Kasa Smart Wi-Fi Power Strip, 6-Outlets HS300 User Guide

About This Guide

This guide provides a brief introduction to the Kasa Smart Wi-Fi Power Strip and the Kasa app, along with regulatory information. Please note that features may vary based on model, software version, location, language, and internet service provider. All images, parameters, and descriptions are for demonstration purposes only.

Conventions

In this guide, the following conventions are used:

• Teal Text: Key information, including management page text, menus, items, and buttons.
• Underlined Teal Text: Hyperlinks that redirect to websites.

More Info

• Specifications are available on the product page: https://www.tp-link.com
• Technical Support and troubleshooting information: https://www.tp-link.com/support

Introduction

The Kasa Smart Wi-Fi Power Strip, featuring independent control of 6 smart outlets and 3 always-on USB ports, is ideal for family rooms, home offices, and small businesses. The Kasa app allows for remote control and provides step-by-step installation instructions.

Key Features

• 6 Smart Outlets: Independently control 6 smart outlets via the Kasa Smart app.
• Surge Protection: ETL certified surge protection shields electronics from power surges and overloading.
• 3 USB Ports: Always-on USB ports for charging tablets, smartphones, and other devices.
• Energy Monitoring: Monitor energy consumption of devices connected to the smart power strip.
• No Hub Required: Connects directly to your existing Wi-Fi router.
• Scheduling: Set schedules to automatically turn devices on and off.
• Voice Control: Compatible with Alexa, Google Assistant, and Microsoft Cortana for voice commands.
• Works with IFTTT: Enables interactions with other devices through IFTTT support.

Supported Load Types:

Appearance

The Smart Power Strip has 6 individual smart outlets with control buttons and LEDs to indicate status. The SYS, Grounded, and Protected LEDs change color based on their status.

Device Overview

The device features 6 smart outlets labeled Plug 1 through Plug 6, three USB ports (5V/2.4A each, 5V/4A total), a SYS Wi-Fi LED, a Grounded LED, a Protected LED, individual outlet LEDs, control buttons for each outlet, and a main power switch on the back panel.

LED Indicators and Controls

Set Up Your Smart Power Strip

Follow these steps to set up your Smart Power Strip using the Kasa Smart app:

Step 1: Download and Install Kasa App

Go to Google Play or the Apple App Store. Alternatively, scan the QR code provided to download the Kasa app on your Android or iOS smartphone or tablet.

Step 2: Log In or Sign Up with TP-Link ID

Open the Kasa app. Log in using your TP-Link ID. If you do not have a TP-Link ID, tap "Create Account" and the app will guide you through the process.

Step 3: Add Device

In the Kasa app, tap the '+' button, select "Smart Power Strip", and follow the on-screen instructions to complete the setup.

Main Device Controls

After setup, the Kasa app's home page displays the status of all added devices. You can manage and control the 6 smart outlets of the HS300 from this page.

Home Page

The Home Page provides an overview of your connected Kasa devices, including the smart plugs (Fan, Night Light, Plug 3-6).

Device Status

Tapping on a specific smart outlet (e.g., "Night Light" for Plug 2) opens the Device Status screen, allowing you to control and manage that individual outlet.

Configure Your Smart Power Strip

From the Device Status page, you can configure various settings for your smart outlets, including schedules, Away Mode, timers, usage monitoring, and general device settings.

Set Schedule

Tap the [Schedule Icon] to set a schedule for your smart outlet, enabling automatic On/Off actions to simplify your daily routine.

Preset Away Mode

Tap the [Away Mode Icon] to preset the Away Mode. Your smart outlet will randomly turn on/off during the specified time to simulate occupancy.

Set Timer

Tap the [Timer Icon] to set a timer. Your smart outlet will automatically turn on/off after the specified time ends.

Check Usage

Tap the [Usage Icon] to view and track the energy consumption of your connected devices.

Device Settings

Tap the [Settings Icon] to view and change the settings of your smart outlet, including its name and icon.

Create Scenes

A scene is a preset group of smart devices that can be programmed, customized, and activated simultaneously with a single touch from your smartphone or tablet. Scenes allow you to easily set your mood, activity, or prepare for special occasions, enabling your smart home devices to act automatically.

Discover Kasa

Integrate your Kasa Smart Power Strip with Amazon Alexa, Google Home Assistant, or Microsoft Cortana for a hands-free experience. Kasa also works with Nest for home automation triggers and IFTTT for creating custom interactions between various products.

To set up these integrations, launch the Kasa app and navigate to Add Device > WORKS WITH KASA > Nest Home and Away / Amazon Alexa / Google Assistant / IFTTT for detailed instructions.

Authentication

Copyright & Trademarks

Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of these specifications may be reproduced or used to create derivative works without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP-Link Technologies Co., Ltd. All rights reserved.

Regulatory Compliance

FCC Compliance Information Statement

Product Name: Kasa Smart Wi-Fi Power Strip, 6-Outlet

Model Number: HS300

Responsible Party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc.

Address: 145 South State College Blvd. Suite 400, Brea, CA 92821

Website: http://www.tp-link.com/us/

Tel: +1 626 333 0234

Fax: +1 909 527 6803

E-mail: sales.usa@tp-link.com

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC RF Radiation Exposure Statement

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. TP-Link USA Corporation has determined that the equipment shown complies with applicable technical standards, FCC Part 15. No unauthorized changes have been made to the equipment, and it is properly maintained and operated. Issue Date: 2018.7.16

Regulatory Notices (Chinese)

NCC Notice: Regulatory notices regarding low-power radio-frequency devices, including restrictions on modification, interference, and compliance with aviation safety.

BSMI Notice: Safety precautions for product usage, including using the correct power adapter, cleaning instructions, avoiding moisture, ensuring proper ventilation, and not attempting self-repair.

Restricted Substances Table

The following table indicates the presence of restricted substances in product components:

Notes:

• "Above 0.1 wt %" and "Above 0.01 wt %" indicate that the percentage content of the restricted substance exceeds the threshold.
• "○" indicates that the percentage content of the restricted substance is below the threshold.
• "—" indicates that the restricted substance is an excluded item.

Safety Information

General Safety

• Keep the device away from water, fire, humidity, or hot environments.
• Do not attempt to disassemble, repair, or modify the device.
• Do not use the device where wireless devices are not allowed.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.

Please read and follow the above safety information when operating the device. TP-Link cannot guarantee that no accidents or damage will occur due to improper use. Please use this product with care and operate at your own risk.

CAUTION

• Do not install this device if there is not at least 10 meters (30 feet) or more of wire between the electrical outlet and the electrical service panel.
• To reduce the risk of electric shock - Use only indoors.
• Risk of electric shock. Do not plug into another relocatable power tap or an extension cord.
• Use only in dry locations.
• USB for charging IT Equipment Only.
• WARNING: Timer could turn on unexpected without the user being present. To reduce the hazardous condition - Unplug the appliance that is plugged into the receptacle(s) controlled by the timer before servicing.

Explanation of Symbols on the Product Label