BlitzWolf BW-HP6 ANC Bluetooth Headphones User Manual
Product Information
Specifications
| Model | BW-HP6 |
|---|---|
| BT Version | V5.2 |
| BT Protocol | A2DPV1.3, AVRCPV1.5, HSPv1.2, HFPv1.5 |
| BT Code | SBC, AAC |
| Operating distance | 10M |
| Driver Unit | Ø40mm |
| Music playing time | up to 70h (ANC OFF) / up to 42h (ANC ON) |
| Charging time | about 2h |
| Charging voltage | 5V |
| Noise reduction performance | up to -22dB |
| Weight | 215.8g |
Product Usage Instructions
If you are experiencing signal interference, try reorienting or relocating the receiving antenna to improve reception.
To minimize interference between the equipment and the receiver, increase the physical separation between them.
For optimal performance, connect the equipment to a power outlet on a circuit different from that of the receiver.
If you encounter difficulties with setup or operation, consult the dealer or an experienced radio/TV technician for assistance.
Features
The headphones feature controls and ports on the earcups. On one earcup, there are buttons for Volume +, MFB (Multi-Function Button), and Volume -. On the other earcup, there is an LED indicator, an ANC (Active Noise Cancelling) ON/OFF button, a Type C charging port, and a microphone.
Pair headphone with Bluetooth devices
- Hold MFB button for 3 seconds before you hear Power on. The blue LED indicator flashes, and then enters pairing mode (the LED indicator's flashes blue and red).
- When in pairing mode, if not connected to a device, the headphone will automatically turn off within 5 minutes if no action is taken.
- Turn on the Bluetooth device you wish to pair with, and keep it within one-meter range of the headphone. Search for the pairing name "BW-HP6" in your device pairing list. Select/click pairing name "BW-HP6" until you hear the voice "device connected".
- Paired headphones will flash blue LED twice quickly when calling or pausing music play. No LED indicator when playing music.
Notes
- When the headphone is already paired with a device, it will alternately connect when both devices are powered on and stay within 1m. If you want to pair with another device, please disconnect the previous device first.
- If pairing is not successful, please switch off the headset firstly and then re-pair again.
Disconnecting from the Bluetooth device
- Hold the MFB button for about seven seconds to turn off the power.
Battery charging
- The headphone's battery must be recharged before use.
- The headphone's battery must be charged with the Type C cable included in the package as an accessory.
- Connect the Type C end of the cable to the appropriate charging port of the headphone, and the USB plug on the other end to a USB port on a computer or wall charger.
- When charging begins, the LED indicator on the headphones will light up red. Full charging takes about two hours; after charging is complete, the red LED indicator will turn off. When the battery is low, you will hear the message "Low Battery" every 5 minutes.
Notes:
- Battery charging time and usage time may vary depending on ambient temperature and usage frequency.
- Do not place metal objects near the headphone charging port, as this may cause dangerous electrical short circuits or overheating of the headphones.
- Ensure the charger voltage does not exceed 5V.
- To extend battery life, turn off the headphones after use.
- Do not attempt to replace the lithium-ion battery, which should last for the entire lifespan of the headphones.
- Please do not dispose of used batteries/electronic equipment with regular solid waste, as they contain toxic substances.
Functional operation
Music Playback
| Functions | Status of headphone | Operation |
|---|---|---|
| Play | pausing | Short press MFB button |
| Pause | Playing Music | Short press MFB button |
| Previous Track | Playing | Long press Volume - button |
| Next Track | Playing | Long press Volume + button |
| Volume + | Playing | Short press Volume + button |
| Volume - | Playing | Short press Volume - button |
Notes:
- When the maximum or minimum volume is set on the headphones, a "DIDI" sound will be heard.
Making calls with headphones
| Functions | Status of headset | Operation |
|---|---|---|
| Volume up | Conversation mode | Short press "+" button |
| Volume down | Conversation mode | Short press "-" button |
| Answering calling | Ringing | Short press MFB button |
| Reject calling | Ringing | Press and hold MFB button for one second, and release |
| Activate SIRI | Standby mode | Triply Press MFB button, and hear DIDI indicator sound. |
| Last number redial | Standby mode | Twice Press MFB button |
Notes:
- Not all mobile phones support all the functions listed above. Please refer to your mobile phone's manual. Some functions and indicator sounds may vary depending on the mobile phone.
