User Manual: 2.4G + Bluetooth Wireless Mouse

Product Function

This section details the components and features of the wireless mouse.

Mouse Components:

• Left Button
• Right Button
• Scroll Wheel
• USB Indicator
• Bluetooth 1 Indicator
• Bluetooth 2 Indicator
• Mode Switch Button
• DPI Button
• DPI Indicator
• Battery Bay
• USB Receiver
• On/Off Switch
• Forward Button
• Back Button

Note: Bluetooth indicator/USB indicator flashes quickly on low battery.

2.4G Connection

Follow these steps to connect the mouse using the 2.4G wireless connection:

1. Turn on the mouse using the On/Off switch.
2. Remove the USB receiver from its storage slot on the mouse.
3. Insert the USB receiver into an available USB port on your computer.
4. Press the mode switch button until the white LED indicator turns on, signifying 2.4G mode.

Diagram Description: Visual guide showing the mouse, the USB receiver, and a computer's USB port for connection.

Bluetooth Connection

This mouse supports Bluetooth connectivity for up to two devices.

Windows System (Example: Windows 10)

1. Turn on the mouse.
2. Press the multi-mode toggle button until the white indicator light flashes slowly.
3. Press and hold the toggle button for 3-5 seconds until the white light flashes quickly. The mouse is now in Bluetooth pairing mode.
4. On your computer, click the "Bluetooth devices" button.
5. Click the "Add or remove Bluetooth devices" button.
6. Search for the Bluetooth device named "BT 4.0+2.4G Mouse" and click the "Pair" button.

Once connected, the mouse can be used normally. The Bluetooth indicator will show the connection status.

Diagram Description: Screenshots illustrating the process of adding a Bluetooth device in Windows 10 settings.

Mac OS System

Please complete steps 1-3 for turning on and initiating pairing mode before proceeding.

1. Click the "System Preferences" button on your Mac.
2. Click the "Bluetooth" button within the System Preferences window.
3. Search for the Bluetooth device named "BT 4.0+2.4G Mouse" and click the "Pair" button.

Once pairing is complete, the mouse can be used normally.

Diagram Description: Visual guide showing the Bluetooth settings within Mac OS System Preferences.

Ways of Mode Switching

When both Bluetooth and 2.4G connections are established, you can switch between modes by shortly pressing the multi-mode toggle button.

• 2.4G Mode: Indicated by a solid white light.
• Bluetooth 1 Mode: Indicated by a solid white light.
• Bluetooth 2 Mode: Indicated by a solid white light.

Diagram Description: An illustration showing the mouse and the location of the multi-mode toggle button for switching connections.

Basic Parameters

Package Includes

• 1x Wireless Mouse
• 1x USB Receiver
• 1x Manual

Notes and Compliance

FCC Compliance Information:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.