LeuchtenDirekt FRAME 996645 Outdoor Wall Light

Product Information

Model Number: 996645

Product Name: FRAME

Voltage: 230V~50Hz

Bulb Type: 1x E27 / 60W (not included)

Included Accessories: 2x screws, 2x wall plugs

Installation Instructions

Please follow these steps carefully for safe and correct installation:

1. Preparation: Ensure the power supply is switched off before starting installation. The diagram shows a connection terminal block (1) with wires labeled 'N' (Neutral) and 'L' (Live).

2. Mounting Bracket: Drill a hole of 8mm diameter (indicated by Ø8mm) in the wall. Attach the mounting bracket to the wall using the provided screws and wall plugs (2). The diagram shows a rotational arrow (3) indicating the direction of screw tightening.

3. Wiring: Connect the wires from the light fixture to the corresponding wires in the wall using the terminal block (4). The diagram shows wire connections labeled 'a' and 'b', corresponding to 'N' and 'L' respectively. Ensure secure connections.

4. Attaching the Fixture: Slide the light fixture onto the mounting bracket (5). Secure the fixture in place (6). The diagram shows a rotational arrow (6) indicating the tightening of a securing screw.

5. Installing the Bulb: Screw in the appropriate E27 bulb (7) with a maximum wattage of 60W. The diagram shows a rotational arrow (7) indicating screwing in the bulb.

6. Final Check: Ensure all connections are secure and the fixture is firmly mounted. The diagram shows a terminal block (8) with multiple connection points.

Note: The diagram indicates that the light is suitable for dimming if a suitable dimmer and bulb are used (indicated by sun symbols with arrows).

Safety and Usage

This luminaire is intended for outdoor use. Ensure proper installation to prevent water ingress. Always consult a qualified electrician if you are unsure about any part of the installation process.