Introduction
This manual provides instructions for the Rebel URZ0918-1 USB Rechargeable COB Work Lamp. Please read carefully before use and keep for future reference. The manufacturer is not liable for damages caused by improper handling or misuse. Follow general electrical appliance safety rules.
Lamp Components
- 1. Swivel hook: For hanging the lamp.
- 2. LED (top): A secondary LED light source.
- 3. COB (front): The main Chip-on-Board LED light source.
- 4. ON/OFF button: Controls the power and light modes.
- 5. Side handles: Ergonomic grips for holding the lamp.
- 6. Foot with magnet: A base with a magnet for attaching to metal surfaces.
- 7. Magnet: Additional magnetic attachment point.
- 8. Indication LED: Shows charging status (Red for charging, Green for fully charged).
- 9. USB-C charging port: For connecting the charging cable.
Operation
- Press the ON/OFF button to turn on the front light (COB).
- Press the ON/OFF button twice to turn off the front light and turn on the top LED.
- Press the ON/OFF button a third time to turn off the lamp completely.
How to Charge
Ensure the lamp is switched off before charging.
- Plug the USB-C end of the USB cable into the lamp's USB-C port.
- Connect the other end to an AC charger or a compatible PC USB port.
- The red LED indicator will be lit during charging.
- When the battery is fully charged, the green LED will illuminate.
- Disconnect the USB cable from the device and the power source.
Note: The battery may become slightly warm during charging. This is normal and does not affect the lamp's operation.
Maintenance
- Clean the lamp housing with a soft, slightly damp cloth.
- Do not use solvents or volatile chemicals for cleaning, as they can damage the plastic housing.
Precautions
- Turn off the lamp before charging and when not in use.
- Avoid damaging the transparent light cover and protect the product from drops.
- Use only the supplied charger.
- Warranty does not cover mechanical damage. Reduced battery operating time is not covered by warranty terms.
- Never cover the transparent light cover while the lamp is on.
- Do not point the light directly into eyes.
- Allow the lamp to cool down completely before cleaning.
- Charge the unit before first use.
- Efficiency may decrease if the lamp is used or charged at temperatures below 0°C or above 40°C.
- Handle and use the lamp according to these instructions.
- Keep the product away from water and other liquids.
- Repairs should only be performed by qualified service personnel.
Warning: To protect battery life, recharge the lantern when the light becomes dim.
Technical Specifications
- LED Light Quantity: 1 x COB (front) + 1 x LED (top)
- Luminous Flux: 220 lm (COB) + 60 lm (LED)
- Lighting Distance: Up to 20 m (COB) / 50 m (LED)
- Operation Time: Up to 3 h (COB) / Up to 6 h (top)
- LED Charging Indicator: Yes
- Power: 3 W (COB) / 1 W (LED)
- Rechargeable Battery: 3.7 V, 2000 mAh, Li-Ion
- Features: Hanging hook and 2 mounting magnets
- Handle: 360° swivel handle
- Foot: 180° foldable foot
- Charging Time: Max. 5 hours
- Operating Temperature: -20°C to +40°C
- Included in Set: USB-C cable, user manual
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
This marking on the product or its literature indicates it should not be disposed of with household waste at the end of its working life. To prevent potential harm to the environment or human health from uncontrolled waste disposal, please separate this from other waste types and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact their retailer or local government office for details on where and how to take this item for environmentally safe recycling. Business users should contact their supplier and check contract terms. This product should not be mixed with other commercial waste.
Distributed by Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne, Poland. serwis@lechpol.pl
Manufactured in China.