ALLPOWERS S1500 PLUS Portable Power Station

Welcome

Thank you for purchasing and using this portable solar power generation and energy storage device. The product combines solar power generation technology, energy storage technology (real-time management of charging and discharging through mobile apps) to achieve mobile and off-grid applications of solar energy and energy storage products, providing more convenience and possibilities for our daily lives. We sincerely hope that before you embark on your journey of off-grid electricity use, you will carefully read this manual or at least read the following usage instructions (in addition, please also keep this manual properly for future use).

Notice Before Use

1. Before outdoor use, please ensure that the remaining power of the system is not too low. The electrical energy consumed by the appliances first comes from the battery pack inside the system rather than the external solar panels. (Solar cells need sufficient sunlight to effectively convert light energy into electrical energy and store it in the battery pack for later use.)
2. Before using it for the first time, we suggest that you connect the mains power to fully charge the product before using it. (In addition, the battery pack will experience temperature rise during the charging and discharging process. It is necessary to ensure good ventilation in the usage environment to assist in heat dissipation, and to keep away from all combustible or potentially combustible materials or conductor materials.)
3. Compared to common maintenance-free lead-acid batteries, the system uses lithium batteries with higher specific capacity and lower self-discharge rate, but they have relatively high requirements for usage and storage environment. Please be sure to use and store in the designated environment. Improper usage habits may shorten the service life of the product. Suggested usage and storage temperature: 0~+40 (°C)/32~104 (°F).
4. Before providing emergency power to household appliances through mains power, please make sure that the rated power of your household appliances does not exceed 1500W and the surge power does not exceed 3000W (some household appliances require high-power support during startup, and the instantaneous power during startup may be three times their rated working power. If customers have any questions, they can refer to the product manual or consult your product dealer, and they can generally get a proper answer.)
5. Different countries have different indoor electricity standards (US/JP 110V 60Hz or EU/UK/CN 230V AU 240V 50Hz). To avoid being unable to use, please choose the appropriate version according to the local electricity standards.

Product Diagram

Front View:

• Handle: Located at the top for carrying.
• LCD Display Screen: Shows status information.
• Cigarette Lighter Output Port: A 12V DC output port.
• DC Output Port: Another DC output port.
• AC Button: Button to control AC output.
• DC Button: Button to control DC output.
• Power Switch Button: Main power on/off.
• AC Output Ports: Four AC outlets.
• USB-C Output Ports: Two USB-C ports.
• USB-A Output Ports: Two USB-A ports.
• LED Light: Integrated LED light.
• LED Light ON/OFF: Button to control the LED light.

Rear View:

• MPPT XT60 Input Port: For solar panel input.
• AC Input Port: For charging from the mains.
• Heat Dissipation Port: Vents for cooling.

Connect to APP

To connect the power station to the ALLPOWERS mobile app, follow these steps:

1. Download the app by scanning the provided QR codes (one for Android 4.3 or above, one for iOS 9.0 or above).
2. Ensure your phone's Bluetooth function is turned on and phone positioning is enabled.
3. Long press the DC button on the power station to turn on Bluetooth. A Bluetooth icon ? will appear on the screen.
4. Open the app and select "AP S1500 V3.0" from the "Select Your Device" interface for pairing.

After a successful Bluetooth connection, the app will display the connected device.

Mobile APP Operation Instructions

The mobile app provides control and monitoring of the power station. Key displays include:

• Display output remaining time: Shows estimated time until the battery is depleted.
• Display remaining battery capacity: Shows the current battery percentage.
• Display input power: Shows the power being received by the station.
• Display output power: Shows the total power being delivered to connected devices.
• Frequency switching options: Allows selection of 50Hz or 60Hz output.
• AC switch: Controls the AC output.
• DC switch: Controls the DC output.
• LED light ON/OFF: Controls the built-in LED light.

LCD Screen Interpretation

The LCD screen displays various status indicators:

• ① Bluetooth Symbol: Indicates Bluetooth connectivity. Stay away from other electronic devices to avoid interference.
• ② Cooling Fan Indicator: The cooling fan automatically starts when AC is turned on and stops when AC is turned off.
• ③ Input/Output Flags: Indicate the status of input and output operations.
• ④ Remaining Charging/Discharging Time: Displays the estimated time remaining for the current operation (e.g., 23:51).
• ⑤ USB Output Symbol: Indicates USB output is active.
• ⑥ Output/Input Power: Shows the current power flow.
• ⑦ AC Output Symbol: Indicates AC output is active.
• ⑧ USB-C Output Symbol: Indicates USB-C output is active.
• ⑨ Car Charging Port and Wireless Charging Output Symbols: Indicate these ports are active.

LED Light Control

Short press the LED button to cycle through different working modes of the LED light: Off, Half Bright, Full Bright, and SOS.

Charging Your Power Station

The power station can be charged via three methods:

• Charging from Wall Socket: Use the standard charging cable. Using an unapproved cable may lead to unstable power, overheating, or damage.
• Through the Car Cigarette Lighter: It is not recommended to charge using a depleted car battery when the car is not started, as it requires significant current from the battery to start the car.
• By Solar Energy (MPPT Charging 650W): This product can be charged using ALLPOWERS foldable solar chargers, flexible laminated solar modules, or other branded solar photovoltaic modules via the XT60 port. (An adapter cable may be required if not included.)

The estimated charging times are for reference only:

Solar Charging Factors

The charging effect of solar energy is closely related to factors such as solar module power, light intensity, and sunlight incidence angle. ☀️

Reminder: During the charging process, please turn off the laptop ? to reduce screen power consumption. The laptop battery can store full charge faster.

