Sterling Ensemble Bath/Shower 71120120

Features

• 18" apron.
• Tongue-and-groove walls with snap-together installation.
• Tile look finish.
• Corner shelves.

Material

Constructed from solid Vikrell® material, providing strength, durability, and lasting beauty.

Installation

• Designed for alcove installation.
• Features a right-side drain.
• Some caulking is required for proper installation.

Recommended Products/Accessories

• K-23726 Drain treatment
• K-23733 Vikrell® cleaner

Included Components

• Product consists of: 71124100, 71121120

Codes and Standards

• CSA B45.5/IAPMO Z124
• ASTM E162
• ASTM E662
• HUD, UM Bulletin 73

Warranty

Warranty applies to Bathing Fixtures and Kitchen and Utility Sinks Made of Solid Vikrell® Material. Refer to the Sterling website for detailed warranty information.

Available Colors/Finishes

Color tiles are intended for reference only.

Technical Specifications and Dimensions

All product dimensions are nominal.

General Dimensions

• Overall Size: 60-1/4" x 32" bath/shower
• Maximum Door Height: 55-1/2" (1410 mm)
• Maximum Door Width: 57-11/16" (1465 mm)

Installation Details

• Installation Type: Three-wall alcove
• Drain Location: Right

Basin Dimensions

• Basin Area, Bottom: 42" x 20" (1067 mm x 508 mm)
• Basin Area, Top: 54" x 26" (1372 mm x 660 mm)

Water Information

• Water Depth: 13-3/4" (349 mm)
• Water Capacity: 55 gal (208.2 L)

Diagrammatic Information (Textual Description)

The product is a rectangular bath/shower unit designed for alcove installation. Key dimensions are provided for overall size, apron height (18"), wall height (54"), drain cutout, and various width/depth measurements for the basin and unit. The drain is located on the right side. A detail view shows the drain assembly.

Key Dimensions Summary:

• Overall Width: 60" (1524 mm)
• Overall Height: 75-1/4" (1911 mm)
• Apron Height: 18" (457 mm)
• Wall Height: 54" (1372 mm)
• Drain Diameter: 2" (51 mm)

Notes

• Install this product according to the installation instructions.
• Studs should be positioned roughly as shown in diagrams.
• Double studding is recommended for pivot shower door installations.