Noise Reduction Function
- Clicking the ANC button will announce "Noise Canceling", allowing you to enjoy the headphones in Noise Canceling mode. If you no longer need Noise Canceling, click the ANC button again, it will announce "Off", and the green light will turn off.
Game Mode
- By quickly clicking the ANC button twice, you can switch to Game Mode, and you will hear "game mode". The same operation will turn off Game Mode, and you will hear "game mode off".
Troubleshooting
| Problem | Remedy |
|---|---|
| Power won't turn on | Recharge the wireless headphones. |
| The batteries will not charge | Confirm that the charger is ON. Confirm that the accessory USB to Type-C cable is securely connected to both the wireless headphone and charger. |
| Can't perform pairing | Place the wireless headphones and Bluetooth device closely together when performing pairing. |
| Can't perform Bluetooth connection | Confirm that power is turned on for both wireless headphones and Bluetooth device. Confirm that Bluetooth function is turned ON in the device you are connecting to. |
| No sound when playing music | Confirm that power is turned on for both wireless headphones and Bluetooth device. Confirm that connection with Bluetooth device is set for profile A2DP. Confirm that the connected music playback device is set for PLAY. Confirm that sound volume controls on both wireless headphones and music playback device are set to appropriate levels. |
| Sound is distorted when playing music | Check that no other devices utilizing the 2.4GHz wavelength are nearby, and that no obstructions block the signal path. |
| Can't use the hands-free operation | Confirm that wireless headphones and Bluetooth device are connected using the profile HFP or HSP. If the connection to the Bluetooth device is in profile A2DP, it may be necessary to change connection profiles (depending on the specifications of the Bluetooth device). |
| Communication distance is short, sound is garbled. | Check that no other devices utilizing the 2.4GHz wavelength (including microwave ovens, wireless radios, etc.) are nearby, and that no obstructions block the signal path. |
Important Safety Information
- Set the headphone volume to an appropriate level. Loud sound may damage your hearing.
- Do not set the volume so high that you cannot hear what is happening around you.
- Use caution or temporarily discontinue use in potentially dangerous situations.
- Do not use headphones while cycling, riding a motorcycle, or driving a car. Using headphones may cause a traffic hazard and is illegal in many areas.
- Do not expose headphones to fire or throw them into a fire. This will likely cause an accident.
- Do not disassemble the headphones unless you are an expert.
- Store in a place inaccessible to small children to prevent accidental ingestion of small parts.
WARNING
- These headphones are not waterproof. To prevent fire or electric shock hazards, do not place any liquid-filled containers (such as vases or pots) near them, nor expose them to dripping, splashing, rain, or moisture.
- To avoid fire risk, do not place sources of open flame (e.g., a lit candle) on the headphones.
- Charge the battery in a location where the temperature is between 5°C and 40°C. Lower or higher ambient temperatures will affect battery life.
Contact Information
VISHTEC Ltd
Address: 3 piętro biuro 5, Plovdiv 2 Liuben Karavelov bul, 4002 Bułgaria
E-mail: compliance@vish-tec.com
Telefon: +359 32 540 357
VISHTEC UK Co.,Ltd
Address: 275 ISLINGTON SUITE 1405 NEW NORTH ROAD LONDON ENGLAND N1 7AA
E-mail: Vincent.feng@vish-tec.com
Telefon: +44 1584 879 384
Frequently Asked Questions
- P: What should I do if there is signal interference?
- A: Try changing the orientation or position of the receiving antenna to get better reception. Increasing the distance between the equipment and the receiver may also help.
- P: Are there any restrictions on using the device regarding radio frequency exposure?
- A: The device has been evaluated to meet general radio frequency exposure requirements and can be used in portable exposure conditions without restriction.
Documents / Resources
[pdf] User Manual: BlitzWolf BW-HP6 ANC Bluetooth Headphones User Manual
Related documents: BW-HP6, BlitzWolf BW-HP6 ANC, Bluetooth ANC Headphones, Bluetooth Headphones, Headphones
References
Manuals+, Privacy Policy
This website is an independent publication and is not affiliated with or endorsed by any trademark owners. The "Bluetooth®" word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. The "Wi-Fi®" word mark and logos are registered trademarks owned by Wi-Fi Alliance. Any use of these marks on this website does not imply any affiliation or endorsement.
