Beko Integrated Dishwasher Installation Guide

Step 1: Water Connection

Connect the water inlet hose to the water supply. Ensure a secure connection.

Diagram Description: Shows connecting the inlet hose to a water tap, with a maximum hose length of approximately 1500-2000mm. The water tap should be at a height between 300mm and 1000mm from the floor.

Diagram Description: Shows connecting the drain hose to the sink's waste pipe. The drain hose should not be higher than 1000mm from the floor.

Diagram Description: Illustrates connecting the water inlet hose to a 3/4" water tap connection. It shows a check for water pressure and flow rate.

Diagram Description: Shows the electrical plug and socket connection. Ensure the power supply meets the appliance's requirements.

Step 2: Cabinet Integration

Ensure the cabinet dimensions are suitable for the dishwasher. Refer to the diagram for specific measurements.

Diagram Description: Shows the dishwasher unit being placed into a cabinet opening. Minimum and maximum dimensions for the opening are provided: height 818-920mm, width 550-598mm, depth 560mm. The appliance weight is indicated as minimum 3kg, maximum 9kg.

Diagram Description: Illustrates adjusting the appliance's feet to ensure it is level and stable. The feet can be adjusted by +50mm.

Step 3: Securing the Appliance

Secure the dishwasher to the countertop or adjacent cabinets using the provided brackets and screws.

Diagram Description: Shows attaching mounting brackets (g) to the top of the dishwasher and then securing it to the underside of the countertop using screws (d).

Diagram Description: Shows attaching brackets (b) to the side of the dishwasher and securing it to the adjacent cabinet using screws (d).

Step 4: Attaching the Door Panel

Attach the decorative door panel to the front of the dishwasher.

Diagram Description: Shows attaching the door panel using brackets (b) and screws (d). The panel should be aligned correctly and secured firmly.

Diagram Description: Shows the process of attaching the door panel to the dishwasher's door hinges. Ensure the panel is centered and securely fastened.

Diagram Description: Illustrates adjusting the door panel for proper alignment and fit. Use screws (e) for final adjustments.

Step 5: Final Checks and Connections

Perform final checks on all connections and ensure the appliance is stable.

Diagram Description: Shows the final placement of the dishwasher within the cabinet. Ensure all hoses and cables are routed correctly and not kinked.

Diagram Description: Illustrates connecting the electrical supply and ensuring the power cord is safely routed.

Diagram Description: Shows the dishwasher being pushed into its final position. Ensure there is adequate clearance around the appliance.

Diagram Description: Shows the final securing of the dishwasher using screws (k) to attach it to the cabinet base or side panels.

Step 6: Width Adjustment and Alignment

Adjust the appliance width if necessary and align it with adjacent cabinets.

Diagram Description: Shows how to measure the cabinet width (w) and adjust the dishwasher accordingly. For cabinets wider than 610mm, specific mounting procedures apply. For cabinets between 600-610mm, different mounting brackets (b) and screws (d, e) are used.

Diagram Description: Illustrates attaching the decorative door panel to the dishwasher using brackets (b) and screws (d, e). The diagram shows different attachment points depending on the cabinet width.

Diagram Description: Shows the final attachment of the door panel using screws (e) and ensuring it is flush with the surrounding cabinetry.

Step 7: Final Securing of Door Panel

Ensure the door panel is securely attached and aligned.

Diagram Description: Shows the final securing of the door panel using screws (e). The diagram indicates checking for proper alignment and ensuring the panel does not interfere with the dishwasher's operation.

Diagram Description: Illustrates the final attachment of the door panel to the dishwasher's frame using screws (e). Ensure the panel is level and securely fastened.

Step 8: Final Alignment and Connections

Complete all final connections and ensure the dishwasher is properly aligned.

Diagram Description: Shows the dishwasher being connected to the cabinet using brackets (b) and screws (a, c). This ensures the appliance is stable and securely installed.

Diagram Description: Illustrates the final alignment of the dishwasher within the cabinet. Ensure all gaps are consistent and the appliance is flush with the surrounding units.