Introduction to Danfoss OptymaTM Packaged Condensing Units
Danfoss OptymaTM packaged condensing units are designed for high efficiency and reliability, catering to the needs of contractors and end-users. These plug-and-play solutions offer benefits such as simplified selection and installation, reduced maintenance time, compatibility with various lower GWP refrigerants, and cost savings due to microchannel condensers.
For end-users, these units contribute to higher food safety, longer product shelf life, quieter operation suitable for residential areas, and reduced life cycle costs for refrigeration equipment.
Key OptymaTM Series:
- OptymaTM Slim Pack: Compact and cost-effective, featuring microchannel condensers. Available in W05 and W09 versions. Suitable for A1 and A2L refrigerants.
- OptymaTM Plus: Cost-effective and efficient, with an electronic controller. Available in P00 and P02 versions. Suitable for A1 and A2L refrigerants.
- OptymaTM Plus INVERTER: Offers unmatched efficiency and high energy savings with a variable speed drive. Available in P01 version. Suitable for A2L refrigerants.
- OptymaTM iCO2: Specifically designed for CO2 (R744) refrigerant applications.
OptymaTM Slim Pack
The OptymaTM Slim Pack series is designed to be light on refrigerant impact while heavy on efficiency. It combines quiet operation, value for money, and an energy-efficient, compact solution.
Key Features:
- ✔️ Quick and Safe Installation: Upgraded for A2L refrigerants, ignition proof tested.
- ✔️ High SEPR: Exceeds EcoDesign 2018 thresholds for reduced energy costs.
- ✔️ Multi-Refrigerant Capability: Simplifies complexity and supports sustainable choices with A1 and A2L refrigerants.
- ✔️ Residential Area Suitability: Low sound levels, further reduced by fan-speed controllers.
- ✔️ Optimized Footprint: Slim design and low weight facilitate easy transport and installation, including wall mounting.
- ✔️ Micro-channel Heat Exchanger: Lightweight, easy to clean, and corrosion-resistant.
- ✔️ Robust Construction: IP54 rated, sealed electrical box, durable housing.
- ✔️ Serviceability: Accessible components, flare connections, dual pressure controls, crankcase heater.
Applications:
Cold rooms, display cabinets in convenience stores, mini-markets, restaurants, fisheries, butcheries, bakeries, florists, laboratories, wine cellars, milk cooling, industrial processes, dairy and general food storage.
OptymaTM Plus
The OptymaTM Plus series offers robust quality with enhanced technology and smarter design, providing quiet operation and top performance. It is designed for considerable energy savings, potentially up to 20% more economical than equivalent products.
Key Features:
- ✔️ Quick and Safe Installation: Similar to Slim Pack, upgraded for A2L refrigerants and ignition proof tested.
- ✔️ High SEPR: Exceeds EcoDesign 2018 thresholds.
- ✔️ Multi-Refrigerant Capability: Supports A1 and A2L refrigerants.
- ✔️ Superior Sound Performance: Achieved through long-life compressors, acoustic insulation, and intelligent fan speed reduction.
- ✔️ Connectivity: Enables energy savings and remote monitoring capabilities.
- ✔️ Stackable Design: Units can be stacked in the field, reducing installation time and costs.
- ✔️ Compact Cabinet: Facilitates maneuverability in tight spaces.
- ✔️ Double Door Design: Provides easier and quicker access to components for service.
- ✔️ Electronic Controller: Pre-programmed for various refrigerants, speeding up start-up and enhancing reliability.
- ✔️ P02 Version: Features liquid injection management for high glide refrigerants.
Applications:
Similar applications to OptymaTM Slim Pack, including cold rooms, display cabinets, convenience stores, mini-markets, restaurants, industrial processes, and food storage.
OptymaTM Plus INVERTER
This series offers unmatched efficiency and significant energy savings through its variable speed drive technology.
Key Features:
- ✔️ Variable Speed Drive: Adapts compressor speed to cooling demand, optimizing energy consumption.
- ✔️ High Energy Savings: Achieves substantial reductions in operational costs.
- ✔️ Enhanced Reliability: Variable speed operation can reduce stress on components.
- ✔️ Connectivity: Supports remote monitoring and integration into building management systems.
Suitable for applications requiring precise temperature control and maximum energy efficiency.
OptymaTM iCO2
This series is specifically designed for transcritical CO2 (R744) applications, offering a sustainable and efficient solution for low-temperature refrigeration.
Key Features:
- ✔️ R744 Refrigerant: Utilizes CO2, a natural refrigerant with zero ODP and low GWP.
- ✔️ Transcritical Operation: Optimized for CO2 systems.
- ✔️ High Efficiency: Designed for optimal performance with CO2.
Ideal for applications requiring low-temperature refrigeration and environmentally friendly solutions.
Performance Data and Technical Specifications
The catalogue provides extensive performance data tables for each OptymaTM series, detailing cooling capacity (Q) and Coefficient of Performance (COP) / Seasonal Energy Performance Ratio (SEPR) across various evaporating temperatures and ambient conditions. These tables cover a wide range of refrigerants including:
- R452A, R134a, R513A, R448A, R449A, R407A, R407F, R404A/R507, R744 (CO2), R454C, R455A, R1234yf.
Detailed technical data, dimensions, spare parts lists, and accessory information are also included for each model series.
For the most up-to-date and detailed performance capacities, please refer to Danfoss's Coolselector®2 software.
