WOLFBOX Super Power Turbofan MegaFlow 100 User Manual

Preface

Thank you for purchasing WOLFBOX products. Our equipment is manufactured to high standards and will provide 24 months of trouble-free performance if used in accordance with these instructions and properly maintained.

If you have any questions about the product, please feel free to contact us.

Packing List

• Main Body
• Storage Bag
• Charging Cable
• Nozzles:
  • Inflatable Nozzle to Swimming Ring
  • Inflatable Nozzle to Inflatable Bed
  • Flat Nozzle
  • Round Nozzle
  • Long Nozzle
• Brush:
  • Soft Brush
  • Hard Brush
• User Manual
• Hand Rope

Product Introduction

Function

1. On/Off

   Long press the power button to turn the machine on/off. When turned on, it enters standby mode.

2. Initiate Blowing

   • Automatic mode: For first or second gear, short press the power button to adjust the gear. Click the start button to begin blowing, and click again to stop.
   • Manual mode: For third gear (maximum power), press and hold the on/off button to keep it running.

3. Gear Shift

   After turning on, click the power button to cycle through gears sequentially. The default gear upon power-on is the third gear.

   • First gear: low wind
   • Second gear: Moderate wind
   • Third gear: Super Wind

4. Insufflation

   • Inflatable bed: Attach the inflatable bed nozzle to the machine. Align the nozzle with the inflation valve of the inflatable bed and start the machine to inflate.
   • Inflatable Swimming Ring: Attach the inflatable swimming ring nozzle to the machine. Align the nozzle with the inflation valve of the swimming ring and start the machine to inflate.

5. Electricity Indicator

   A close-up view of the indicator lights on the device.
   • Charging: Indicator lights flash in sequence according to the power level.
   • Fully charged: All 4 indicator lights are fully illuminated.
   • Low battery: All 4 indicator lights flash down.

   Notice: Do not connect the power cable while the device is in use! ⚠️

6. Replacement of nozzles

   Diagrams illustrating nozzle replacement: A: Shows rotating a nozzle to remove it. B: Shows a replacement nozzle. C: Shows rotating a nozzle to attach it until a click is heard.
   • A: Rotate to remove the nozzle.
   • B: Replacement nozzle.
   • C: Rotary installation until you hear the click.

7. Intelligent protection function

   The product automatically shuts down after 3 minutes of standby without operation. ⚙️

Product Specification

Attention (Safety Precautions)

In order to minimize equipment malfunction, electric shock, injury, and device or property damage, please be sure to observe the following safety precautions:

I. Usage

• Please do not let the air inlet of the machine contact hair, as it can easily get trapped in the machine.
• Do not block the air inlet of the machine (especially with skin), otherwise the machine may be damaged due to overheating, or burn the user.
• Do not use the charging cable if it is seriously hot, or it may cause burns, electric shock, or fire due to short circuit.
• When using the device to inflate swimming ring accessories, due to the small air outlet and large air volume, the machine may generate significant heat. Please hold the machine, keeping your palm away from the power button.
• To ensure optimal performance of your MF100, please fully charge the battery before use.

II. Product storage

• Do not immerse the product in water. ?❌
• Keep the product dry; do not store or use the product in a humid environment.
• Do not store or use the equipment near liquefied petroleum gas or other flammable products (e.g., volatiles, paint thinners, sprays, etc.), which may lead to explosions or fires due to short circuits.
• Keep the product out of the reach of children and infants. ??
• When the machine is abnormal or malfunctioning, such as no air coming out, stopping frequently, reddening inside, or smoke coming out, please stop using it immediately. Using the product in these conditions may lead to injuries or fire due to short circuit.

Customer Service Center

If you have any problems with the function or installation, please feel free to reach us.