Destin Title Company | Emerald Coast Title Services
One moment, please...WARRANTY – Origin Effects
User Guide for ORIGIN EFFECTS models including: V2 Revival Drive Footswitch, V2, Revival Drive Footswitch, Drive Footswitch, Footswitch
Manuals – Origin Effects
This document contains important information for the safe operation of the product. Read and follow the safety instructions and all other guidance.
Revival Footswitch – Origin Effects
File Info : application/pdf, 6 Pages, 323.68KB
DocumentDocumentRevivalDRIVE Footswitch User Guide V2 RevivalDRIVE Footswitch User Guide www.origineffects.com ORIGIN EFFECTS is a trademark of Origin Effects Limited and is a registered trademark in the United States, United Kingdom, China and the EU. The ORIGIN EFFECTS Totem Device is a trade mark of Origin Effects Limited and is a registered trademark in the United States, China and United Kingdom. All other product names and trademarks are the property of their respective owners and are hereby acknowledged. No part of this publication may be reproduced in any form or by any means, whether mechanical or electronic, without the written permission of Origin Effects Limited. Origin Effects Limited reserves the right to change the features and specifications described herein without notice or obligation. Origin Effects Limited cannot be held responsible for any loss or damage arising directly or indirectly from any error or omission in this manual. © Origin Effects Limited 2024 Origin Effects LTD Unit 4, Top Angel, Buckingham, Buckinghamshire, MK18 1TH United Kingdom Page 2 of 6 RevivalDRIVE Footswitch User Guide Safety Notices: General Information: This document contains important information for the safe operation of the product. Read and follow the safety instructions and all other guidance. Our products and documentation are subject to a process of continuous development. They are therefore subject to change. Please refer to the latest version of the documentation, which is available on our website https://origineff ects.com/manuals/ Keep these instructions and heed all warnings. Do not use this apparatus near water. Clean only with a dry cloth. Do not install near any heat sources such as radiators, stoves or other apparatus (including amplifiers) that produce heat. Refer all servicing to qualified service personnel. ! NOTICE! Damage may be caused to the device should it be tampered with! No user-serviceable parts inside. In the event of damage to the unit, service or repair must be done by qualified service personnel only. Symbols and signal words: Signal Word DANGER! WARNING! NOTICE! Meaning This combination of symbol and signal word indicates a dangerous situation that could result in serious injury or even death if it is not avoided. This combination of symbol and signal word indicates a potentially dangerous situation that could result in serious injury or even death if it is not avoided. This combination of symbol and signal word indicates a potentially dangerous situation that could result in material and/or environmental damage if it is not avoided. Warning Symbol Meaning Warning - dangerous situation Page 3 of 6 RevivalDRIVE Footswitch User Guide Safety Instructions: Intended use: This device is intended for use as an external controller for the Origin Effects RevivalDrive pedal. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. Safety: DANGER! Risk of injury and choking hazard for children! Children can suffocate on packaging material and small parts. Never allow children to play with packaging material or the device. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervision. Keep small parts away from children and make sure that the device does not shed any small parts (such as knobs, rubber feet) that children could play with. ! NOTICE! Possible staining due from rubber feet! The plasticiser used in the manufacture of the rubber feet on this product may react with floor coatings and result in permanent dark stains after some time. If necessary, use a suitable mat to prevent direct contact between the device's rubber feet and the floor. Page 4 of 6 RevivalDRIVE Footswitch User Guide Connecting the Footswitch Using the TRS jack cable supplied, connect TRS socket on the Footswitch to the F/SWITCH socket on the RevivalDRIVE pedal. Note: Any standard TRS jack cable can be used in place of the supplied cable. The RevivalDRIVE Footswitch is compatible with RevivalDRIVE, RevivalDRIVE Custom, RevivalDRIVE Hot Rod and RevivalDRIVE Hot Rod Custom pedals. Using the Footswitch The RevivalDRIVE Footswitch allows additional control of the RevivalDRIVE's mid-boost and dry blend functions. MID-ENGAGE Setting the MID ASSIGN switch on the RevivalDRIVE to F/SWITCH, allows you to apply the adjustable mid-boost to whichever channel is currently selected. The mid-boost is applied to both the DRY and O.D. signals mixed by the BLEND control. The mid-boost function is not active when the pedal is in bypass mode. BLEND OVERRIDE This footswitch "overrides" each channel's BLEND control from the signal path. With the BLEND knob set for a mix of DRY and O.D. signals, engaging BLEND OVERRIDE effectively removes the DRY component and reverts to a 100% O.D. signal. This offers additional flexibility akin to having another channel on your amp. For example, with the channel controls set for medium gain and the BLEND knob at 12 o'clock, engaging the BLEND OVERRIDE footswitch lets you go from an organic clean tone with a little grit to a fully overdriven sound for aggressive rhythm playing. By carefully adjusting the DRY GAIN trimmer, you can control the change in volume up, down or unity gain that occurs when engaging BLEND OVERRIDE. As an alternative to the above example, you could set up your core drive tone with BLEND OVERRIDE engaged, then transition to a cleaner "edgy" solo tone of greater volume by disengaging BLEND OVERRIDE and turning the DRY GAIN control up. Page 5 of 6 RevivalDRIVE Footswitch User Guide Appendix A Physical Specification WEIGHT LENGTH WIDTH HEIGHT 400 g 165 mm 100 mm 80 mm BOXED 0.88 lb 6.4 inch 3.93 inch 3.14 inch UNBOXED 314 g 0.69 lb 115 mm 4.52 inch 47 mm 1.85 inch 55 mm 2.16 inch Appendix B Environmental information The crossed out wheely bin symbol indicates this product is classified as Waste Electrical and Electronic Equipment (WEEE) in the European Union and should not be discarded with household waste. Other territories may vary. Contact your local authority or Origin Effects for more information. The packing materials for this product are recyclable. Do not dispose of these materials with your normal household waste. Please refer to the symbols on the packaging for recycling information. Contact your local authority for further guidance on recycle in your region. Les matériaux d'emballage sont recyclables. Points de collecte sur www.quefairemesdechet.fr Privilégiez la réparation ou le don de votre appareil! Appendix C Warranty This product is covered by a 2-year manufacturer's warranty from the date of purchase. This applies only to original purchasers who have bought their product from an authorised Origin Effects dealer or directly from Origin Effects. All returns or servicing should be arranged through the original dealer. Proof of original ownership may be required in the form of a purchase receipt. For full warranty details visit www.origineffects.com/warranty Page 6 of 6