User Guide for TECNO models including: AC8, 2ADYY-AC8, 2ADYYAC8, 8GB RAM 256GB ROM HD Screen Smartphone, AC8 8GB RAM 256GB ROM HD Screen Smartphone
TECNO MOBILE LIMITED AC8 Mobile Phone 2ADYY-AC8 2ADYYAC8 ac8
File Info : application/pdf, 9 Pages, 339.93KB
DocumentDocumentExplosion diagram specification 1 FL(CTP+LCM) 6.67FHD AC8 2 Heat con Copper Pipe 67.4* Black TM V1.0 10.9*0.6mm AC8 3 CTP Foam Glue 155.81* 4 LCM Buffer Foam 120.5 67.88*0.3 AC8 *59.8*0.3 AC8 5 Mi housing Heat Film 115.7* 6 FM(GW9658) AC8 fingerchip 55.28*0.07AC8 7 Card pinhole Seal plug AC8 8 Mi housing AC8 Iceland Blue 9 PCBA MB H853 A1 256GB+ 10 Side Key fixed frame AC8 8GB V1.1 11 Vol Key asm AC8 Iceland Blue 12 Power Key asm AC8 Iceland Blue 13 Card Holder asm AC8 Iceland 14 LT sensor Rubber AC8 Black Blue 15 F CAM fixed frame asm AC8 16 FPC REC AC8 Translucence 17 FPC Infrared focusing lens 18 R CAM con Rubber 50M 11* AC8 4.1 AC8 Black 19 Bat con Rubber 6.15*4.5 AC8 20 R CAM CONN Rubber 13M Black 10.2*4.7 AC8 Black 21 MAIN FPC con Rubber 13.1*5 22 Aj Rubber asm AC8 Black AC8 23 USB Rubber asm AC8 Black 24 Shield Seal Cop foil WIFI 6.1 *5.9 AC8 25 Infrared focusing lens Frame 26 F CAM con Rubber 9.7*4 AC8 Black 48M AC8 27 Shield Seal Cop foil BB 18.4 28 Side Key fixed Steel AC8 *17.6 AC8 29 SUB PCB con Rubber 13.3* 30 UP frame asm AC8 Black 10.16*AC8 Black 31 SPK 1712 H2.5 BOX 67*19 32 REC con Foams 8.6*4.3 AC8 H4.7 AC8 HS 33 R CAM Con fb 50M 21.4*16.3 34 Bat cover asm AC8 Iceland AC8 Blue 35 F CAM Cop foil 19.4*21.05 36 R CAM DecoMAIN con AC8 Foams2 3.35*1.9 AC8 37 R CAM Con fb 8M 12.6*10.45 38 R CAM Con fb 13M 12.9* AC8 10.75 AC8 39 R CAM DecoMAIN con Foams 40 Bat TECNO BL 44DT 4400 1 5.4*3.4 AC8 mAh ATL IN 41 F CAM Seal Foam 8M 42 F CAM Seal Foam 48M 5.8mm AC8 8.5mm AC8 43 R CAM FPC Con fb 50M 12*7 44 CPU radiating rubber AC8 AC8 45 mc screw M1.4*L2.5*D2.5* 46 machine screw M1.4*L3.5 H0.5 silver glue *D2.5*H0.5 black 47 R CAM Lens AC8 KN3 0.6mm 48 FPC MAIN AC8 Black 49 PCBA MB Radiating Film 50 PCBA SUB H853 1 A V1.1 59.45*56.55 AC8 51 FPC Side Key AC8 52 coaxial cable ECT S 162.8 AC8 RoHS 53 CAM AF 50M S5KGN1SP03 A 54 CAM FF 8M GC8034 A B B 7P B OF V1.0 5P+BG B TS V1.0 55 CAM FF 48M OV48B2Q A A 56 CAM AF 13M 3L6XX05 A A 6P+BG B ST V1.0 5PBG B SYX V1.0 57 CAM AF 8M GC8034-WC1X0 58 R CAM Deco asm AC8 A B 5P B TS V1.0 Iceland Blue 59 motor FPC 0827 L4.8 H AWA 60 PCBA SUB H853 FLASH 1 A with Con ads V1.1 61 R Infrared focusing lens 62 Waterproof label paper Rubber AC8Black 3mm RoHS Know your phone 1. Front camera 2. Volume key 3. Power key SIM/SD card installation 1. Power off mobile. 2. Refer to the following picture for SIM / SD card installation. Charging the phone You can charge your device using a charger or by connecting it to the computer using a USB cable (comes with the phone). 1. Please remind the front and back of the plug. 2. Use only TECNO charger and cables. Other chargers or cables may damage the device. This will invalidate your phone warranty. FCC Statement 1.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.` Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. SAR Information Statement Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radiofrequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. * Tests for SAR are conducted with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. Before a phone model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model phone when tested for use at the ear is 1.374W/Kg and when worn on the body, as described in this user guide, is 0.463W/Kg(Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). The maximum scaled SAR in hotspot mode is 0.695W/Kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model phone is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/ oet/fccid after searching on FCC ID: 2ADYY-AC8 Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Asso-ciation (CTIA) web-site at http://www.wow-com.com. * In the United States and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a sub-stantial margin of safety to give additional protection for the public and to account for any variations in measurements. Body-worn Operation This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved HiOS is based on AndroidTM Android is a trademark of Google LLC.