controller will power off with all LED lights off.

Turbo/Auto Function

The [A Button], [B Button], [X Button], [Y Button], [L Button], [ZL Button], [R Button], [ZR Button], [Left Joystick (L3)], and [Right Joystick (R3)] buttons can be set with the TURBO/AUTO function.

1. Enable TURBO/AUTO Function: Hold down the desired function button, then lightly press the [TURBO Button] to set the TURBO function.
2. Enable AUTO TURBO Function: Press the desired function button + [TURBO Button] again to activate the AUTO TURBO function.
3. Disable TURBO Function: Press the desired function button + [TURBO Button] 3 times to turn off the TURBO function.
4. Adjust TURBO Speed: Three speeds are available: 8, 15, or 25 times per second.
   • Initially, the speed is set to 15 times per second.
   • To adjust speed: Press and hold the [TURBO Button] and press the [D-pad Up] or [D-pad Down] button once.
5. Note on TURBO Function: After the controller enters sleep mode or is shut down and restarted, the previously set TURBO function is automatically cleared and must be reset if it is to be used again.

Controller Parameter Reference

After-sales Service

If there are any problems with your product, please contact the service team. The service is designed to be friendly and hassle-free.

FCC Statement

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.