Shelly Plus i4 User & Safety Guide
Brand: Shelly
Product Type: Smart Wi-Fi Switch Input
Introduction
The Shelly Plus i4 is an innovative microprocessor-managed device designed for remote control of electric appliances. It allows users to control devices via a mobile phone, tablet, PC, or home automation system. The Shelly Plus i4 can operate independently in a local Wi-Fi network or integrate with cloud home automation services. It offers remote access, control, and monitoring from any location with internet connectivity, provided the device is connected to a Wi-Fi router and the internet.
Shelly devices feature integrated web servers for direct user adjustment, control, and monitoring. Cloud functionality can be enabled via the device's web server or the Shelly Cloud mobile application. Users can register and access Shelly Cloud through Android or iOS mobile applications or any internet browser at https://my.shelly.cloud/.
Shelly devices support two Wi-Fi modes: Access Point (AP) and Client Mode (CM). For Client Mode, a Wi-Fi router must be within range. Devices can communicate directly with other Wi-Fi devices using the HTTP protocol. An API is provided by Allterco Robotics EOOD.
For more information, visit: https://shelly-api-docs.shelly.cloud/#shelly-family-overview
Voice Control Compatibility: Shelly devices are compatible with Amazon Echo and Google Home functionalities. Refer to the step-by-step guide at: https://shelly.cloud/support/compatibility/
Safety Precautions
⚠️ CAUTION! High voltage. Do not connect to the serial interface when the Shelly Plus i4 is powered.
⚠️ CAUTION! Danger of electrocution. Mounting/installation of the Device should be done by a qualified electrician.
⚠️ CAUTION! Connect the Device only as shown in these instructions. Any other method could cause damage and/or injury.
⚠️ CAUTION! Use the Device only in a power grid and with appliances that comply with all applicable regulations. Short circuits in the power grid or with connected appliances may damage the Device.
⚠️ CAUTION! Do not allow children to play with the button/switch connected to the Device. Keep Shelly remote control devices (mobile phones, tablets, PCs) away from children.
Wiring Diagram Description (Figure 1)
The diagram illustrates the terminal connections for the Shelly Plus i4. The device features the following terminals:
- N: Neutral terminal/wire
- L: Live (110-240V) terminal/wire
- SW1: Switch terminal for connecting a switch
- SW2: Switch terminal for connecting a switch
- SW3: Switch terminal for connecting a switch
- SW4: Switch terminal for connecting a switch
- ESP_DBG_UART: Debug UART interface
- U0TXD: UART Transmit Data
- U0RXD: UART Receive Data
- +3.3_ESP: Power supply for ESP chip
- RESET: Reset button/terminal
- GPIO0: General Purpose Input/Output
- GND: Ground terminal
Connection Instructions:
- Before starting, use a phase meter or multimeter to ensure that the circuit breakers are off and there is no voltage on the terminals and cables.
- Connect up to 4 switches to the "SW" terminals (SW1, SW2, SW3, SW4) of the Device.
- Connect the Live wire to the "L" terminal.
- Connect the Neutral wire to the "N" terminal.
⚠️ CAUTION! Do not insert multiple wires into a single terminal.
Recommendation: Connect the Device using solid single-core cables.
Initial Inclusion
You can choose to use Shelly Plus i4 with the Shelly Cloud mobile application and service. Instructions for connecting your device to the Cloud and controlling it via the Shelly App are available in the "App guide".
Alternatively, you can manage and control the device through its embedded web interface, accessible at 192.168.33.1 within the Wi-Fi network created by the Device.
Specifications
- Power supply: 110-240V, 50/60Hz AC
- Dimensions (HxWxD): 42x38x17 mm
- Working temperature: 0°C to 40°C
- Electrical consumption: < 1 W
- Multi-click support: Up to 12 possible actions (3 per button)
- Scripting (mjs): YES
- MQTT: YES
- URL Actions: 20
- CPU: ESP32
- Flash: 4MB
- Operational range: (depending on terrain and building structure): up to 50 m outdoors, up to 30 m indoors
- Radio signal power: 1 mW
- Radio protocol: WiFi 802.11 b/g/n
- Wi-Fi Frequency: 2412-2472 MHz; (Max. 2495 MHz)
- Bluetooth Frequency TX/RX: 2402- 2480 MHz (Max. 2483.5MHz)
- RF output Wi-Fi: <20 dBm
- RF output Bluetooth: <10 dBm
- Bluetooth: v.4.2
- Basic/EDR: YES
- Bluetooth modulation: GFSK, π/4-DQPSK, 8-DPSK
Declaration of Conformity
Hereby, Allterco Robotics EOOD declares that the radio equipment type Shelly Plus i4 is in compliance with Directive 2014/53/EU, 2014/35/EU, 2014/30/EU, 2011/65/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://shelly.cloud/knowledge-base/devices/shelly-plus-i4/
Manufacturer: Allterco Robotics EOOD
Address: Bulgaria, Sofia, 1407, 103 Cherni vrah Blvd.
Tel.: +359 2 988 7435
E-mail: support@shelly.cloud
Changes in contact data are published by the Manufacturer on the official website of the Device: https://www.shelly.cloud
All rights to the trademark Shelly®, and other intellectual rights associated with this Device belong to Allterco Robotics EOOD.
