Beautify 4000091 Storage Ottoman

Important Safety Information

Intended Use

This product is designed for indoor use only. It is not intended as a climbing structure or a toy. Adult supervision is required to ensure children do not play with the product.

General Safety Precautions

The assembly pack contains small parts that may pose a choking hazard to children and pets. Ensure the product is placed on solid and even ground. Use only in an upright, stable position. Do not overload the product to prevent damage or personal injury.

Before First Use

Follow each step of the assembly as outlined in this manual. Assemble the product close to its intended final position. Locate the product in a suitable area where it will not create an obstruction and away from sources of combustion.

Components

• A Storage Ottoman Body (x1)
• B Frame/Leg Assembly (x2)

Diagram shows the main ottoman body labeled 'A' and two frame/leg assemblies labeled 'B'.

Hardware

• 1 M6x35 Screws (x8)
• 2 Allen Key

Diagram shows one M6x35 screw labeled '1' and an Allen key labeled '2'.

Hardware Sizing Chart

The chart displays the dimensions of the hardware. Screw '1' (M6x35) is shown with a scale indicating its length.

Diagram shows a screw labeled '1' (M6x35) against a grid with millimeter markings from 10mm to 80mm, illustrating its size.

Assembly Instructions

Step 1: Attach Frame

Place the main ottoman body (A) upside down on a soft surface. Align one frame assembly (B) with the pre-drilled holes on the underside of the ottoman body. Insert and tighten M6x35 screws (1) using the Allen key (2). Repeat for the second frame assembly (B).

Diagram shows the ottoman body (A) upside down. An arrow indicates placing a frame (B) onto the underside. Close-up shows a screw (1) being inserted into a hole, secured by an Allen key (2). A checkmark ✔️ indicates correct assembly.

Step 2: Final Positioning

Carefully turn the assembled ottoman upright onto its legs. Ensure all legs are stable on the ground.

Diagram shows the ottoman being rotated from upside down to upright ?. A checkmark ✔️ indicates completion.

Cleaning & Maintenance

Do not use abrasive cloths or chemicals. Solvents or detergents can damage the surface. Periodically check and re-tighten fittings. Re-tighten all fittings after the first week of assembly. To clean, use a sponge with warm water, a soft cloth, and mild detergent. Ensure all listed components are present. If any parts are missing, contact customer services.

Disposal Information

Please recycle where facilities exist. Check with your local authority for recycling advice. ♻️

Customer Service & Warranty

If you are experiencing difficulties with this product or require support, please contact:

UK/EU: hello@domu.co.uk

US: usasupport@domubrands.com

To register your product and check for extended warranty eligibility, visit: www.beautify.co.uk/warranty. Retain your proof of purchase. The warranty applies only if the product is used as intended and all instructions are followed. Abuse or misuse will invalidate the warranty. Returned items must be in original packaging with a completed returns form. This does not affect your statutory rights.

Copyright

All material in this instruction manual is copyrighted by DOMU Brands. Unauthorized use may violate copyright, trademark, and other laws worldwide.