ATTENTION
- Keep the hub away from water, fire, humidity, or hot environments.
- Do not drop or impact the hub heavily.
- Do not attempt to disassemble, modify, or fix the hub yourself. Doing so carries the risk of electric shock and voids the limited warranty. For service, please contact TP-Link.
- Disconnect the hub from the computer before cleaning. Do not use liquid cleaning methods.
- This hub can be powered only by CE certified computers that comply with Limited Power Source (LPS).
- For optimal performance, connected devices should not exceed a combined current of 4A.
- TP-Link is not responsible for any damage to disks or hard disk data caused by improper use.
COPYRIGHT & TRADEMARKS
Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are registered trademarks of their respective holders.
No part of these specifications may be reproduced in any form or by any means, or used to create derivative works such as translations, transformations, or adaptations, without prior permission from TP-Link Technologies Co., Ltd.
Copyright © 2017 TP-Link Technologies Co., Ltd. All rights reserved.
Visit TP-Link online: http://www.tp-link.com
FCC & CE Compliance
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
[FCC] [CE] [EAC]
Hardware Connection
Connect the devices as follows. The power LED will light up, indicating the hub is ready to use.
Diagram Description: A diagram illustrating the connection of the TP-Link USB 3.0 Hub (UH700) to a computer. It shows a USB 3.0 cable connecting the hub to a USB port on the computer. A power adapter is also shown connected to the hub and plugged into a power outlet. The power LED on the hub is indicated as lighting up.
Usage Tips:
- The TP-Link USB 3.0 hub is plug-and-play and requires no drivers for Windows, Mac OS X, or Linux systems.
- The hub automatically powers on every time the power adapter is plugged into a power outlet.
- The hub can transfer data even when the power adapter is unplugged. In this mode, the power button will not function as a power switch.
- To prevent potential data loss or corruption, avoid unplugging or plugging the power adapter while transferring data or charging.
Using the Hub
Transferring Data
This hub provides your computer with 7 additional USB 3.0 ports for super-speed USB 3.0 data transfer.
Diagram Description: A diagram showing the TP-Link UH700 hub with seven USB 3.0 ports. Examples of devices that can be connected are illustrated: a smartphone, a USB flash disk, a mobile hard disk, and a USB mouse.
Usage Tips:
- The USB 3.0 ports are also compatible with USB 2.0 and USB 1.1 specifications.
- The USB 3.0 ports transfer data at rates up to 5Gbps, but the actual rate is limited by the USB transfer speed of the connected devices.
- The performance of 2.4GHz wireless devices (wireless keyboards, mouses, etc.) may be affected when they are operating too close to USB 3.0 devices.
Charging
The three ports on the right side of the hub also provide a maximum current of 1.5A to quickly charge various mobile devices such as Android, Apple, and Windows products.
Diagram Description: A diagram showing the three dedicated charging ports on the right side of the TP-Link UH700 hub. Examples of devices that can be charged are illustrated: a smartphone and a tablet.
Usage Tips:
- If your device's current requirement is less than 1.5A, the charging port can automatically adjust the supplied current to your device to prevent damage.
Technical Support
For technical support, please contact TP-Link:
- Tel: +86 755 2650 4400
- E-mail: support@tp-link.com
- Web: http://www.tp-link.com/support
