Poly Studio Table Microphone Quick Start
Poly Studio Table Microphone
For Poly Studio X50, Poly Studio X52, Poly Studio X70, Poly Studio USB
Support & Downloads: poly.com/support/studio-x52/mic
Management Software
Poly Lens
Manage your device via Poly Lens: poly.com/lens
Contents
- Poly Studio Table Microphone (Model: 2200-87840-001)
- Audio RJ11 Cable
Setup Instructions
Step 1: Connect the Microphone
Connect the Poly Studio Table Microphone to your Poly Studio X device or Poly Studio USB using the provided Audio RJ11 cable. The cable connects from the microphone's audio port to the audio input port on the Poly Studio X device or computer.
Diagram Description: An illustration shows the Poly Studio Table Microphone with an RJ11 cable being plugged into its audio port. The other end of the cable is shown connecting to a port on a Poly Studio X device.
Optional: Extend Cable Length
If additional cable length is required, use the Cable Extender Kit (Part Number: 2215-88019-001). Connect the extender between the microphone's audio port and the main Audio RJ11 cable.
Diagram Description: An illustration shows the optional Cable Extender Kit. It depicts connecting the extender to the microphone's audio port and then connecting the main Audio RJ11 cable to the extender.
Additional Information
For further support and downloads, visit: www.poly.com/support/studio-x52
This product is recyclable where facilities exist. [Recycling Symbol]
© 2023 Poly. All trademarks are the property of their respective owners.
Document Part Number: 1725-88011-001C 02.23