DoC - LANCOM Systems GmbH
Manual-Hub.com - Free English product PDF Documents!
User Guide for LANCOM models including: WLC-4025 WLAN Controller With Central WLAN Management, WLC-4025, WLAN Controller With Central WLAN Management, Controller With Central WLAN Management, Central WLAN Management, WLAN Management
LANCOM WLC-4100 (01) PDF MANUAL - Manual-Hub.com
File Info : application/pdf, 1 Pages, 976.85KB
DocumentDocumentLANCOM WLC-4025+ LANCOM WLC-4100 Quick Reference Guide Power Fan COM WLAN New APs Lost APs CA VPN MOUNTING AND CONNECTING THE DEVICE Power Fan COM WLAN New APs Lost APs CA VPN Config ETH1 ETH2 ETH3 ETH4 USB LANCOM WLC-4025+ a b c d a LCD display (rotating in two lines) A Device name A Firmware version A Device temperature A Date and time A CPU load A Memory usage A Number of VPN tunnels A Data transfer in reception direction A Data transfer in transmission direction A Number of authenticated access points A Number of access points expected (actively configured) A Number of new discovered and not yet authenticated access points A Number of expected access points not present A SNTP status (when WLAN LED constantly red) A SCEP status (when WLAN LED constantly red) b Configuration interface Use the included serial configuration cable to connect the serial interface (COM) to the serial interface of the device you want to use for configuring / monitoring. c Ethernet interface Use the cable with the kiwi-colored connectors to connect one of the interfaces ETH1 to ETH4 to your PC or a LAN switch. d USB interface You can use the USB interface to connect a compatible USB cellular modem, a USB printer or a USB flash drive for device configuration. e Power switch and power connector (device back side) Supply power to the device via the supplied power cable. f Use the power switch to turn the device on or off. EF 4 Please observe the following when setting up the device A The mains plug of the device must be freely accessible. A For devices to be operated on the desktop, please attach the adhesive rubber footpads A Do not rest any objects on top of the device A Ensure that the ventilation slots at the back remain unobstructed A Mount the device into a 19" unit in a server cabinet using the provided screws and mounting brackets. 5 Unplug the power plug from the power socket to ensure that the device is completely separated from the power supply! https://manual-hub.com/ a bcdefgh a Power Off Device switched off Green, permanently Device operational Green / orange, blinking Configuration password not set. Without a password the device's configuration data is unprotected. Red, blinking Charge or time limit reached b Fan Green, permanently Orange, permanently Red, blinking CPU temperature OK CPU temperature > 55° Hardware failure of the fan or CPU temperature > 60°; additional acoustic signal c COM Off Green, permanently Orange, flickering No session logged on for the serial configuration interface Serial configuration session logged on Data transmission during the configuration session d WLAN Red, permanently Green, permanently Red, blinking The LANCOM WLAN controller is not yet operational; one of the following elements is missing: A Root certificate A Device certificate A Current time A Entropy for the DTLS encryption At least one active access point connected and authenticated. The device is operational but not connected to an active access point. Config ETH1 ETH2 ETH3 i e New APs Orange, blinking At least one new access point for authentication has been found. f Lost APs Red, blinking At least one expected access point has not been found. g CA Off Green, permanently Red, permanently Orange, permanently Internal CA switched off Internal CA switched on and ready Internal CA switched on; an error has occurred CA switched on and ready; request pending h VPN Off Green, permanently Green, blinking No VPN connection active VPN connection active Establishing VPN connections i ETH (one green and one yellow LED each) Green off No networking device attached Green, permanently Green, flickering Yellow off Yellow, permanently Connection to network device operational, no data traffic Data transmission 1000 Mbps 10 / 100 Mbps Hardware ETPHo4wer supply InternaUlSpBower supply unitL(A11N0C-2O3M0 VW, 5L0C--6400H2z5) Power consumption 30 W Environment Temperature range 5 40 °C; humidity 0-95 %; non-condensing Housing Robust metal housing, 19" 1U with mounting brackets, network connectors on the front Number of fans 1 Interfaces ETH USB Serial Interface 4 individual ports for 10 / 100 / 1000-Mbps Ethernet, Ethernet ports can be electrically disabled in the LCOS configuration. Each Ethernet port can be freely configured (LAN, WAN, monitor port, off). LAN ports operate in bridge mode or isolated. Additionally, external DSL modems or termination routers can be operated at the WAN port together with policy-based routing. USB 2.0 Hi-Speed host port for connecting USB printers (USB print server), serial devices (COM-port servers), USB data media (FAT file system), or supported mobile radio USB modems; bi-directional data transfer available. Serial configuration interface / COM port (8-pin Mini-DIN): 9,600 - 115,000 baud, suitable for optional connection of analog / GPRS modems. Supports the internal COM-port server. WAN protocols Ethernet PPPoE, Multi-PPPoE, ML-PPP, PPTP (PAC or PNS) and plain Ethernet (with or without DHCP), RIP-1, RIP-2, VLAN, IP Declaration of conformity Hereby, LANCOM Systems declares that this device is in compliance with Directives 2014/30/EU and 2014/35/EU. The full text of the EU declaration of conformity is available at the following internet address: www.lancom-systems.com/ce/ Package content Documentation Cables Mounting brackets Quick Reference Guide (DE/EN), Installation Guide (DE/EN), FCC Documentation 1 Ethernet cable 3 m (kiwi-colored connectors), 1 serial configuration cable 1.5 m, 1 IEC power cord Two 19" brackets for rack mounting LANCOM, LANCOM Systems and LCOS are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their owners. Subject to change without notice. No liability for technical errors and/or omissions. 111703/0118 TECHNICAL DATA