User Guide for TENTACLE SYNC models including: 002, 002 Multipurpose Timecode Display, Multipurpose Timecode Display, Timecode Display, Display

Timebar Manual (en)

Timebar Manual (en) - Tentacle Sync

26*$,45"35(6*%& 108&30/ 4ipsuqsftt108&3 5jnfcbstubsutvqxbjujohupcf tzodispoj[feczbqqpsfyufsobmujnfdpef-pohqsftt108&3 5jnfcbstubsutvqhfofsbujoh ujnfdpefxjui5jnfpg%bz ...

• Google Docs
• Google Drive
• Download [pdf]
• Download Optimized



File Info : application/pdf, 1 Pages, 46.96KB

Document Document

QUICK START GUIDE

3.5 mm Jack Timecode In/Out

POWER Button On/Off/Mode

USB-C Port Charging & Firmware Update

Bluetooth® Signal Strength

Frame Rate Flashing on First Frame
Button A
25

Light Sensor for Auto Brightness

Battery Status

Button B

POWER ON

POWER Short press

: Timebar starts up waiting to be

synchronized by app or external timecode

POWER Long press

: Timebar starts up generating

timecode with Time of Day (RTC)

POWER OFF

POWER Long press

: Timebar turns off

BRIGHTNESS
A B Press & at once: Enter Brightness Selection  A B Press or : Select Brightness Level (1­31/Auto)

BRIGHTNESS BOOST
A B Press & twice: Brightness Boost for 30 Seconds

 All these functions and other settings are also
accessible through the Tentacle Setup App

MODE

POWER Press

: Enter Mode Selection

 A B Press or : Browse Modes

POWER  Press

: Select Mode

TIMECODE
A: Show User Bits for 5 Seconds B: Hold Timecode for 5 Seconds

TIMER
A: Select one of 3 Timer Presets B: Start/Stop

STOPWATCH
A: Reset Stopwatch B: Start/Stop

MESSAGE
A: Select one of 3 Message Presets B: Start/Stop