Thundercomm TurboX C865 Development Kit User Guide

User Guide for Thundercomm models including: TurboX C865 Development Kit, TurboX C865, TurboX Development Kit, C865 Development Kit, Development Kit, TurboX C865 Kit, C865 Kit

杨潇

Quick Start >

Welcome — Welcome to TurboX ation System

File Info : application/pdf, 6 Pages, 950.31KB

[tc-a-2110] TurboX C865 DK Quick Start Guide V1.0

Thundercomm TurboX C865 Development Kit
Quick Start Guide
Rev. V1.0 DN: tc-a-2110

Package List

C865 SOM

Main IO Board

Navigation Mezzanine Board

12V/2.5A AC Power Adaptor

Main Camera IMX577 Module Kit Tracking Camera OV9282 Module Kit
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.

Speaker (x2)

Main IO Board Interface List

1. Type-A USB 3.0 connector 2. User LEDs 3. Type-A USB 3.0 connector 4. BT/Wi-Fi LEDs 5. Type-C USB 3.1 connector 6. HS1 high speed connector 7. HS3 High Speed connector 8. HDMI connector 9. Ethernet connector 10. LS1 low speed connector

11. LS2 low speed connector 12. LS2 low speed connector 13. HS2 high speed connector 14. NA 15. DC jack 16. Micro SD card slot 17. Dip Switch#1 18. Dip Switch#2 19. Volume up button 20. Volume down button

21. Power on button 22. USB 2.0 debug connector 23. Force USB connector 24. Wi-Fi Ch1 on-board antenna 25. Wi-Fi Ch1 RF receptacle 26. GAN connector 27. B2B connector for C865 SOM 28. Wi-Fi Ch0 RF receptacle 29. Wi-Fi Ch0 on-board antenna -

Navigation Mezzanine Board Interface List

Table 2-1. Navigation mezzanine interface list

Figure 2-1.Navigation Mezzanine Top & Bottom View

1. GMSL1 connector 2. GMSL2 connector 3. MIC2 sound pickup hole 4. Pressure sensor 5. Compass sensor 6. HS1 connector * 7. HS2 connector 8. HS3 connector 9. LS3 connector 10. LS2 connector 11. LS3 connector

12. MIC1 sound pickup hole 13. Speaker connector 2 14. Speaker connector 1 15. CAM0B connector 16. MIC4 sound pickup hole 17. CAM0A connector 18. Cam1 connector 19. Cam2 connector 20. DIP switch 2 21. DIP switch 1 22. CAM3 connector

* LS/HS mate connectors on navigation mezzanine goes to main IO LS/HS connectors

23. MIC3 sound pickup hole 24. A+G IMU sensor 25. HS1 mate connector 26. HS2 mate connector 27. HS3 mate connector 28. Cam4 connector 29. LS1 mate connector 30. LS2 mate connector 31. LS3 mate connector 32. Display connector 33. CAM5 connector

Let's Get Started
Follow the steps below to boot up your device.
1. Remove C865 DK board carefully from the package. 2. Connect the power adapter to the board via DC jack (connector 15 on
Main IO Board). 3. Connect the board assembly to a computer via
Type-C USB 3.1 connector (connector 5 on Main IO Board) if adb tool is needed.
USB 2.0 debug connector (connector 22 on Main IO Board) if debug function is needed.
4. Press Power on button (connector 21 on Main IO Board) for three seconds to boot up the device.
Copyright© 2022 Thundercomm Technology Co., Ltd. All rights reserved.

Contact us
Email: service@thundercomm.com
Address: 1601 McCarthy Blvd Suite R-12 Milpitas CA,95035
Support software and documentation downloads: www.thundercomm.com
Notices and trademarks
Thundercomm may have patents or pending patent programs covering subject matter described in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries to service@thundercomm.com. THUNDERCOMM PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of express or implied warranties in certain transactions; therefore, this statement may not apply to you. Changes are made periodically to the information herein; these changes will be incorporated in new editions of the publication. To provide better service, Thundercomm reserves the right to improve and/or modify the products and software programs described in the manuals, and the content of the manual, at any time without additional notice. The software interface and function and hardware configuration described in the manuals included with your development board or system on module might not match exactly the actual configuration of that you have purchased. For the configuration of the product, refer to the related contract (if any) or product packing list, or consult the distributor for the product sales. Thundercomm may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. The products described in this document are not intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Thundercomm product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Thundercomm or third parties. All information contained in this document was obtained in specific environments and is presented as an illustration. The result obtained in other operating environments may vary.

The information of this document should not be as any invitation for offer or any advice to the visitors. Please consult the professional comments from the sales consultant prior to do any actions of investment or purchase. Thundercomm may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Any references in this publication to non-Thundercomm Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Thundercomm product, and use of those Web sites is at your own risk. Thundercomm shall not be responsible for the content of the third party. Any performance data contained herein was determined in a controlled environment. Therefore, the result obtained in other operating environments may vary significantly. Some measurements may have been made on developmentlevel systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. This document is copyrighted by Thundercomm and the property right of the date mentioned in this document, including but not limited trademarks, patents, copyrights, trade name etc. is/are not covered by any open-source license. Thundercomm may update this document at any time without notice. Anyone doesn't have the right to amend, reprint, republication, reproduce, transmit, distribute or any other way to use this document in business or public purpose without the prior written consent by Thundercomm. E-mail messages sent to Thundercomm via the Internet are not guaranteed to be completely secure. Thundercomm shall not be liable for any loss incurred by the surfer when transmitting any information over the Internet or for any loss incurred by Thundercomm when sending any information over the Internet at your request. Thundercomm has all rights under other relevant exemptions provided by laws and regulations, and Thundercomm's failure to claim or delay in claiming such rights shall not be deemed to be a waiver of such rights by Thundercomm. Thundercomm reserves the right of final interpretation of this document. Thundercomm, Thundercomm Turbox, TURBOX, Thundersoft turbox are trademarks of Thundercomm Corporation or its associate companies in China and/or other countries. All other trademarks are the property of their respective owners.

References

Microsoft Word LTSC