Product Data Sheet
Manual overload reset push button, Harmony XB5, red projecting, 22mm, for 17...120 mm actuation distance
Product ID: XB5AL84101
Product availability: Non-Stock - Not normally stocked in distribution facility
Main
| Range of Product | Harmony XB5 |
| Product or Component Type | Manual overload reset push-button |
| Device short name | XB5 |
| Bezel material | Dark grey plastic |
| Fixing collar material | Plastic |
| Head type | Standard |
| Mounting diameter | 0.9 in (22 mm) |
| Shape of signaling unit head | Round |
| Operator profile | Red projecting, O white |
| Activating distance | 0.7...4.7 in (17...120 mm) |
| Device presentation | Complete product |
Complementary
| Height | 1.1 in (29 mm) |
| Width | 1.1 in (29 mm) |
| Depth | 4.7 in (120 mm) |
| Net Weight | 0.060 lb(US) (0.027 kg) |
| Resistance to high pressure washer | 1015.3 psi (7000000 Pa) at 131 °F (55 °C) at 0.1 m |
| Operating travel | 0.4 in (10 mm) |
Environment
| Protective treatment | TH |
| Ambient Air Temperature for Storage | -40...158 °F (-40...70 °C) |
| Ambient Air Temperature for Operation | -40...158 °F (-40...70 °C) |
| Electrical shock protection class | Class II conforming to IEC 60536 |
| IP degree of protection | IP66 IEC 60529 |
| NEMA degree of protection | NEMA 4X |
| IK degree of protection | IK03 conforming to IEC 50102 |
| Standards | IEC 60947-1 |
| Product Certifications | UL Listed |
Ordering and shipping details
| Category | US10CS222467 |
| Discount Schedule | 0CS2 |
| GTIN | 3389110102499 |
| Returnability | No |
| Country of origin | MX |
Packing Units
Package 1
| Unit Type | PCE |
| Number of Units | 1 |
| Height | 1.77 in (4.500 cm) |
| Width | 2.17 in (5.500 cm) |
| Length | 5.28 in (13.400 cm) |
| Weight | 1.376 oz (39.000 g) |
Package 2
| Unit Type | S03 |
| Number of Units | 80 |
| Height | 11.81 in (30.000 cm) |
| Width | 11.81 in (30.000 cm) |
| Length | 15.75 in (40.000 cm) |
| Weight | 7.970 lb(US) (3.615 kg) |
Contractual warranty
| Warranty | 18 months |
Environmental Data
Schneider Electric aims to achieve Net Zero status by 2050 through supply chain partnerships, lower impact materials, and circularity via its ongoing "Use Better, Use Longer, Use Again" campaign to extend product lifetimes and recyclability.
Environmental footprint
| Carbon footprint (kg CO2 eq, Total Life cycle) | 1 |
| Environmental Disclosure | Product Environmental Profile |
Materials and Substances
| Packaging made with recycled cardboard | Yes |
| Packaging without single use plastic | Yes |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| REACH Regulation | REACH Declaration |
| California proposition 65 | WARNING: This product can expose you to chemicals including: Di-isodecyl phthalate (DIDP), which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov |
Repack and remanufacture
| Circularity Profile | End of Life Information |
| Take-back | No |
| WEEE | The product must be disposed of in European Union markets following specific waste collection and never end up in rubbish bins. |
Dimensions Drawings
Dimensions
Diagram: Side and front view of the push button with dimensions labeled.
Clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.
Actuation distance: see table below
| Actuation distance in mm | Actuation distance in in. | |
| XB5AL801 | 41 to 150 | 1.61 to 5.91 |
| XB5AL802 | 150 to 260 | 5.91 to 10.24 |
Mounting and Clearance
Panel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Diagram: Shows four circular cut-outs for mounting, with dimensions labeled 'a min' and 'b min'.
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
| Connections | a in mm | a in in. | b in mm | b in in. |
| By screw clamp terminals or plug-in connector | 40 | 1.57 | 30 | 1.18 |
| By Faston connectors | 45 | 1.77 | 32 | 1.26 |
| On printed circuit board | 30 | 1.18 | 30 | 1.18 |
Detail of Lug Recess
Diagram: Shows a detail of a lug recess with dimensions labeled in mm and inches.
(1) Diameter on finished panel or support
(2) For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.
(3) Ø22.5 mm recommended (Ø22.30 +0.4) / Ø0.89 in. recommended (Ø0.88 in. +0.016)