Optimal Lighting Time: Choose the period 2-3 hours before and after noon each day. More abundant sunlight and thinner clouds/mist bring the solar panel output closer to its theoretical peak power.

Optimal Angle of Sunlight Incidence: The inclination angle between the solar panel and the ground should be between 30-60 degrees. Install the solar panel as far south as possible to maximize solar radiation.

Avoid Obstructions: Regularly inspect photovoltaic modules and remove potential obstructions like trees or accumulated dust. Even minor obstructions can significantly reduce power output.

Seasonal Variation: Light radiation varies seasonally, but photoelectric conversion efficiency depends more on light intensity than temperature. Cold winter weather has a relatively limited impact on temporary charging effects.

How to Supply Power to Other Electrical Appliances and Loads

The power station offers various output ports:

• 2x USB-A Output: For smartphones, mobile power supplies, small USB fans, and other USB-powered devices.
• 2x USB-C Output: Supports PD fast charging protocol for devices like smartphones and mobile ultrabooks, with power transfer up to 100W.
• 1x DC 13V Output: For 12V LED lights and other small 12V devices. If a DC5525 charging adapter is not included, please contact for purchase. Single port output is up to 13V5A.
• 4x AC Output: For AC household appliances, laptops, etc. Ensure the rated power of your appliances does not exceed 1500W and surge power does not exceed 3000W. The AC output ports have short-circuit protection ⚡, but avoid liquids or moisture to prevent internal short circuits.
• 12V Car Cigarette Lighter Output: For mini car refrigerators ?? and other 12V devices. This port has short-circuit protection ⚡. Use the dust plug for protection when not in use.

Important Notes:

1. Before use, verify that the rated working voltage of your electrical appliances matches the output voltage of the system's ports. For AC output, check for the risk of overload.
2. For safety, when using USB AC output, press the control button to turn on the output mode. The LCD screen will light up and display the total output power.
3. After each output is completed, press the control button to exit the output mode to save energy, and then remove the electrical appliances. Remember to short press the control key to exit the AC output mode specifically.

Powering Loads with Different Rated Powers

When powering loads with different rated powers, you may notice:

If the load power is high (e.g., a small refrigerator ?), the battery drains quickly, and the actual total energy consumption is close to the nominal battery energy. However, when using a lower power consumer, the actual total energy consumption may differ significantly from the nominal battery energy, and the battery life might appear shorter than theoretically calculated. This is primarily due to the device's self-consumption power, which becomes more noticeable relative to lower consumer power draw.

Reference for Energy Supply Time of Common Electrical Appliances

The following table provides estimated runtimes for common appliances:

Note: DC power supply times are estimates for devices drawing DC power directly. AC power supply times are for devices powered via the AC outlets.

Precautions for Regular Maintenance and Storage

1. To ensure battery health and stable performance, fully charge the product at least every 90 days.
2. Handle the device with care to prevent collisions. Avoid contact with sharp objects, do not strike with force, and keep away from children.
3. To save energy, exit output mode and ensure control keys are turned off when your appliances are fully charged.
4. Battery performance and capacity can be affected by temperature (cold weather, high temperatures, direct sunlight). Use the device at room temperature (0°C - 40°C) and avoid outdoor or humid environments for long-term storage.
5. If you are in a cold location without AC power, store the device in a warm place and connect it to a power source (preferably 5-10W solar panels). The natural heat generated during charging helps maintain optimal battery capacity.
6. It is recommended to maintain at least 20% of the remaining battery capacity during normal use. Frequently depleting the battery to 0% can damage the recyclable life of the battery cells.

Technical Specifications

List of Accessories

• ALLPOWERS S1500 PLUS Portable Power Station
• AC Charging Cable
• User Manual

Frequently Asked Questions (FAQ)

1. Can I use the product to power other appliances while the main unit is charging?

Yes, the product supports simultaneous charging and discharging, allowing you to connect other electronic loads while charging the product.

2. If the product is not used frequently, how often does it need to be charged?

Rechargeable batteries have varying degrees of self-discharge. Battery capacity decline is related to storage environment and usage habits. We recommend fully charging the product at least every three months. Otherwise, long-term low battery charge can exacerbate the deterioration of the battery's active material quality, leading to irreversible loss of battery capacity.

3. How to determine if multiple appliances can be used simultaneously? If not, will it cause damage to my equipment?

When AC supplies power to multiple electrical appliances simultaneously, if the total power is too high, the energy storage system will prompt overcurrent or overload faults and turn off the AC output. This is a normal protection mechanism and will not cause damage.

4. Can the product be carried on an airplane?

This product cannot be transported by passenger aircraft. Please choose shipping or freight. Additionally, before shipment, it is necessary to refer to local air traffic regulations to make reasonable arrangements.

Disposal Guidelines

1. If conditions permit, ensure the battery is completely depleted before discarding it in the designated battery recycling bin. Batteries containing potentially hazardous chemicals must not be disposed of in regular trash cans. Please comply with local laws and regulations on battery recycling and disposal.
2. If the battery cannot be fully discharged due to product malfunction, do not discard it directly into the battery recycling box. Please contact a professional battery recycling company for further processing.
3. Please discard excessively discharged batteries that cannot be charged.

Contact Us

If you have any questions or need assistance with our products and services, please email us at support@allpowers.com. We will provide assistance within 1 working day. Please clearly indicate in the email the possible causes and specific details of any defects in your product.

Our official website: www.iallpowers.com