Product Liability Disclaimer-MEAN WELL Switching Power Supply ManufacturerGlobal Trade Item Number (GTIN)-MEAN WELL Switching Power Supply Manufacturer
Installation Guide for MEAN WELL models including: RS-15-SPEC.pdf, RS-15-20240506.cdr, RS-15 Series LED Displays Power Supply, RS-15 Series, LED Displays Power Supply, Displays Power Supply, Power Supply, Supply
6 mag 2024 — User's Manual https://www.meanwell.com/serviceGTIN.aspx. MW Search: □ GTIN CODE. 4914.9K hrs min. Telcordia SR-332 (Bellcore) ; 1608.9K hrs min. MIL-HDBK ...
Index of /pdf
File Info : application/pdf, 2 Pages, 113.90KB
DocumentDocument15W Single Output Switching Power Supply RS-15 series Features : Universal AC input / Full range Protections: Short circuit / Overload / Over voltage / Over temperature Cooling by free air convection LED indicator for power on 100% full load burn-in test No load power consumption<0.5W All using 105 long life electrolytic capacitors User's Manual Withstand 300VAC surge input for 5 second High operating temperature up to 70 GTIN CODE MW Search: https://www.meanwell.com/serviceGTIN.aspx SPECIFICATION Withstand 5G vibration test High efficiency, long life and high reliability 3 years warranty THOMAS SAMUEL THOMAS SAMUEL IS13252 AS/NZS62368-1 UL62368-1 GB4943.1 Bauart gepruft Sicherheit egelma ge od o s be wac g www. tuv.com ID 2000000000 BS EN/EN62368-1 R33100 RoHS TPTC004 IEC62368-1 MODEL RS-15-3.3 RS-15-5 RS-15-12 RS-15-15 RS-15-24 RS-15-48 DC VOLTAGE 3.3V 5V 12V 15V 24V 48V RATED CURRENT 3A 3A 1.3A 1A 0.625A 0.313A CURRENT RANGE 0 ~ 3A 0 ~ 3A 0 ~ 1.3A 0 ~ 1A 0 ~ 0.625A 0 ~ 0.313A RATED POWER 9.9W 15W 15.6W 15W 15W 15.024W OUTPUT RIPPLE & NOISE (max.) Note.2 80mVp-p 80mVp-p 120mVp-p 120mVp-p VOLTAGE ADJ. RANGE 2.9 ~ 3.6V 4.75 ~ 5.5V 10.8 ~ 13.2V 13.5 ~ 16.5V VOLTAGE TOLERANCE Note.3 ±3.0% ±2.0% ±1.0% ±1.0% LINE REGULATION Note.4 ±0.5% ±0.5% ±0.5% ±0.5% LOAD REGULATION Note.5 ±2.0% ±1.5% ±0.5% ±0.5% SETUP, RISE TIME 1000ms, 30ms/230VAC 1000ms, 30ms/115VAC at full load 200mVp-p 22 ~ 27.6V ±1.0% ±0.5% ±0.5% 200mVp-p 43.2 ~ 52.8V ±1.0% ±0.5% ±0.5% HOLD UP TIME (Typ.) VOLTAGE RANGE 70ms/230VAC 12ms/115VAC at full load 85 ~ 264VAC 120 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz INPUT EFFICIENCY (Typ.) 72% 77% 81% 81% 82% 82% AC CURRENT (Typ.) 0.35A/115VAC 0.25A/230VAC INRUSH CURRENT (Typ.) COLD START 65A / 230VAC LEAKAGE CURRENT <2mA / 240VAC OVERLOAD Above 105% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed PROTECTION OVER VOLTAGE 3.8 ~ 4.45V 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V Protection type : Shut off o/p voltage, clamping by zener diode 28.4 ~ 32.4V 55.2 ~ 64.8V OVER TEMPERATURE Shut down o/p voltage, recovers automatically after temperature goes down WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE EMC (Note 6) ISOLATION RESISTANCE EMC EMISSION -20 ~ +70 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +85, 10 ~ 95% RH ±0.03%/ (0 ~ 50) 10 ~ 500Hz, 5G 10min./1cycle, period for 60min. each along X, Y, Z axes UL62368-1, TUV BS EN/EN62368-1 , AS/NZS 62368.1, EAC TP TC 004, CCC GB4943.1, BSMI CNS15598-1, BIS IS13252(Part1):2010/IEC 60950-1: 2005 approved I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25/ 70% RH Compliance to BS EN/EN55032 (CISPR32) Class B, BS EN/EN61000-3-2,-3,GB9254 class B,GB17625.1, EAC TP TC 020, CNS15936 Class B EMC IMMUNITY MTBF Compliance to BS EN/EN61000-4-2, 3, 4, 5, 6, 8,11, BS EN/EN55035, BS EN/EN61000-6-1, light industry level, EAC TP TC 020 4914.9K hrs min. Telcordia SR-332 (Bellcore) ; 1608.9K hrs min. MIL-HDBK-217F (25) OTHERS NOTE DIMENSION 62.5*51*28mm (L*W*H) PACKING 0.13Kg; 108pcs/15Kg/0.8CUFT 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1F & 47F parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Line regulation is measured from low line to high line at rated load. 5. Load regulation is measured from 0% to 100% rated load. 6. The power supply is considered a component which will be installed into a final equipment. All the EMC tests are been executed by mounting the unit on a 230mm*230mm metal plate with 1mm of thickness. The final equipment must be re-confirmed that it still meets EMC directives. For guidance on how to perform these EMC tests, please refer to EMI testing of component power supplies. (as available on https://www.meanwell.com//Upload/PDF/EMI_statement_en.pdf ) 7. The ambient temperature derating of 3.5/1000m with fanless models and of 5/1000m with fan models for operating altitude higher than 2000m(6500ft). Product Liability DisclaimerFor detailed information, please refer to https://www.meanwell.com/serviceDisclaimer.aspx File Name:RS-15-SPEC 2024-05-06 15W Single Output Switching Power Supply Mechanical Specification RS-15 series Case No.971A Unit:mm Terminal Pin No. Assignment Pin No. Assignment Pin No. 1 AC/L 4 2 AC/N 5 3 FG Assignment DC OUTPUT -V DC OUTPUT +V Block Diagram I/P EMI FILTER FG RECTIFIERS & FILTER 39.66±0.5 30.48±0.5 6±0.2 +V ADJ. 13 max. 1 2 3 4 2-M3 L=3 5 LED 39.1 62.5 14.65 2-M3 L=4 39.1 11.5 POWER SWITCHING PWM CONTROL RECTIFIERS & FILTER DETECTION CIRCUIT 15.1 28 25.25 51 fosc : 132KHz +V -V Derating Curve Output Derating VS Input Voltage 100 80 60 40 20 -20 0 10 20 30 40 50 60 70 (HORIZONTAL) AMBIENT TEMPERATURE () 100 90 80 70 60 50 40 85 95 100 115 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz LOAD (%) LOAD (%) File Name:RS-15-SPEC 2024-05-06